linux-kernel - Re: [PATCH v2 2/3] cpufreq: qcom-nvmem: Enable virtual power domain devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPDyKFooPLCmJeqjhiMm7HRdW5UrEw0yHvGF9fgLvOigsgbWxg@mail.gmail.com>
Date:   Tue, 24 Oct 2023 18:11:34 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Stephan Gerhold <stephan.gerhold@...nkonzept.com>
Cc:     Viresh Kumar <viresh.kumar@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Ilia Lin <ilia.lin@...nel.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-pm@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, Stephan Gerhold <stephan@...hold.net>,
        stable@...r.kernel.org
Subject: Re: [PATCH v2 2/3] cpufreq: qcom-nvmem: Enable virtual power domain devices

On Tue, 24 Oct 2023 at 15:07, Stephan Gerhold
<stephan.gerhold@...nkonzept.com> wrote:
>
> On Tue, Oct 24, 2023 at 02:49:32PM +0200, Ulf Hansson wrote:
> > On Tue, 24 Oct 2023 at 14:03, Stephan Gerhold
> > <stephan.gerhold@...nkonzept.com> wrote:
> > >
> > > On Thu, Oct 19, 2023 at 01:26:19PM +0200, Ulf Hansson wrote:
> > > > On Thu, 19 Oct 2023 at 12:24, Ulf Hansson <ulf.hansson@...aro.org> wrote:
> > > > >
> > > > > On Wed, 18 Oct 2023 at 10:06, Stephan Gerhold
> > > > > <stephan.gerhold@...nkonzept.com> wrote:
> > > > > >
> > > > > > The genpd core caches performance state votes from devices that are
> > > > > > runtime suspended as of commit 3c5a272202c2 ("PM: domains: Improve
> > > > > > runtime PM performance state handling"). They get applied once the
> > > > > > device becomes active again.
> > > > > >
> > > > > > To attach the power domains needed by qcom-cpufreq-nvmem the OPP core
> > > > > > calls genpd_dev_pm_attach_by_id(). This results in "virtual" dummy
> > > > > > devices that use runtime PM only to control the enable and performance
> > > > > > state for the attached power domain.
> > > > > >
> > > > > > However, at the moment nothing ever resumes the virtual devices created
> > > > > > for qcom-cpufreq-nvmem. They remain permanently runtime suspended. This
> > > > > > means that performance state votes made during cpufreq scaling get
> > > > > > always cached and never applied to the hardware.
> > > > > >
> > > > > > Fix this by enabling the devices after attaching them and use
> > > > > > dev_pm_syscore_device() to ensure the power domains also stay on when
> > > > > > going to suspend. Since it supplies the CPU we can never turn it off
> > > > > > from Linux. There are other mechanisms to turn it off when needed,
> > > > > > usually in the RPM firmware (RPMPD) or the cpuidle path (CPR genpd).
> > > > >
> > > > > I believe we discussed using dev_pm_syscore_device() for the previous
> > > > > version. It's not intended to be used for things like the above.
> > > > >
> > > > > Moreover, I was under the impression that it wasn't really needed. In
> > > > > fact, I would think that this actually breaks things for system
> > > > > suspend/resume, as in this case the cpr driver's genpd
> > > > > ->power_on|off() callbacks are no longer getting called due this,
> > > > > which means that the cpr state machine isn't going to be restored
> > > > > properly. Or did I get this wrong?
> > > >
> > > > BTW, if you really need something like the above, the proper way to do
> > > > it would instead be to call device_set_awake_path() for the device.
> > > >
> > >
> > > Unfortunately this does not work correctly. When I use
> > > device_set_awake_path() it does set dev->power.wakeup_path = true.
> > > However, this flag is cleared again in device_prepare() when entering
> > > suspend. To me it looks a bit like wakeup_path is not supposed to be set
> > > directly by drivers? Before and after your commit 8512220c5782 ("PM /
> > > core: Assign the wakeup_path status flag in __device_prepare()") it
> > > seems to be internally bound to device_may_wakeup().
> > >
> > > It works if I make device_may_wakeup() return true, with
> > >
> > >         device_set_wakeup_capable(dev, true);
> > >         device_wakeup_enable(dev);
> > >
> > > but that also allows *disabling* the wakeup from sysfs which doesn't
> > > really make sense for the CPU.
> > >
> > > Any ideas?
> >
> > The device_set_awake_path() should be called from a system suspend
> > callback. So you need to add that callback for the cpufreq driver.
> >
> > Sorry, if that wasn't clear.
> >
>
> Hmm, but at the moment I'm calling this on the virtual genpd devices.
> How would it work for them? I don't have a suspend callback for them.
>
> I guess could loop over the virtual devices in the cpufreq driver
> suspend callback, but is my driver suspend callback really guaranteed to
> run before the device_prepare() that clears "wakeup_path" on the virtual
> devices?

Yes, that's guaranteed. dpm_prepare() (which calls device_prepare())
is always being executed before dpm_suspend().

>
> Or is this the point where we need device links to make that work?
> A quick look suggests "wakeup_path" is just propagated to parents but
> not device links, so I don't think that would help, either.

I don't think we need device-links for this, at least the way things
are working currently.

Kind regards
Uffe