| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <o4t2ys2n7p7seunbd4v6nlpbeejewtutuytt4aastyild6otor@l56xftgefgiv>
Date: Tue, 24 Oct 2023 10:38:45 +0200
From: Jacopo Mondi <jacopo.mondi@...asonboard.com>
To: Sebastian Reichel <sre@...nel.org>
Cc: Sakari Ailus <sakari.ailus@...ux.intel.com>,
Jacopo Mondi <jacopo.mondi@...asonboard.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 4/4] media: i2c: gc0308: new driver
Hi Sebastian
On Tue, Oct 24, 2023 at 02:59:53AM +0200, Sebastian Reichel wrote:
> Introduce new driver for GalaxyCore GC0308, which is a cheap
> 640x480 with an on-chip ISP sensor sold since 2010. Data is
> provided via parallel bus.
>
> Signed-off-by: Sebastian Reichel <sre@...nel.org>
> ---
> MAINTAINERS | 7 +
> drivers/media/i2c/Kconfig | 14 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/gc0308.c | 1418 ++++++++++++++++++++++++++++++++++++
> 4 files changed, 1440 insertions(+)
> create mode 100644 drivers/media/i2c/gc0308.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5f64cd42ff37..f03fd34067d0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8627,6 +8627,13 @@ F: drivers/mfd/gateworks-gsc.c
> F: include/linux/mfd/gsc.h
> F: include/linux/platform_data/gsc_hwmon.h
>
> +GC0308 GALAXYCORE CAMERA SENSOR DRIVER
> +M: Sebastian Reichel <sre@...nel.org>
> +L: linux-media@...r.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
> +F: drivers/media/i2c/gc0308.c
> +
> GCC PLUGINS
> M: Kees Cook <keescook@...omium.org>
> L: linux-hardening@...r.kernel.org
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 74ff833ff48c..7db4abc0ef88 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -50,6 +50,20 @@ config VIDEO_AR0521
> To compile this driver as a module, choose M here: the
> module will be called ar0521.
>
> +config VIDEO_GC0308
> + tristate "GalaxyCore GC0308 sensor support"
> + depends on I2C && VIDEO_DEV
> + select MEDIA_CONTROLLER
> + select VIDEO_V4L2_SUBDEV_API
> + select V4L2_FWNODE
The top-level VIDEO_CAMERA_SENSOR menu already
depends on MEDIA_CAMERA_SUPPORT && I2C
select MEDIA_CONTROLLER
select V4L2_FWNODE
select VIDEO_V4L2_SUBDEV_API
So you can omit them
> + select REGMAP_I2C
Annoying questions, is this driver compatible with the newly
introduced CCI helpers ? Not that pressing as you're on regmap so you
haven't your own read/write routines.
> + help
> + This is a Video4Linux2 sensor driver for the GalaxyCore
> + GC0308 camera.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called gc0308.
> +
> config VIDEO_HI556
> tristate "Hynix Hi-556 sensor support"
> help
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 80b00d39b48f..f03a21f2962a 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -36,6 +36,7 @@ obj-$(CONFIG_VIDEO_DW9719) += dw9719.o
> obj-$(CONFIG_VIDEO_DW9768) += dw9768.o
> obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o
> obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8/
> +obj-$(CONFIG_VIDEO_GC0308) += gc0308.o
> obj-$(CONFIG_VIDEO_HI556) += hi556.o
> obj-$(CONFIG_VIDEO_HI846) += hi846.o
> obj-$(CONFIG_VIDEO_HI847) += hi847.o
> diff --git a/drivers/media/i2c/gc0308.c b/drivers/media/i2c/gc0308.c
> new file mode 100644
> index 000000000000..f6e02284b661
> --- /dev/null
> +++ b/drivers/media/i2c/gc0308.c
> @@ -0,0 +1,1418 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for the GalaxyCore GC0308 camera sensor.
> + *
> + * Copyright (c) 2023 Sebastian Reichel <sre@...nel.org>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +/* Analog & CISCTL*/
> +#define GC0308_CHIP_ID 0x000
> +#define GC0308_HBLANK 0x001
> +#define GC0308_VBLANK 0x002
> +#define GC0308_EXPH 0x003
> +#define GC0308_EXPL 0x004
> +#define GC0308_ROW_STARTH 0x005
> +#define GC0308_ROW_STARTL 0x006
> +#define GC0308_COL_STARTH 0x007
> +#define GC0308_COL_STARTL 0x008
> +#define GC0308_WIN_HEIGHTH 0x009
> +#define GC0308_WIN_HEIGHTL 0x00a
> +#define GC0308_WIN_WIDTHH 0x00b
> +#define GC0308_WIN_WIDTHL 0x00c
> +#define GC0308_VS_ST 0x00d
> +#define GC0308_VS_ET 0x00e
> +#define GC0308_VB_HB 0x00f
> +#define GC0308_RSH_WIDTH 0x010
> +#define GC0308_TSP_WIDTH 0x011
> +#define GC0308_SH_DELAY 0x012
> +#define GC0308_ROW_TAIL_WIDTH 0x013
> +#define GC0308_CISCTL_MODE1 0x014
> +#define GC0308_CISCTL_MODE2 0x015
> +#define GC0308_CISCTL_MODE3 0x016
> +#define GC0308_CISCTL_MODE4 0x017
> +#define GC0308_ANALOG_MODE1 0x01a
> +#define GC0308_ANALOG_MODE2 0x01b
> +#define GC0308_HRST_RSG_V18 0x01c
> +#define GC0308_VREF_V25 0x01d
> +#define GC0308_ADC_R 0x01e
> +#define GC0308_PAD_DRV 0x01f
> +#define GC0308_SOFT_RESET 0x0fe
> +
> +/* ISP */
> +#define GC0308_BLOCK_EN1 0x020
> +#define GC0308_BLOCK_EN2 0x021
> +#define GC0308_AAAA_EN 0x022
> +#define GC0308_SPECIAL_EFFECT 0x023
> +#define GC0308_OUT_FORMAT 0x024
> +#define GC0308_OUT_EN 0x025
> +#define GC0308_SYNC_MODE 0x026
> +#define GC0308_CLK_DIV_MODE 0x028
> +#define GC0308_BYPASS_MODE 0x029
> +#define GC0308_CLK_GATING 0x02a
> +#define GC0308_DITHER_MODE 0x02b
> +#define GC0308_DITHER_BIT 0x02c
> +#define GC0308_DEBUG_MODE1 0x02d
> +#define GC0308_DEBUG_MODE2 0x02e
> +#define GC0308_DEBUG_MODE3 0x02f
> +#define GC0308_CROP_WIN_MODE 0x046
> +#define GC0308_CROP_WIN_Y1 0x047
> +#define GC0308_CROP_WIN_X1 0x048
> +#define GC0308_CROP_WIN_HEIGHTH 0x049
> +#define GC0308_CROP_WIN_HEIGHTL 0x04a
> +#define GC0308_CROP_WIN_WIDTHH 0x04b
> +#define GC0308_CROP_WIN_WIDTHL 0x04c
> +
> +/* BLK */
> +#define GC0308_BLK_MODE 0x030
> +#define GC0308_BLK_LIMIT_VAL 0x031
> +#define GC0308_GLOBAL_OFF 0x032
> +#define GC0308_CURRENT_R_OFF 0x033
> +#define GC0308_CURRENT_G_OFF 0x034
> +#define GC0308_CURRENT_B_OFF 0x035
> +#define GC0308_CURRENT_R_DARK_CURRENT 0x036
> +#define GC0308_CURRENT_G_DARK_CURRENT 0x037
> +#define GC0308_CURRENT_B_DARK_CURRENT 0x038
> +#define GC0308_EXP_RATE_DARKC 0x039
> +#define GC0308_OFF_SUBMODE 0x03a
> +#define GC0308_DARKC_SUBMODE 0x03b
> +#define GC0308_MANUAL_G1_OFF 0x03c
> +#define GC0308_MANUAL_R1_OFF 0x03d
> +#define GC0308_MANUAL_B2_OFF 0x03e
> +#define GC0308_MANUAL_G2_OFF 0x03f
> +
> +/* PREGAIN */
> +#define GC0308_GLOBAL_GAIN 0x050
> +#define GC0308_AUTO_PREGAIN 0x051
> +#define GC0308_AUTO_POSTGAIN 0x052
> +#define GC0308_CHANNEL_GAIN_G1 0x053
> +#define GC0308_CHANNEL_GAIN_R 0x054
> +#define GC0308_CHANNEL_GAIN_B 0x055
> +#define GC0308_CHANNEL_GAIN_G2 0x056
> +#define GC0308_R_RATIO 0x057
> +#define GC0308_G_RATIO 0x058
> +#define GC0308_B_RATIO 0x059
> +#define GC0308_AWB_R_GAIN 0x05a
> +#define GC0308_AWB_G_GAIN 0x05b
> +#define GC0308_AWB_B_GAIN 0x05c
> +#define GC0308_LSC_DEC_LVL1 0x05d
> +#define GC0308_LSC_DEC_LVL2 0x05e
> +#define GC0308_LSC_DEC_LVL3 0x05f
> +
> +/* DNDD */
> +#define GC0308_DN_MODE_EN 0x060
> +#define GC0308_DN_MODE_RATIO 0x061
> +#define GC0308_DN_BILAT_B_BASE 0x062
> +#define GC0308_DN_B_INCR 0x063
> +#define GC0308_DN_BILAT_N_BASE 0x064
> +#define GC0308_DN_N_INCR 0x065
> +#define GC0308_DD_DARK_BRIGHT_TH 0x066
> +#define GC0308_DD_FLAT_TH 0x067
> +#define GC0308_DD_LIMIT 0x068
> +
> +/* ASDE - Auto Saturation De-noise and Edge-Enhancement */
> +#define GC0308_ASDE_GAIN_TRESH 0x069
> +#define GC0308_ASDE_GAIN_MODE 0x06a
> +#define GC0308_ASDE_DN_SLOPE 0x06b
> +#define GC0308_ASDE_DD_BRIGHT 0x06c
> +#define GC0308_ASDE_DD_LIMIT 0x06d
> +#define GC0308_ASDE_AUTO_EE1 0x06e
> +#define GC0308_ASDE_AUTO_EE2 0x06f
> +#define GC0308_ASDE_AUTO_SAT_DEC_SLOPE 0x070
> +#define GC0308_ASDE_AUTO_SAT_LOW_LIMIT 0x071
> +
> +/* INTPEE - Interpolation and Edge-Enhancement */
> +#define GC0308_EEINTP_MODE_1 0x072
> +#define GC0308_EEINTP_MODE_2 0x073
> +#define GC0308_DIRECTION_TH1 0x074
> +#define GC0308_DIRECTION_TH2 0x075
> +#define GC0308_DIFF_HV_TI_TH 0x076
> +#define GC0308_EDGE12_EFFECT 0x077
> +#define GC0308_EDGE_POS_RATIO 0x078
> +#define GC0308_EDGE1_MINMAX 0x079
> +#define GC0308_EDGE2_MINMAX 0x07a
> +#define GC0308_EDGE12_TH 0x07b
> +#define GC0308_EDGE_MAX 0x07c
> +
> +/* ABB - Auto Black Balance */
> +#define GC0308_ABB_MODE 0x080
> +#define GC0308_ABB_TARGET_AVGH 0x081
> +#define GC0308_ABB_TARGET_AVGL 0x082
> +#define GC0308_ABB_LIMIT_VAL 0x083
> +#define GC0308_ABB_SPEED 0x084
> +#define GC0308_CURR_R_BLACK_LVL 0x085
> +#define GC0308_CURR_G_BLACK_LVL 0x086
> +#define GC0308_CURR_B_BLACK_LVL 0x087
> +#define GC0308_CURR_R_BLACK_FACTOR 0x088
> +#define GC0308_CURR_G_BLACK_FACTOR 0x089
> +#define GC0308_CURR_B_BLACK_FACTOR 0x08a
> +
> +/* LSC - Lens Shading Correction */
> +#define GC0308_LSC_RED_B2 0x08b
> +#define GC0308_LSC_GREEN_B2 0x08c
> +#define GC0308_LSC_BLUE_B2 0x08d
> +#define GC0308_LSC_RED_B4 0x08e
> +#define GC0308_LSC_GREEN_B4 0x08f
> +#define GC0308_LSC_BLUE_B4 0x090
> +#define GC0308_LSC_ROW_CENTER 0x091
> +#define GC0308_LSC_COL_CENTER 0x092
> +
> +/* CC - Channel Coefficient */
> +#define GC0308_CC_MATRIX_C11 0x093
> +#define GC0308_CC_MATRIX_C12 0x094
> +#define GC0308_CC_MATRIX_C13 0x095
> +#define GC0308_CC_MATRIX_C21 0x096
> +#define GC0308_CC_MATRIX_C22 0x097
> +#define GC0308_CC_MATRIX_C23 0x098
> +#define GC0308_CC_MATRIX_C41 0x09c
> +#define GC0308_CC_MATRIX_C42 0x09d
> +#define GC0308_CC_MATRIX_C43 0x09e
> +
> +/* GAMMA */
> +#define GC0308_GAMMA_OUT0 0x09f
> +#define GC0308_GAMMA_OUT1 0x0a0
> +#define GC0308_GAMMA_OUT2 0x0a1
> +#define GC0308_GAMMA_OUT3 0x0a2
> +#define GC0308_GAMMA_OUT4 0x0a3
> +#define GC0308_GAMMA_OUT5 0x0a4
> +#define GC0308_GAMMA_OUT6 0x0a5
> +#define GC0308_GAMMA_OUT7 0x0a6
> +#define GC0308_GAMMA_OUT8 0x0a7
> +#define GC0308_GAMMA_OUT9 0x0a8
> +#define GC0308_GAMMA_OUT10 0x0a9
> +#define GC0308_GAMMA_OUT11 0x0aa
> +#define GC0308_GAMMA_OUT12 0x0ab
> +#define GC0308_GAMMA_OUT13 0x0ac
> +#define GC0308_GAMMA_OUT14 0x0ad
> +#define GC0308_GAMMA_OUT15 0x0ae
> +#define GC0308_GAMMA_OUT16 0x0af
> +
> +/* YCP */
> +#define GC0308_GLOBAL_SATURATION 0x0b0
> +#define GC0308_SATURATION_CB 0x0b1
> +#define GC0308_SATURATION_CR 0x0b2
> +#define GC0308_LUMA_CONTRAST 0x0b3
> +#define GC0308_CONTRAST_CENTER 0x0b4
> +#define GC0308_LUMA_OFFSET 0x0b5
> +#define GC0308_SKIN_CB_CENTER 0x0b6
> +#define GC0308_SKIN_CR_CENTER 0x0b7
> +#define GC0308_SKIN_RADIUS_SQUARE 0x0b8
> +#define GC0308_SKIN_BRIGHTNESS 0x0b9
> +#define GC0308_FIXED_CB 0x0ba
> +#define GC0308_FIXED_CR 0x0bb
> +#define GC0308_EDGE_DEC_SA 0x0bd
> +#define GC0308_AUTO_GRAY_MODE 0x0be
> +#define GC0308_SATURATION_SUB_STRENGTH 0x0bf
> +#define GC0308_Y_GAMMA_OUT0 0x0c0
> +#define GC0308_Y_GAMMA_OUT1 0x0c1
> +#define GC0308_Y_GAMMA_OUT2 0x0c2
> +#define GC0308_Y_GAMMA_OUT3 0x0c3
> +#define GC0308_Y_GAMMA_OUT4 0x0c4
> +#define GC0308_Y_GAMMA_OUT5 0x0c5
> +#define GC0308_Y_GAMMA_OUT6 0x0c6
> +#define GC0308_Y_GAMMA_OUT7 0x0c7
> +#define GC0308_Y_GAMMA_OUT8 0x0c8
> +#define GC0308_Y_GAMMA_OUT9 0x0c9
> +#define GC0308_Y_GAMMA_OUT10 0x0ca
> +#define GC0308_Y_GAMMA_OUT11 0x0cb
> +#define GC0308_Y_GAMMA_OUT12 0x0cc
> +
> +/* AEC - Automatic Exposure Control */
> +#define GC0308_AEC_MODE1 0x0d0
> +#define GC0308_AEC_MODE2 0x0d1
> +#define GC0308_AEC_MODE3 0x0d2
> +#define GC0308_AEC_TARGET_Y 0x0d3
> +#define GC0308_Y_AVG 0x0d4
> +#define GC0308_AEC_HIGH_LOW_RANGE 0x0d5
> +#define GC0308_AEC_IGNORE 0x0d6
> +#define GC0308_AEC_LIMIT_HIGH_RANGE 0x0d7
> +#define GC0308_AEC_R_OFFSET 0x0d9
> +#define GC0308_AEC_GB_OFFSET 0x0da
> +#define GC0308_AEC_SLOW_MARGIN 0x0db
> +#define GC0308_AEC_FAST_MARGIN 0x0dc
