[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231025-pessimist-irritate-927b64fbd2fa-mkl@pengutronix.de>
Date: Wed, 25 Oct 2023 16:33:07 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Tim Harvey <tharvey@...eworks.com>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
kernel@...gutronix.de
Subject: Re: [PATCH v2] arm64: dts: imx8mp: add imx8mp-venice-gw74xx-rpidsi
overlay for display
Hey Tim,
On 19.07.2023 08:29:20, Tim Harvey wrote:
> Add support for the following Raspberry Pi displays:
> - DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch
> - DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch
>
> Both have the following hardware:
> - FocalTech FT5406 10pt touch controller (with no interrupt)
> - Powertip PH800480T013-IDF02 compatible panel
> - Toshiba TC358762 compatible DSI to DBI bridge
> - ATTINY based regulator used for backlight controller and panel enable
>
> Support is added via a device-tree overlay. The touch controller is not
> yet supported as polling mode is needed.
I'm just integrating the 7in Raspberry Pi display for a customer on an
imx8mp. Do you have a (non-mainline) touch driver that works for the
Raspberry Pi display? I might fight some time in this project to work on
it.
regards,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists