[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <e3198dd5-48da-498c-9f21-4f6845b37675@collabora.com>
Date: Tue, 24 Oct 2023 10:37:42 +0200
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: "Jason-JH.Lin" <jason-jh.lin@...iatek.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Chun-Kuang Hu <chunkuang.hu@...nel.org>
Cc: Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
dri-devel@...ts.freedesktop.org, linux-media@...r.kernel.org,
linaro-mm-sig@...ts.linaro.org,
Jason-ch Chen <jason-ch.chen@...iatek.com>,
Johnson Wang <johnson.wang@...iatek.com>,
Singo Chang <singo.chang@...iatek.com>,
Nancy Lin <nancy.lin@...iatek.com>,
Shawn Sung <shawn.sung@...iatek.com>,
Project_Global_Chrome_Upstream_Group@...iatek.com,
Jeffrey Kardatzke <jkardatzke@...gle.com>
Subject: Re: [PATCH v2 05/11] drm/mediatek: Add mtk_ddp_sec_write to config
secure buffer info
Il 23/10/23 06:45, Jason-JH.Lin ha scritto:
> Add mtk_ddp_sec_write to configure secure buffer information to
> cmdq secure packet data.
> Then secure cmdq driver will use these information to configure
> curresponding secure DRAM address to HW overlay in secure world.
>
> Signed-off-by: Jason-JH.Lin <jason-jh.lin@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 12 ++++++++++++
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 4 ++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 771f4e173353..3dca936b9143 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -111,6 +111,18 @@ void mtk_ddp_write_mask(struct cmdq_pkt *cmdq_pkt, unsigned int value,
> #endif
> }
>
> +void mtk_ddp_sec_write(struct cmdq_pkt *cmdq_pkt, u32 addr, u64 base,
> + const enum cmdq_iwc_addr_metadata_type type,
> + const u32 offset, const u32 size, const u32 port)
> +{
> +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> + /* secure buffer will be 4K alignment */
> + if (cmdq_pkt)
if (!cmdq_pkt)
return;
cmdq_sec_pkt_write....
Regards,
Angelo
Powered by blists - more mailing lists