> +#define GC0308_AEC_EXP_CHANGE_GAIN 0x0dd
> +#define GC0308_AEC_STEP2_SUNLIGHT 0x0de
> +#define GC0308_AEC_I_FRAMES 0x0df
> +#define GC0308_AEC_I_STOP_L_MARGIN 0x0e0
> +#define GC0308_AEC_I_STOP_MARGIN 0x0e1
> +#define GC0308_ANTI_FLICKER_STEP_H 0x0e2
> +#define GC0308_ANTI_FLICKER_STEP_L 0x0e3
> +#define GC0308_EXP_LVL_1H 0x0e4
> +#define GC0308_EXP_LVL_1L 0x0e5
> +#define GC0308_EXP_LVL_2H 0x0e6
> +#define GC0308_EXP_LVL_2L 0x0e7
> +#define GC0308_EXP_LVL_3H 0x0e8
> +#define GC0308_EXP_LVL_3L 0x0e9
> +#define GC0308_EXP_LVL_4H 0x0ea
> +#define GC0308_EXP_LVL_4L 0x0eb
> +#define GC0308_MAX_EXP_LVL 0x0ec
> +#define GC0308_EXP_MIN_L 0x0ed
> +#define GC0308_MAX_POST_DF_GAIN 0x0ee
> +#define GC0308_MAX_PRE_DG_GAIN 0x0ef
> +
> +/* ABS */
> +#define GC0308_ABS_RANGE_COMP 0x0f0
> +#define GC0308_ABS_STOP_MARGIN 0x0f1
> +#define GC0308_Y_S_COMP 0x0f2
> +#define GC0308_Y_STRETCH_LIMIT 0x0f3
> +#define GC0308_Y_TILT 0x0f4
> +#define GC0308_Y_STRETCH 0x0f5
> +
> +/* Measure Window */
> +#define GC0308_BIG_WIN_X0 0x0f7
> +#define GC0308_BIG_WIN_Y0 0x0f8
> +#define GC0308_BIG_WIN_X1 0x0f9
> +#define GC0308_BIG_WIN_Y1 0x0fa
> +#define GC0308_DIFF_Y_BIG_THD 0x0fb
> +
> +/* OUT Module (P1) */
> +#define GC0308_CLOSE_FRAME_EN 0x150
> +#define GC0308_CLOSE_FRAME_NUM1 0x151
> +#define GC0308_CLOSE_FRAME_NUM2 0x152
> +#define GC0308_BAYER_MODE 0x153
> +#define GC0308_SUBSAMPLE 0x154
> +#define GC0308_SUBMODE 0x155
> +#define GC0308_SUB_ROW_N1 0x156
> +#define GC0308_SUB_ROW_N2 0x157
> +#define GC0308_SUB_COL_N1 0x158
> +#define GC0308_SUB_COL_N2 0x159
> +
> +/* AWB (P1) - Auto White Balance */
> +#define GC0308_AWB_RGB_HIGH_LOW 0x100
> +#define GC0308_AWB_Y_TO_C_DIFF2 0x102
> +#define GC0308_AWB_C_MAX 0x104
> +#define GC0308_AWB_C_INTER 0x105
> +#define GC0308_AWB_C_INTER2 0x106
> +#define GC0308_AWB_C_MAX_BIG 0x108
> +#define GC0308_AWB_Y_HIGH 0x109
> +#define GC0308_AWB_NUMBER_LIMIT 0x10a
> +#define GC0308_KWIN_RATIO 0x10b
> +#define GC0308_KWIN_THD 0x10c
> +#define GC0308_LIGHT_GAIN_RANGE 0x10d
> +#define GC0308_SMALL_WIN_WIDTH_STEP 0x10e
> +#define GC0308_SMALL_WIN_HEIGHT_STEP 0x10f
> +#define GC0308_AWB_YELLOW_TH 0x110
> +#define GC0308_AWB_MODE 0x111
> +#define GC0308_AWB_ADJUST_SPEED 0x112
> +#define GC0308_AWB_EVERY_N 0x113
> +#define GC0308_R_AVG_USE 0x1d0
> +#define GC0308_G_AVG_USE 0x1d1
> +#define GC0308_B_AVG_USE 0x1d2
> +
> +#define GC0308_FRAME_RATE 29
> +
> +enum gc0308_exp_val {
> + GC0308_EXP_M4 = 0,
> + GC0308_EXP_M3,
> + GC0308_EXP_M2,
> + GC0308_EXP_M1,
> + GC0308_EXP_0,
> + GC0308_EXP_P1,
> + GC0308_EXP_P2,
> + GC0308_EXP_P3,
> + GC0308_EXP_P4,
> +};
> +
> +static const s64 gc0308_exposure_menu[] = {
> + -4, -3, -2, -1, 0, 1, 2, 3, 4
> +};
> +
> +struct gc0308_exposure {
> + u8 luma_offset;
> + u8 aec_target_y;
> +};
> +
> +#define GC0308_EXPOSURE(luma_offset_reg, aec_target_y_reg) \
> + { .luma_offset = luma_offset_reg, .aec_target_y = aec_target_y_reg }
> +
> +static const struct gc0308_exposure gc0308_exposure_values[] = {
> + [GC0308_EXP_M4] = GC0308_EXPOSURE(0xc0, 0x30),
> + [GC0308_EXP_M3] = GC0308_EXPOSURE(0xd0, 0x38),
> + [GC0308_EXP_M2] = GC0308_EXPOSURE(0xe0, 0x40),
> + [GC0308_EXP_M1] = GC0308_EXPOSURE(0xf0, 0x48),
> + [GC0308_EXP_0] = GC0308_EXPOSURE(0x08, 0x50),
> + [GC0308_EXP_P1] = GC0308_EXPOSURE(0x10, 0x5c),
> + [GC0308_EXP_P2] = GC0308_EXPOSURE(0x20, 0x60),
> + [GC0308_EXP_P3] = GC0308_EXPOSURE(0x30, 0x68),
> + [GC0308_EXP_P4] = GC0308_EXPOSURE(0x40, 0x70),
> +};
> +
> +struct gc0308_awb_gains {
> + u8 r;
> + u8 g;
> + u8 b;
> +};
> +
> +#define GC0308_AWB_GAINS(red, green, blue) \
> + { .r = red, .g = green, .b = blue }
> +
> +static const struct gc0308_awb_gains gc0308_awb_gains[] = {
> + [V4L2_WHITE_BALANCE_AUTO] = GC0308_AWB_GAINS(0x56, 0x40, 0x4a),
> + [V4L2_WHITE_BALANCE_CLOUDY] = GC0308_AWB_GAINS(0x8c, 0x50, 0x40),
> + [V4L2_WHITE_BALANCE_DAYLIGHT] = GC0308_AWB_GAINS(0x74, 0x52, 0x40),
> + [V4L2_WHITE_BALANCE_INCANDESCENT] = GC0308_AWB_GAINS(0x48, 0x40, 0x5c),
> + [V4L2_WHITE_BALANCE_FLUORESCENT] = GC0308_AWB_GAINS(0x40, 0x42, 0x50),
> +};
> +
> +struct gc0308_format {
> + u32 code;
> + u8 regval;
> +};
> +
> +#define GC0308_FORMAT(v4l2_code, gc0308_regval) \
> + { .code = v4l2_code, .regval = gc0308_regval }
> +
> +static const struct gc0308_format gc0308_formats[] = {
> + GC0308_FORMAT(MEDIA_BUS_FMT_UYVY8_2X8, 0x00),
> + GC0308_FORMAT(MEDIA_BUS_FMT_VYUY8_2X8, 0x01),
> + GC0308_FORMAT(MEDIA_BUS_FMT_YUYV8_2X8, 0x02),
> + GC0308_FORMAT(MEDIA_BUS_FMT_YVYU8_2X8, 0x03),
> + GC0308_FORMAT(MEDIA_BUS_FMT_RGB565_2X8_BE, 0x06),
> + GC0308_FORMAT(MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, 0x07),
> + GC0308_FORMAT(MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE, 0x09),
> +};
> +
> +struct gc0308_frame_size {
> + u8 subsample;
> + u32 width;
> + u32 height;
> +};
> +
> +#define GC0308_FRAME_SIZE(s, w, h) \
> + { .subsample = s, .width = w, .height = h }
> +
> +static const struct gc0308_frame_size gc0308_frame_sizes[] = {
> + GC0308_FRAME_SIZE(0x11, 640, 480),
> + GC0308_FRAME_SIZE(0x22, 320, 240),
> + GC0308_FRAME_SIZE(0x44, 160, 120),
> +};
> +
> +struct gc0308 {
> + struct v4l2_subdev sd;
> + struct v4l2_ctrl_handler hdl;
> + struct media_pad pad;
> + struct v4l2_mbus_framefmt format;
You're using subdev active state in this driver (\o/), so you don't need to
store this information in the driver structure. You always get access
to a state, either as a pad operation argument or by getting and
locking it directly at s_stream time. You can access the format from
the state at any time with v4l2_subdev_get_pad_format().
Also, you need the init_cfg operation to be implemented if you're
using the subdev state.
> + struct device *dev;
> + struct clk *clk;
> + struct regmap *regmap;
> + struct regulator *vdd;
> + struct gpio_desc *pwdn_gpio;
> + struct gpio_desc *reset_gpio;
> + unsigned int mbus_config;
> + struct v4l2_fract frame_interval;
> +};
> +
> +static inline struct gc0308 *to_gc0308(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct gc0308, sd);
> +}
> +
> +static const struct regmap_range_cfg gc0308_ranges[] = {
> + {
> + .range_min = 0x0000,
> + .range_max = 0x01ff,
> + .selector_reg = 0xfe,
> + .selector_mask = 0x01,
> + .selector_shift = 0x00,
> + .window_start = 0x00,
> + .window_len = 0x100,
> + },
> +};
> +
> +static const struct regmap_config gc0308_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x1ff,
> + .ranges = gc0308_ranges,
> + .num_ranges = ARRAY_SIZE(gc0308_ranges),
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static const struct reg_sequence sensor_default_regs[] = {
> + REG_SEQ0(GC0308_VB_HB, 0x00),
> + REG_SEQ0(GC0308_HBLANK, 0x40),
> + REG_SEQ0(GC0308_VBLANK, 0x20),
> + REG_SEQ0(GC0308_EXPH, 0x02),
> + REG_SEQ0(GC0308_EXPL, 0x58),
> + REG_SEQ0(GC0308_AWB_R_GAIN, 0x56),
> + REG_SEQ0(GC0308_AWB_G_GAIN, 0x40),
> + REG_SEQ0(GC0308_AWB_B_GAIN, 0x4a),
> + REG_SEQ0(GC0308_ANTI_FLICKER_STEP_H, 0x00),
> + REG_SEQ0(GC0308_ANTI_FLICKER_STEP_L, 0x78),
> + REG_SEQ0(GC0308_EXP_LVL_1H, 0x02),
> + REG_SEQ0(GC0308_EXP_LVL_1L, 0x58),
> + REG_SEQ0(GC0308_EXP_LVL_2H, 0x02),
> + REG_SEQ0(GC0308_EXP_LVL_2L, 0x58),
> + REG_SEQ0(GC0308_EXP_LVL_3H, 0x02),
> + REG_SEQ0(GC0308_EXP_LVL_3L, 0x58),
> + REG_SEQ0(GC0308_EXP_LVL_4H, 0x0e),
> + REG_SEQ0(GC0308_EXP_LVL_4L, 0xa6),
> + REG_SEQ0(GC0308_MAX_EXP_LVL, 0x20),
> + REG_SEQ0(GC0308_ROW_STARTH, 0x00),
> + REG_SEQ0(GC0308_ROW_STARTL, 0x00),
> + REG_SEQ0(GC0308_COL_STARTH, 0x00),
> + REG_SEQ0(GC0308_COL_STARTL, 0x00),
> + REG_SEQ0(GC0308_WIN_HEIGHTH, 0x01), /* 0x1e8 = 488 => VT=480 */
> + REG_SEQ0(GC0308_WIN_HEIGHTL, 0xe8),
> + REG_SEQ0(GC0308_WIN_WIDTHH, 0x02), /* 0x288 = 648 => VH=640 */
> + REG_SEQ0(GC0308_WIN_WIDTHL, 0x88),
> + REG_SEQ0(GC0308_VS_ST, 0x02), /* Start Time (in rows) */
> + REG_SEQ0(GC0308_VS_ET, 0x02), /* End Time (in rows) */
> + REG_SEQ0(GC0308_RSH_WIDTH, 0x22),
> + REG_SEQ0(GC0308_TSP_WIDTH, 0x0d),
> + REG_SEQ0(GC0308_SH_DELAY, 0x50), /* sample hold delay post row finish */
> + REG_SEQ0(GC0308_ROW_TAIL_WIDTH, 0x0f),
> + REG_SEQ0(GC0308_CISCTL_MODE1, 0x10),
> + REG_SEQ0(GC0308_CISCTL_MODE2, 0x0a),
> + REG_SEQ0(GC0308_CISCTL_MODE3, 0x05),
> + REG_SEQ0(GC0308_CISCTL_MODE4, 0x01),
> + REG_SEQ0(0x018, 0x44), /* undocumented */
> + REG_SEQ0(0x019, 0x44), /* undocumented */
> + REG_SEQ0(GC0308_ANALOG_MODE1, 0x2a),
> + REG_SEQ0(GC0308_ANALOG_MODE2, 0x00),
> + REG_SEQ0(GC0308_HRST_RSG_V18, 0x49),
> + REG_SEQ0(GC0308_VREF_V25, 0x9a),
> + REG_SEQ0(GC0308_ADC_R, 0x61),
> + REG_SEQ0(GC0308_PAD_DRV, 0x01), /* drv strength: pclk=4mA */
> + REG_SEQ0(GC0308_BLOCK_EN1, 0x7f),
> + REG_SEQ0(GC0308_BLOCK_EN2, 0xfa),
> + REG_SEQ0(GC0308_AAAA_EN, 0x57),
> + REG_SEQ0(GC0308_OUT_FORMAT, 0xa2), /* YCbYCr */
> + REG_SEQ0(GC0308_OUT_EN, 0x0f),
> + REG_SEQ0(GC0308_SYNC_MODE, 0x03),
> + REG_SEQ0(GC0308_CLK_DIV_MODE, 0x00),
> + REG_SEQ0(GC0308_DEBUG_MODE1, 0x0a),
> + REG_SEQ0(GC0308_DEBUG_MODE2, 0x00),
> + REG_SEQ0(GC0308_DEBUG_MODE3, 0x01),
> + REG_SEQ0(GC0308_BLK_MODE, 0xf7),
> + REG_SEQ0(GC0308_BLK_LIMIT_VAL, 0x50),
> + REG_SEQ0(GC0308_GLOBAL_OFF, 0x00),
> + REG_SEQ0(GC0308_CURRENT_R_OFF, 0x28),
> + REG_SEQ0(GC0308_CURRENT_G_OFF, 0x2a),
> + REG_SEQ0(GC0308_CURRENT_B_OFF, 0x28),
> + REG_SEQ0(GC0308_EXP_RATE_DARKC, 0x04),
> + REG_SEQ0(GC0308_OFF_SUBMODE, 0x20),
> + REG_SEQ0(GC0308_DARKC_SUBMODE, 0x20),
> + REG_SEQ0(GC0308_MANUAL_G1_OFF, 0x00),
> + REG_SEQ0(GC0308_MANUAL_R1_OFF, 0x00),
> + REG_SEQ0(GC0308_MANUAL_B2_OFF, 0x00),
> + REG_SEQ0(GC0308_MANUAL_G2_OFF, 0x00),
> + REG_SEQ0(GC0308_GLOBAL_GAIN, 0x14),
> + REG_SEQ0(GC0308_AUTO_POSTGAIN, 0x41),
> + REG_SEQ0(GC0308_CHANNEL_GAIN_G1, 0x80),
> + REG_SEQ0(GC0308_CHANNEL_GAIN_R, 0x80),
> + REG_SEQ0(GC0308_CHANNEL_GAIN_B, 0x80),
> + REG_SEQ0(GC0308_CHANNEL_GAIN_G2, 0x80),
> + REG_SEQ0(GC0308_LSC_RED_B2, 0x20),
> + REG_SEQ0(GC0308_LSC_GREEN_B2, 0x20),
> + REG_SEQ0(GC0308_LSC_BLUE_B2, 0x20),
> + REG_SEQ0(GC0308_LSC_RED_B4, 0x14),
> + REG_SEQ0(GC0308_LSC_GREEN_B4, 0x10),
> + REG_SEQ0(GC0308_LSC_BLUE_B4, 0x14),
> + REG_SEQ0(GC0308_LSC_ROW_CENTER, 0x3c),
> + REG_SEQ0(GC0308_LSC_COL_CENTER, 0x50),
> + REG_SEQ0(GC0308_LSC_DEC_LVL1, 0x12),
> + REG_SEQ0(GC0308_LSC_DEC_LVL2, 0x1a),
> + REG_SEQ0(GC0308_LSC_DEC_LVL3, 0x24),
> + REG_SEQ0(GC0308_DN_MODE_EN, 0x07),
> + REG_SEQ0(GC0308_DN_MODE_RATIO, 0x15),
> + REG_SEQ0(GC0308_DN_BILAT_B_BASE, 0x08),
> + REG_SEQ0(GC0308_DN_BILAT_N_BASE, 0x03),
> + REG_SEQ0(GC0308_DD_DARK_BRIGHT_TH, 0xe8),
> + REG_SEQ0(GC0308_DD_FLAT_TH, 0x86),
> + REG_SEQ0(GC0308_DD_LIMIT, 0x82),
> + REG_SEQ0(GC0308_ASDE_GAIN_TRESH, 0x18),
> + REG_SEQ0(GC0308_ASDE_GAIN_MODE, 0x0f),
> + REG_SEQ0(GC0308_ASDE_DN_SLOPE, 0x00),
> + REG_SEQ0(GC0308_ASDE_DD_BRIGHT, 0x5f),
> + REG_SEQ0(GC0308_ASDE_DD_LIMIT, 0x8f),
> + REG_SEQ0(GC0308_ASDE_AUTO_EE1, 0x55),
> + REG_SEQ0(GC0308_ASDE_AUTO_EE2, 0x38),
> + REG_SEQ0(GC0308_ASDE_AUTO_SAT_DEC_SLOPE, 0x15),
> + REG_SEQ0(GC0308_ASDE_AUTO_SAT_LOW_LIMIT, 0x33),
> + REG_SEQ0(GC0308_EEINTP_MODE_1, 0xdc),
> + REG_SEQ0(GC0308_EEINTP_MODE_2, 0x00),
> + REG_SEQ0(GC0308_DIRECTION_TH1, 0x02),
> + REG_SEQ0(GC0308_DIRECTION_TH2, 0x3f),
> + REG_SEQ0(GC0308_DIFF_HV_TI_TH, 0x02),
> + REG_SEQ0(GC0308_EDGE12_EFFECT, 0x38),
> + REG_SEQ0(GC0308_EDGE_POS_RATIO, 0x88),
> + REG_SEQ0(GC0308_EDGE1_MINMAX, 0x81),
> + REG_SEQ0(GC0308_EDGE2_MINMAX, 0x81),
> + REG_SEQ0(GC0308_EDGE12_TH, 0x22),
> + REG_SEQ0(GC0308_EDGE_MAX, 0xff),
> + REG_SEQ0(GC0308_CC_MATRIX_C11, 0x48),
> + REG_SEQ0(GC0308_CC_MATRIX_C12, 0x02),
> + REG_SEQ0(GC0308_CC_MATRIX_C13, 0x07),
> + REG_SEQ0(GC0308_CC_MATRIX_C21, 0xe0),
> + REG_SEQ0(GC0308_CC_MATRIX_C22, 0x40),
> + REG_SEQ0(GC0308_CC_MATRIX_C23, 0xf0),
> + REG_SEQ0(GC0308_SATURATION_CB, 0x40),
> + REG_SEQ0(GC0308_SATURATION_CR, 0x40),
> + REG_SEQ0(GC0308_LUMA_CONTRAST, 0x40),
> + REG_SEQ0(GC0308_SKIN_CB_CENTER, 0xe0),
> + REG_SEQ0(GC0308_EDGE_DEC_SA, 0x38),
> + REG_SEQ0(GC0308_AUTO_GRAY_MODE, 0x36),
> + REG_SEQ0(GC0308_AEC_MODE1, 0xcb),
> + REG_SEQ0(GC0308_AEC_MODE2, 0x10),
> + REG_SEQ0(GC0308_AEC_MODE3, 0x90),
> + REG_SEQ0(GC0308_AEC_TARGET_Y, 0x48),
> + REG_SEQ0(GC0308_AEC_HIGH_LOW_RANGE, 0xf2),
> + REG_SEQ0(GC0308_AEC_IGNORE, 0x16),
> + REG_SEQ0(GC0308_AEC_SLOW_MARGIN, 0x92),
> + REG_SEQ0(GC0308_AEC_FAST_MARGIN, 0xa5),
> + REG_SEQ0(GC0308_AEC_I_FRAMES, 0x23),
> + REG_SEQ0(GC0308_AEC_R_OFFSET, 0x00),
> + REG_SEQ0(GC0308_AEC_GB_OFFSET, 0x00),
> + REG_SEQ0(GC0308_AEC_I_STOP_L_MARGIN, 0x09),
> + REG_SEQ0(GC0308_EXP_MIN_L, 0x04),
> + REG_SEQ0(GC0308_MAX_POST_DF_GAIN, 0xa0),
> + REG_SEQ0(GC0308_MAX_PRE_DG_GAIN, 0x40),
> + REG_SEQ0(GC0308_ABB_MODE, 0x03),
> + REG_SEQ0(GC0308_GAMMA_OUT0, 0x10),
> + REG_SEQ0(GC0308_GAMMA_OUT1, 0x20),
> + REG_SEQ0(GC0308_GAMMA_OUT2, 0x38),
> + REG_SEQ0(GC0308_GAMMA_OUT3, 0x4e),
> + REG_SEQ0(GC0308_GAMMA_OUT4, 0x63),
> + REG_SEQ0(GC0308_GAMMA_OUT5, 0x76),
> + REG_SEQ0(GC0308_GAMMA_OUT6, 0x87),
> + REG_SEQ0(GC0308_GAMMA_OUT7, 0xa2),
> + REG_SEQ0(GC0308_GAMMA_OUT8, 0xb8),
> + REG_SEQ0(GC0308_GAMMA_OUT9, 0xca),
> + REG_SEQ0(GC0308_GAMMA_OUT10, 0xd8),
> + REG_SEQ0(GC0308_GAMMA_OUT11, 0xe3),
> + REG_SEQ0(GC0308_GAMMA_OUT12, 0xeb),
> + REG_SEQ0(GC0308_GAMMA_OUT13, 0xf0),
> + REG_SEQ0(GC0308_GAMMA_OUT14, 0xf8),
> + REG_SEQ0(GC0308_GAMMA_OUT15, 0xfd),
> + REG_SEQ0(GC0308_GAMMA_OUT16, 0xff),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT0, 0x00),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT1, 0x10),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT2, 0x1c),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT3, 0x30),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT4, 0x43),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT5, 0x54),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT6, 0x65),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT7, 0x75),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT8, 0x93),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT9, 0xb0),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT10, 0xcb),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT11, 0xe6),
> + REG_SEQ0(GC0308_Y_GAMMA_OUT12, 0xff),
> + REG_SEQ0(GC0308_ABS_RANGE_COMP, 0x02),
> + REG_SEQ0(GC0308_ABS_STOP_MARGIN, 0x01),
> + REG_SEQ0(GC0308_Y_S_COMP, 0x02),
> + REG_SEQ0(GC0308_Y_STRETCH_LIMIT, 0x30),
> + REG_SEQ0(GC0308_BIG_WIN_X0, 0x12),
> + REG_SEQ0(GC0308_BIG_WIN_Y0, 0x0a),
> + REG_SEQ0(GC0308_BIG_WIN_X1, 0x9f),
> + REG_SEQ0(GC0308_BIG_WIN_Y1, 0x78),
> + REG_SEQ0(GC0308_AWB_RGB_HIGH_LOW, 0xf5),
> + REG_SEQ0(GC0308_AWB_Y_TO_C_DIFF2, 0x20),
> + REG_SEQ0(GC0308_AWB_C_MAX, 0x10),
> + REG_SEQ0(GC0308_AWB_C_INTER, 0x08),
> + REG_SEQ0(GC0308_AWB_C_INTER2, 0x20),
> + REG_SEQ0(GC0308_AWB_C_MAX_BIG, 0x0a),
> + REG_SEQ0(GC0308_AWB_NUMBER_LIMIT, 0xa0),
> + REG_SEQ0(GC0308_KWIN_RATIO, 0x60),
> + REG_SEQ0(GC0308_KWIN_THD, 0x08),
> + REG_SEQ0(GC0308_SMALL_WIN_WIDTH_STEP, 0x44),
> + REG_SEQ0(GC0308_SMALL_WIN_HEIGHT_STEP, 0x32),
> + REG_SEQ0(GC0308_AWB_YELLOW_TH, 0x41),
> + REG_SEQ0(GC0308_AWB_MODE, 0x37),
> + REG_SEQ0(GC0308_AWB_ADJUST_SPEED, 0x22),
> + REG_SEQ0(GC0308_AWB_EVERY_N, 0x19),
> + REG_SEQ0(0x114, 0x44), /* AWB set1 */
> + REG_SEQ0(0x115, 0x44), /* AWB set1 */
> + REG_SEQ0(0x116, 0xc2), /* AWB set1 */
> + REG_SEQ0(0x117, 0xa8), /* AWB set1 */
> + REG_SEQ0(0x118, 0x18), /* AWB set1 */
> + REG_SEQ0(0x119, 0x50), /* AWB set1 */
> + REG_SEQ0(0x11a, 0xd8), /* AWB set1 */
> + REG_SEQ0(0x11b, 0xf5), /* AWB set1 */
> + REG_SEQ0(0x170, 0x40), /* AWB set2 */
> + REG_SEQ0(0x171, 0x58), /* AWB set2 */
> + REG_SEQ0(0x172, 0x30), /* AWB set2 */
> + REG_SEQ0(0x173, 0x48), /* AWB set2 */
> + REG_SEQ0(0x174, 0x20), /* AWB set2 */
> + REG_SEQ0(0x175, 0x60), /* AWB set2 */
> + REG_SEQ0(0x177, 0x20), /* AWB set2 */
> + REG_SEQ0(0x178, 0x32), /* AWB set2 */
> + REG_SEQ0(0x130, 0x03), /* undocumented */
> + REG_SEQ0(0x131, 0x40), /* undocumented */
> + REG_SEQ0(0x132, 0x10), /* undocumented */
> + REG_SEQ0(0x133, 0xe0), /* undocumented */
> + REG_SEQ0(0x134, 0xe0), /* undocumented */
> + REG_SEQ0(0x135, 0x00), /* undocumented */
> + REG_SEQ0(0x136, 0x80), /* undocumented */
> + REG_SEQ0(0x137, 0x00), /* undocumented */
> + REG_SEQ0(0x138, 0x04), /* undocumented */
> + REG_SEQ0(0x139, 0x09), /* undocumented */
> + REG_SEQ0(0x13a, 0x12), /* undocumented */
> + REG_SEQ0(0x13b, 0x1c), /* undocumented */
> + REG_SEQ0(0x13c, 0x28), /* undocumented */
> + REG_SEQ0(0x13d, 0x31), /* undocumented */
> + REG_SEQ0(0x13e, 0x44), /* undocumented */
> + REG_SEQ0(0x13f, 0x57), /* undocumented */
> + REG_SEQ0(0x140, 0x6c), /* undocumented */
> + REG_SEQ0(0x141, 0x81), /* undocumented */
> + REG_SEQ0(0x142, 0x94), /* undocumented */
> + REG_SEQ0(0x143, 0xa7), /* undocumented */
> + REG_SEQ0(0x144, 0xb8), /* undocumented */
> + REG_SEQ0(0x145, 0xd6), /* undocumented */
> + REG_SEQ0(0x146, 0xee), /* undocumented */
> + REG_SEQ0(0x147, 0x0d), /* undocumented */
> + REG_SEQ0(0x162, 0xf7), /* undocumented */
> + REG_SEQ0(0x163, 0x68), /* undocumented */
> + REG_SEQ0(0x164, 0xd3), /* undocumented */
> + REG_SEQ0(0x165, 0xd3), /* undocumented */
> + REG_SEQ0(0x166, 0x60), /* undocumented */
> +};
> +
> +struct gc0308_colormode {
> + u8 special_effect;
> + u8 dbg_mode1;
> + u8 block_en1;
> + u8 aec_mode3;
> + u8 eeintp_mode_2;
> + u8 edge12_effect;
> + u8 luma_contrast;
> + u8 contrast_center;
> + u8 fixed_cb;
> + u8 fixed_cr;
> +};
> +
> +#define GC0308_COLOR_FX(reg_special_effect, reg_dbg_mode1, reg_block_en1, \
> + reg_aec_mode3, reg_eeintp_mode_2, reg_edge12_effect, \
> + reg_luma_contrast, reg_contrast_center, \
> + reg_fixed_cb, reg_fixed_cr) \
> + { \
> + .special_effect = reg_special_effect, \
> + .dbg_mode1 = reg_dbg_mode1, \
> + .block_en1 = reg_block_en1, \
> + .aec_mode3 = reg_aec_mode3, \
> + .eeintp_mode_2 = reg_eeintp_mode_2, \
> + .edge12_effect = reg_edge12_effect, \
> + .luma_contrast = reg_luma_contrast, \
> + .contrast_center = reg_contrast_center, \
> + .fixed_cb = reg_fixed_cb, \
> + .fixed_cr = reg_fixed_cr, \
> + }
> +
> +static const struct gc0308_colormode gc0308_colormodes[] = {
> + [V4L2_COLORFX_NONE] =
> + GC0308_COLOR_FX(0x00, 0x0a, 0xff, 0x90, 0x00,
> + 0x54, 0x3c, 0x80, 0x00, 0x00),
> + [V4L2_COLORFX_BW] =
> + GC0308_COLOR_FX(0x02, 0x0a, 0xff, 0x90, 0x00,
> + 0x54, 0x40, 0x80, 0x00, 0x00),
> + [V4L2_COLORFX_SEPIA] =
> + GC0308_COLOR_FX(0x02, 0x0a, 0xff, 0x90, 0x00,
> + 0x38, 0x40, 0x80, 0xd0, 0x28),
> + [V4L2_COLORFX_NEGATIVE] =
> + GC0308_COLOR_FX(0x01, 0x0a, 0xff, 0x90, 0x00,
> + 0x38, 0x40, 0x80, 0x00, 0x00),
> + [V4L2_COLORFX_EMBOSS] =
> + GC0308_COLOR_FX(0x02, 0x0a, 0xbf, 0x10, 0x01,
> + 0x38, 0x40, 0x80, 0x00, 0x00),
> + [V4L2_COLORFX_SKETCH] =
> + GC0308_COLOR_FX(0x02, 0x0a, 0xff, 0x10, 0x80,
> + 0x38, 0x80, 0x90, 0x00, 0x00),
> + [V4L2_COLORFX_SKY_BLUE] =
> + GC0308_COLOR_FX(0x02, 0x0a, 0xff, 0x90, 0x00,
> + 0x38, 0x40, 0x80, 0x50, 0xe0),
> + [V4L2_COLORFX_GRASS_GREEN] =
> + GC0308_COLOR_FX(0x02, 0x0a, 0xff, 0x90, 0x01,
> + 0x38, 0x40, 0x80, 0xc0, 0xc0),
> + [V4L2_COLORFX_SKIN_WHITEN] =
> + GC0308_COLOR_FX(0x02, 0x0a, 0xbf, 0x10, 0x01,
> + 0x38, 0x60, 0x40, 0x00, 0x00),
> +};
> +
> +static const struct reg_sequence sensor_banding_50hz[] = {
> + REG_SEQ0(GC0308_ANTI_FLICKER_STEP_L, 0x78),
> + REG_SEQ0(GC0308_EXP_LVL_1H, 0x02),
> + REG_SEQ0(GC0308_EXP_LVL_1L, 0x58),
> + REG_SEQ0(GC0308_EXP_LVL_2H, 0x03),
> + REG_SEQ0(GC0308_EXP_LVL_2L, 0x48),
> + REG_SEQ0(GC0308_EXP_LVL_3H, 0x04),
> + REG_SEQ0(GC0308_EXP_LVL_3L, 0xb0),
> + REG_SEQ0(GC0308_EXP_LVL_4H, 0x05),
> + REG_SEQ0(GC0308_EXP_LVL_4L, 0xa0),
> +};
> +
> +static const struct reg_sequence sensor_banding_60hz[] = {
> + REG_SEQ0(GC0308_ANTI_FLICKER_STEP_L, 0x64),
> + REG_SEQ0(GC0308_EXP_LVL_1H, 0x02),
> + REG_SEQ0(GC0308_EXP_LVL_1L, 0x58),
> + REG_SEQ0(GC0308_EXP_LVL_2H, 0x03),
> + REG_SEQ0(GC0308_EXP_LVL_2L, 0x84),
> + REG_SEQ0(GC0308_EXP_LVL_3H, 0x04),
> + REG_SEQ0(GC0308_EXP_LVL_3L, 0xb0),
> + REG_SEQ0(GC0308_EXP_LVL_4H, 0x05),
> + REG_SEQ0(GC0308_EXP_LVL_4L, 0xdc),
> +};
> +
> +static int gc0308_power_on(struct device *dev)
> +{
> + struct gc0308 *gc0308 = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = regulator_enable(gc0308->vdd);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(gc0308->clk);
> + if (ret)
> + goto clk_fail;
> +
> + gpiod_set_value_cansleep(gc0308->pwdn_gpio, 0);
> + usleep_range(10000, 20000);
> +
> + gpiod_set_value_cansleep(gc0308->reset_gpio, 1);
> + msleep(100);
> + gpiod_set_value_cansleep(gc0308->reset_gpio, 0);
> + msleep(100);
Wow! that's long :)
> +
> + return 0;
> +
> +clk_fail:
> + regulator_disable(gc0308->vdd);
> + return ret;
> +}
> +
> +static int gc0308_power_off(struct device *dev)
> +{
> + struct gc0308 *gc0308 = dev_get_drvdata(dev);
> +
> + gpiod_set_value_cansleep(gc0308->pwdn_gpio, 1);
> + clk_disable_unprepare(gc0308->clk);
> + regulator_disable(gc0308->vdd);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> +static int gc0308_g_register(struct v4l2_subdev *sd,
> + struct v4l2_dbg_register *reg)
> +{
> + struct gc0308 *gc0308 = to_gc0308(sd);
> + int ret, val;
> +
> + ret = regmap_read(gc0308->regmap, reg->reg, &val);
> + if (ret)
> + return ret;
> +
> + reg->val = val;
> + return 0;
> +}
> +
> +static int gc0308_s_register(struct v4l2_subdev *sd,
> + const struct v4l2_dbg_register *reg)
> +{
> + struct gc0308 *gc0308 = to_gc0308(sd);
> +
> + return regmap_write(gc0308->regmap, reg->reg, reg->val);
> +}
> +#endif
> +
> +static int gc0308_s_format(struct gc0308 *gc0308)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(gc0308_formats); i++) {
> + if (gc0308->format.code != gc0308_formats[i].code)
> + continue;
> + return regmap_update_bits(gc0308->regmap,
> + GC0308_OUT_FORMAT, GENMASK(4, 0),
> + gc0308_formats[i].regval);
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int gc0308_set_exposure(struct gc0308 *gc0308, enum gc0308_exp_val exp)
> +{
> + const struct gc0308_exposure *regs = &gc0308_exposure_values[exp];
> + struct reg_sequence exposure_reg_seq[] = {
> + REG_SEQ0(GC0308_LUMA_OFFSET, regs->luma_offset),
> + REG_SEQ0(GC0308_AEC_TARGET_Y, regs->aec_target_y),
> + };
> +
> + dev_err(gc0308->dev, "exposure: %i\n", exp);
maybe dev_dbg ?
> +
> + return regmap_multi_reg_write(gc0308->regmap,
> + exposure_reg_seq,
> + ARRAY_SIZE(exposure_reg_seq));
> +}
> +
> +static int gc0308_set_awb_mode(struct gc0308 *gc0308,
> + enum v4l2_auto_n_preset_white_balance val)
> +{
> + const struct gc0308_awb_gains *regs = &gc0308_awb_gains[val];
> + struct reg_sequence awb_reg_seq[] = {
> + REG_SEQ0(GC0308_AWB_R_GAIN, regs->r),
> + REG_SEQ0(GC0308_AWB_G_GAIN, regs->g),
> + REG_SEQ0(GC0308_AWB_B_GAIN, regs->b),
> + };
> + int ret;
> +
> + ret = regmap_update_bits(gc0308->regmap, GC0308_AAAA_EN,
> + BIT(1), val == V4L2_WHITE_BALANCE_AUTO);
> + if (ret)
> + return ret;
> +
> + return regmap_multi_reg_write(gc0308->regmap,
> + awb_reg_seq,
> + ARRAY_SIZE(awb_reg_seq));
Can you save one line here ?
> +}
> +
> +static int gc0308_set_colormode(struct gc0308 *gc0308, enum v4l2_colorfx mode)
> +{
> + const struct gc0308_colormode *regs = &gc0308_colormodes[mode];
> + struct reg_sequence colormode_reg_seq[] = {
> + REG_SEQ0(GC0308_SPECIAL_EFFECT, regs->special_effect),
> + REG_SEQ0(GC0308_DEBUG_MODE1, regs->dbg_mode1),
> + REG_SEQ0(GC0308_BLOCK_EN1, regs->block_en1),
> + REG_SEQ0(GC0308_AEC_MODE3, regs->aec_mode3),
> + REG_SEQ0(GC0308_EEINTP_MODE_2, regs->eeintp_mode_2),
> + REG_SEQ0(GC0308_EDGE12_EFFECT, regs->edge12_effect),
> + REG_SEQ0(GC0308_LUMA_CONTRAST, regs->luma_contrast),
> + REG_SEQ0(GC0308_CONTRAST_CENTER, regs->contrast_center),
> + REG_SEQ0(GC0308_FIXED_CB, regs->fixed_cb),
> + REG_SEQ0(GC0308_FIXED_CR, regs->fixed_cr),
> + };
> +
> + return regmap_multi_reg_write(gc0308->regmap,
> + colormode_reg_seq,
> + ARRAY_SIZE(colormode_reg_seq));
> +}
> +
> +static int gc0308_set_power_line_freq(struct gc0308 *gc0308, int frequency)
> +{
> + const struct reg_sequence *regs;
> + int num_regs;
> +
> + switch (frequency) {
> + case V4L2_CID_POWER_LINE_FREQUENCY_60HZ:
> + regs = sensor_banding_60hz;
> + num_regs = ARRAY_SIZE(sensor_banding_60hz);
> + break;
> + case V4L2_CID_POWER_LINE_FREQUENCY_50HZ:
> + default:
> + regs = sensor_banding_50hz;
> + num_regs = ARRAY_SIZE(sensor_banding_50hz);
> + break;
> + }
> +
> + return regmap_multi_reg_write(gc0308->regmap, regs, num_regs);
> +}
> +
> +static int _gc0308_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct gc0308 *gc0308 = container_of(ctrl->handler, struct gc0308, hdl);
> + uint8_t flipval = ctrl->val ? 0xff : 0x00;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_VFLIP:
> + return regmap_update_bits(gc0308->regmap, GC0308_CISCTL_MODE1,
> + BIT(1), flipval);
> + case V4L2_CID_HFLIP:
> + return regmap_update_bits(gc0308->regmap, GC0308_CISCTL_MODE1,
> + BIT(0), flipval);
> + case V4L2_CID_AUTO_WHITE_BALANCE:
> + return regmap_update_bits(gc0308->regmap, GC0308_AAAA_EN,
> + BIT(1), flipval);
> + case V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE:
> + return gc0308_set_awb_mode(gc0308, ctrl->val);
> + case V4L2_CID_POWER_LINE_FREQUENCY:
> + return gc0308_set_power_line_freq(gc0308, ctrl->val);
> + case V4L2_CID_COLORFX:
> + return gc0308_set_colormode(gc0308, ctrl->val);
> + case V4L2_CID_TEST_PATTERN:
> + return regmap_update_bits(gc0308->regmap, GC0308_DEBUG_MODE2,
> + GENMASK(1, 0), ctrl->val);
> + case V4L2_CID_AUTO_EXPOSURE_BIAS:
> + return gc0308_set_exposure(gc0308, ctrl->val);
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int gc0308_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct gc0308 *gc0308 = container_of(ctrl->handler, struct gc0308, hdl);
> + int ret;
> +
> + ret = pm_runtime_resume_and_get(gc0308->dev);
Sensor drivers are usually not resumed in the s_ctrl call path, but
usually the current power state is checked and the function returns
early if the device is not powered
if (!pm_runtime_get_if_in_use(&client->dev))
return 0;
Then in the the s_stream() call path, after the sensor has been
resumed, the controls are applied by calling
__v4l2_ctrl_handler_setup()
as you aready do!
> + if (ret < 0)
> + return ret;
> +
> + ret = _gc0308_s_ctrl(ctrl);
> +
> + pm_runtime_put(gc0308->dev);
> +
> + if (ret)
> + dev_err(gc0308->dev, "s_ctrl failed: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops gc0308_ctrl_ops = {
> + .s_ctrl = gc0308_s_ctrl,
> +};
> +
> +static const struct v4l2_subdev_core_ops gc0308_core_ops = {
> + .log_status = v4l2_ctrl_subdev_log_status,
> + .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> + .unsubscribe_event = v4l2_event_subdev_unsubscribe,
> +#ifdef CONFIG_VIDEO_ADV_DEBUG
> + .g_register = gc0308_g_register,
> + .s_register = gc0308_s_register,
> +#endif
> +};
> +
> +static int gc0308_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->index >= ARRAY_SIZE(gc0308_formats))
> + return -EINVAL;
> +
> + code->code = gc0308_formats[code->index].code;
> +
> + return 0;
> +}
> +
> +static int gc0308_enum_frame_size(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + if (fse->index >= ARRAY_SIZE(gc0308_frame_sizes))
> + return -EINVAL;
> +
You should check fse->code is supported, assuming all sizes are
supported for all formats
> + fse->min_width = gc0308_frame_sizes[fse->index].width;
> + fse->max_width = gc0308_frame_sizes[fse->index].width;
> + fse->min_height = gc0308_frame_sizes[fse->index].height;
> + fse->max_height = gc0308_frame_sizes[fse->index].height;
> +
> + return 0;
> +}
> +
> +static void gc0308_update_pad_format(const struct gc0308_frame_size *mode,
> + struct v4l2_mbus_framefmt *fmt, u32 code)
> +{
> + fmt->width = mode->width;
> + fmt->height = mode->height;
> + fmt->code = code;
> + fmt->field = V4L2_FIELD_NONE;
> + fmt->colorspace = V4L2_COLORSPACE_SRGB;
> +}
> +
> +static int gc0308_set_format(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct gc0308 *gc0308 = to_gc0308(sd);
> + const struct gc0308_frame_size *mode;
> + unsigned int i;
> + u32 code = 0;
> +
> + for (i = 0; i < ARRAY_SIZE(gc0308_formats); i++) {
> + if (fmt->format.code == gc0308_formats[i].code) {
> + code = gc0308_formats[i].code;
> + break;
> + }
> + }
> +
> + if (!code) {
> + dev_warn(gc0308->dev, "unsupported format code: %08x\n",
> + fmt->format.code);
> + code = gc0308_formats[2].code;
> + }
> +
> + mode = v4l2_find_nearest_size(gc0308_frame_sizes,
> + ARRAY_SIZE(gc0308_frame_sizes), width,
> + height, fmt->format.width,
> + fmt->format.height);
> +
> + gc0308_update_pad_format(mode, &fmt->format, code);
> + *v4l2_subdev_get_pad_format(sd, sd_state, fmt->pad) = fmt->format;
> +
> + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
> + return 0;
> +
> + gc0308->format.width = fmt->format.width;
> + gc0308->format.height = fmt->format.height;
> + gc0308->format.code = fmt->format.code;
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_pad_ops gc0308_pad_ops = {
> + .enum_mbus_code = gc0308_enum_mbus_code,
> + .enum_frame_size = gc0308_enum_frame_size,
> + .get_fmt = v4l2_subdev_get_fmt,
> + .set_fmt = gc0308_set_format,
> +};
> +
> +static int gc0308_set_resolution(struct gc0308 *gc0308,
> + u8 subsample, u16 w, u16 h)
> +{
> + struct reg_sequence resolution_regs[] = {
> + REG_SEQ0(GC0308_SUBSAMPLE, subsample),
> + REG_SEQ0(GC0308_SUBMODE, 0x03),
> + REG_SEQ0(GC0308_SUB_ROW_N1, 0x00),
> + REG_SEQ0(GC0308_SUB_ROW_N2, 0x00),
> + REG_SEQ0(GC0308_SUB_COL_N1, 0x00),
> + REG_SEQ0(GC0308_SUB_COL_N2, 0x00),
> + REG_SEQ0(GC0308_CROP_WIN_MODE, 0x80),
> + REG_SEQ0(GC0308_CROP_WIN_Y1, 0x00),
> + REG_SEQ0(GC0308_CROP_WIN_X1, 0x00),
> + REG_SEQ0(GC0308_CROP_WIN_HEIGHTH, (h >> 8) & 0xFF),
> + REG_SEQ0(GC0308_CROP_WIN_HEIGHTL, (h >> 0) & 0xFF),
> + REG_SEQ0(GC0308_CROP_WIN_WIDTHH, (w >> 8) & 0xFF),
> + REG_SEQ0(GC0308_CROP_WIN_WIDTHL, (w >> 0) & 0xFF),
> + };
> +
> + return regmap_multi_reg_write(gc0308->regmap, resolution_regs,
> + ARRAY_SIZE(resolution_regs));
> +}
> +
> +static int gc0308_start_stream(struct gc0308 *gc0308)
> +{
> + int ret, sync_mode;
> + u16 width = 0, height = 0;
> + u8 subsample = 0;
> + unsigned int i;
> +
> + ret = pm_runtime_resume_and_get(gc0308->dev);
> + if (ret < 0)
> + return ret;
> +
> + ret = regmap_multi_reg_write(gc0308->regmap, sensor_default_regs,
> + ARRAY_SIZE(sensor_default_regs));
> + if (ret) {
> + dev_err(gc0308->dev, "failed to write default regs\n");
> + goto disable_pm;
> + }
> +
> + ret = gc0308_s_format(gc0308);
> + if (ret) {
> + dev_err(gc0308->dev, "failed to set format\n");
> + goto disable_pm;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(gc0308_frame_sizes); i++) {
> + if (gc0308_frame_sizes[i].width == gc0308->format.width &&
> + gc0308_frame_sizes[i].height == gc0308->format.height) {
> + width = gc0308_frame_sizes[i].width;
> + height = gc0308_frame_sizes[i].height;
> + subsample = gc0308_frame_sizes[i].subsample;
> + }
> + }
> +
> + if (!width || !height) {
> + dev_err(gc0308->dev, "invalid resolution\n");
> + goto disable_pm;
> + }
Can this happen? Since sizes are setup with s_fmt they should be
correct.
> +
> + ret = gc0308_set_resolution(gc0308, subsample, width, height);
> + if (ret) {
> + dev_err(gc0308->dev, "failed to write resolution regs\n");
> + goto disable_pm;
> + }
> +
> + ret = __v4l2_ctrl_handler_setup(&gc0308->hdl);
> + if (ret) {
> + dev_err(gc0308->dev, "failed to setup controls\n");
> + goto disable_pm;
> + }
> +
> + /* HSYNC/VSYNC polarity */
> + sync_mode = 0x3;
> + if (gc0308->mbus_config & V4L2_MBUS_VSYNC_ACTIVE_LOW)
> + sync_mode &= ~BIT(0);
> + if (gc0308->mbus_config & V4L2_MBUS_HSYNC_ACTIVE_LOW)
> + sync_mode &= ~BIT(1);
> + ret = regmap_write(gc0308->regmap, GC0308_SYNC_MODE, sync_mode);
> + if (ret)
> + goto disable_pm;
> +
> + return 0;
> +
> +disable_pm:
> + pm_runtime_put(gc0308->dev);
> + return ret;
> +}
> +
> +static int gc0308_stop_stream(struct gc0308 *gc0308)
> +{
> + pm_runtime_put(gc0308->dev);
> + return 0;
> +}
> +
> +static int gc0308_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct gc0308 *gc0308 = to_gc0308(sd);
> + struct v4l2_subdev_state *sd_state;
> + int ret;
> +
> + sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> +
> + if (enable)
> + ret = gc0308_start_stream(gc0308);
> + else
> + ret = gc0308_stop_stream(gc0308);
> +
> + v4l2_subdev_unlock_state(sd_state);
> + return ret;
> +}
> +
> +static int gc0308_g_frame_interval(struct v4l2_subdev *sd,
> + struct v4l2_subdev_frame_interval *fi)
> +{
> + struct gc0308 *gc0308 = to_gc0308(sd);
> + struct v4l2_subdev_state *sd_state;
> +
> + sd_state = v4l2_subdev_lock_and_get_active_state(sd);
> + fi->interval = gc0308->frame_interval;
> + v4l2_subdev_unlock_state(sd_state);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_video_ops gc0308_video_ops = {
> + .g_frame_interval = gc0308_g_frame_interval,
> + .s_stream = gc0308_s_stream,
> +};
> +
> +static const struct v4l2_subdev_ops gc0308_subdev_ops = {
> + .core = &gc0308_core_ops,
> + .pad = &gc0308_pad_ops,
> + .video = &gc0308_video_ops,
> +};
> +
> +static int gc0308_bus_config(struct gc0308 *gc0308)
> +{
> + struct device *dev = gc0308->dev;
> + struct v4l2_fwnode_endpoint bus_cfg = {
> + .bus_type = V4L2_MBUS_PARALLEL
> + };
> + struct fwnode_handle *ep;
> + int ret;
> +
> + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, 0);
> + if (!ep)
> + return -EINVAL;
> +
> + ret = v4l2_fwnode_endpoint_parse(ep, &bus_cfg);
> + fwnode_handle_put(ep);
> + if (ret)
> + return ret;
> +
> + gc0308->mbus_config = bus_cfg.bus.parallel.flags;
> +
> + return 0;
> +}
> +
> +static const char * const gc0308_test_pattern_menu[] = {
> + "Disabled",
> + "Test Image 1",
> + "Test Image 2",
> +};
> +
> +static int gc0308_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct gc0308 *gc0308;
> + unsigned long clkrate;
> + int ret, regval;
> +
> + gc0308 = devm_kzalloc(dev, sizeof(*gc0308), GFP_KERNEL);
> + if (!gc0308)
> + return -ENOMEM;
> +
> + gc0308->dev = dev;
> + dev_set_drvdata(dev, gc0308);
> +
> + ret = gc0308_bus_config(gc0308);
> + if (ret)
> + return dev_err_probe(dev, ret, "failed to get bus config\n");
> +
> + gc0308->format.width = gc0308_frame_sizes[0].width;
> + gc0308->format.height = gc0308_frame_sizes[0].height;
> + gc0308->format.code = gc0308_formats[2].code;
> + gc0308->frame_interval.numerator = 1;
> + gc0308->frame_interval.denominator = GC0308_FRAME_RATE;
> +
> + gc0308->clk = devm_clk_get_optional(dev, NULL);
> + if (IS_ERR(gc0308->clk))
> + return dev_err_probe(dev, PTR_ERR(gc0308->clk),
> + "could not get clk\n");
> +
> + gc0308->vdd = devm_regulator_get(dev, "vdd28");
> + if (IS_ERR(gc0308->vdd))
> + return dev_err_probe(dev, PTR_ERR(gc0308->vdd),
> + "failed to get vdd28 regulator\n");
> +
> + gc0308->pwdn_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_LOW);
> + if (IS_ERR(gc0308->pwdn_gpio))
> + return dev_err_probe(dev, PTR_ERR(gc0308->pwdn_gpio),
> + "failed to get powerdown gpio\n");
> +
> + gc0308->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(gc0308->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(gc0308->reset_gpio),
> + "failed to get reset gpio\n");
> +
> + gc0308->regmap = devm_regmap_init_i2c(client, &gc0308_regmap_config);
> + if (IS_ERR(gc0308->regmap))
> + return dev_err_probe(dev, PTR_ERR(gc0308->regmap),
> + "failed to init regmap\n");
> +
> + v4l2_i2c_subdev_init(&gc0308->sd, client, &gc0308_subdev_ops);
> + gc0308->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + gc0308->sd.flags |= V4L2_SUBDEV_FL_HAS_EVENTS;
> +
> + v4l2_ctrl_handler_init(&gc0308->hdl, 8);
> + v4l2_ctrl_new_std(&gc0308->hdl, &gc0308_ctrl_ops,
> + V4L2_CID_VFLIP, 0, 1, 1, 0);
> + v4l2_ctrl_new_std(&gc0308->hdl, &gc0308_ctrl_ops,
> + V4L2_CID_HFLIP, 0, 1, 1, 0);
> + v4l2_ctrl_new_std(&gc0308->hdl, &gc0308_ctrl_ops,
> + V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
> + v4l2_ctrl_new_std_menu_items(&gc0308->hdl, &gc0308_ctrl_ops,
> + V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(gc0308_test_pattern_menu) - 1,
> + 0, 0, gc0308_test_pattern_menu);
> + v4l2_ctrl_new_std_menu(&gc0308->hdl, &gc0308_ctrl_ops,
> + V4L2_CID_AUTO_N_PRESET_WHITE_BALANCE,
> + 8, ~0x14e, V4L2_WHITE_BALANCE_AUTO);
> + v4l2_ctrl_new_std_menu(&gc0308->hdl, &gc0308_ctrl_ops,
> + V4L2_CID_COLORFX, 8, 0, V4L2_COLORFX_NONE);
> + v4l2_ctrl_new_std_menu(&gc0308->hdl, &gc0308_ctrl_ops,
> + V4L2_CID_POWER_LINE_FREQUENCY,
> + V4L2_CID_POWER_LINE_FREQUENCY_60HZ,
> + ~0x6, V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
> + v4l2_ctrl_new_int_menu(&gc0308->hdl, &gc0308_ctrl_ops,
> + V4L2_CID_AUTO_EXPOSURE_BIAS,
> + ARRAY_SIZE(gc0308_exposure_menu) - 1,
> + ARRAY_SIZE(gc0308_exposure_menu)/2,
> + gc0308_exposure_menu);
> +
> + gc0308->sd.ctrl_handler = &gc0308->hdl;
> + if (gc0308->hdl.error) {
> + ret = gc0308->hdl.error;
> + return ret;
> + }
> +
> + gc0308->sd.state_lock = gc0308->hdl.lock;
> + gc0308->pad.flags = MEDIA_PAD_FL_SOURCE;
> + gc0308->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> + ret = media_entity_pads_init(&gc0308->sd.entity, 1, &gc0308->pad);
> + if (ret < 0)
> + return ret;
> +
> + ret = v4l2_subdev_init_finalize(&gc0308->sd);
> + if (ret)
> + goto fail_media_entity_cleanup;
> +
> + ret = gc0308_power_on(dev);
> + if (ret)
> + goto fail_subdev_cleanup;
> +
> + if (gc0308->clk) {
> + clkrate = clk_get_rate(gc0308->clk);
> + if (clkrate != 24000000)
> + dev_warn(dev, "unexpected clock rate: %lu\n", clkrate);
Should the driver continue to operate if the frequency is not
supported ?
> + }
> +
> + ret = regmap_read(gc0308->regmap, GC0308_CHIP_ID, ®val);
> + if (ret < 0) {
> + dev_err_probe(dev, ret, "failed to read chip ID\n");
> + goto fail_power_off;
> + }
> +
> + if (regval != 0x9b) {
> + ret = -EINVAL;
> + dev_err_probe(dev, ret, "invalid chip ID (%02x)\n", regval);
> + goto fail_power_off;
> + }
> +
> + ret = v4l2_async_register_subdev(&gc0308->sd);
> + if (ret) {
> + dev_err_probe(dev, ret, "failed to register v4l subdev\n");
> + goto fail_power_off;
> + }
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + pm_runtime_idle(dev);
using autosuspend might be nice. Have a look at the CCS driver as an
example
pm_runtime_set_active(&client->dev);
pm_runtime_get_noresume(&client->dev);
pm_runtime_enable(&client->dev);
rval = v4l2_async_register_subdev_sensor(&sensor->src->sd);
if (rval < 0)
goto out_disable_runtime_pm;
pm_runtime_set_autosuspend_delay(&client->dev, 1000);
pm_runtime_use_autosuspend(&client->dev);
pm_runtime_put_autosuspend(&client->dev);
> +
> + return 0;
> +
> +fail_power_off:
> + gc0308_power_off(dev);
> +fail_subdev_cleanup:
> + v4l2_subdev_cleanup(&gc0308->sd);
> +fail_media_entity_cleanup:
> + media_entity_cleanup(&gc0308->sd.entity);
> + return ret;
> +}
> +
> +static void gc0308_remove(struct i2c_client *client)
> +{
> + struct gc0308 *gc0308 = i2c_get_clientdata(client);
> + struct device *dev = &client->dev;
> +
> + pm_runtime_get_sync(dev);
> +
> + v4l2_async_unregister_subdev(&gc0308->sd);
> + v4l2_ctrl_handler_free(&gc0308->hdl);
> +
> + pm_runtime_disable(dev);
> + pm_runtime_set_suspended(dev);
> + pm_runtime_put_noidle(dev);
> + gc0308_power_off(dev);
> +}
> +
> +static const struct dev_pm_ops gc0308_pm_ops = {
> + SET_RUNTIME_PM_OPS(gc0308_power_off, gc0308_power_on, NULL)
> +};
> +
> +static const struct of_device_id gc0308_of_match[] = {
> + { .compatible = "galaxycore,gc0308" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, gc0308_of_match);
> +
> +static struct i2c_driver gc0308_i2c_driver = {
> + .driver = {
> + .name = "gc0308",
> + .pm = &gc0308_pm_ops,
> + .of_match_table = gc0308_of_match,
> + },
> + .probe = gc0308_probe,
> + .remove = gc0308_remove,
> +};
> +module_i2c_driver(gc0308_i2c_driver);
> +
> +MODULE_DESCRIPTION("GalaxyCore GC0308 Camera Driver");
> +MODULE_AUTHOR("Sebastian Reichel <sre@...nel.org>");
> +MODULE_LICENSE("GPL");
> --
> 2.42.0
>
Powered by blists - more mailing lists