Message-Id: <20231025183644.8735-11-jerry.shih@sifive.com>
Date:   Thu, 26 Oct 2023 02:36:42 +0800
From:   Jerry Shih <jerry.shih@...ive.com>
To:     paul.walmsley@...ive.com, palmer@...belt.com,
        aou@...s.berkeley.edu, herbert@...dor.apana.org.au,
        davem@...emloft.net
Cc:     andy.chiu@...ive.com, greentime.hu@...ive.com,
        conor.dooley@...rochip.com, guoren@...nel.org, bjorn@...osinc.com,
        heiko@...ech.de, ebiggers@...nel.org, ardb@...nel.org,
        phoebe.chen@...ive.com, hongrong.hsu@...ive.com,
        linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-crypto@...r.kernel.org
Subject: [PATCH 10/12] RISC-V: crypto: add Zvksed accelerated SM4 implementation

Add SM4 implementation using Zvksed vector crypto extension from OpenSSL
(openssl/openssl#21923).

The perlasm here is different from the original implementation in OpenSSL.
In OpenSSL, SM4 has the separated set_encrypt_key and set_decrypt_key
functions. In kernel, these set_key functions are merged into a single
one in order to skip the redundant key expanding instructions.

Co-developed-by: Christoph Müllner <christoph.muellner@...ll.eu>
Signed-off-by: Christoph Müllner <christoph.muellner@...ll.eu>
Co-developed-by: Heiko Stuebner <heiko.stuebner@...ll.eu>
Signed-off-by: Heiko Stuebner <heiko.stuebner@...ll.eu>
Signed-off-by: Jerry Shih <jerry.shih@...ive.com>
---
 arch/riscv/crypto/Kconfig               |  19 ++
 arch/riscv/crypto/Makefile              |   7 +
 arch/riscv/crypto/sm4-riscv64-glue.c    | 120 +++++++++++
 arch/riscv/crypto/sm4-riscv64-zvksed.pl | 268 ++++++++++++++++++++++++
 4 files changed, 414 insertions(+)
 create mode 100644 arch/riscv/crypto/sm4-riscv64-glue.c
 create mode 100644 arch/riscv/crypto/sm4-riscv64-zvksed.pl

diff --git a/arch/riscv/crypto/Kconfig b/arch/riscv/crypto/Kconfig
index a5a34777d9c3..ff004afa2874 100644
--- a/arch/riscv/crypto/Kconfig
+++ b/arch/riscv/crypto/Kconfig
@@ -75,4 +75,23 @@ config CRYPTO_SHA512_RISCV64
 	  - Zvkb vector crypto extension
 	  - Zvknhb vector crypto extension
 
+config CRYPTO_SM4_RISCV64
+	default y if RISCV_ISA_V
+	tristate "Ciphers: SM4 (ShangMi 4)"
+	depends on 64BIT && RISCV_ISA_V
+	select CRYPTO_ALGAPI
+	select CRYPTO_SM4
+	select CRYPTO_SM4_GENERIC
+	help
+	  SM4 cipher algorithms (OSCCA GB/T 32907-2016,
+	  ISO/IEC 18033-3:2010/Amd 1:2021)
+
+	  SM4 (GBT.32907-2016) is a cryptographic standard issued by the
+	  Organization of State Commercial Administration of China (OSCCA)
+	  as an authorized cryptographic algorithms for the use within China.
+
+	  Architecture: riscv64 using:
+	  - Zvkb vector crypto extension
+	  - Zvksed vector crypto extension
+
 endmenu
diff --git a/arch/riscv/crypto/Makefile b/arch/riscv/crypto/Makefile
index ebb4e861ebdc..ffad095e531f 100644
--- a/arch/riscv/crypto/Makefile
+++ b/arch/riscv/crypto/Makefile
@@ -18,6 +18,9 @@ sha256-riscv64-y := sha256-riscv64-glue.o sha256-riscv64-zvkb-zvknha_or_zvknhb.o
 obj-$(CONFIG_CRYPTO_SHA512_RISCV64) += sha512-riscv64.o
 sha512-riscv64-y := sha512-riscv64-glue.o sha512-riscv64-zvkb-zvknhb.o
 
+obj-$(CONFIG_CRYPTO_SM4_RISCV64) += sm4-riscv64.o
+sm4-riscv64-y := sm4-riscv64-glue.o sm4-riscv64-zvksed.o
+
 quiet_cmd_perlasm = PERLASM $@
       cmd_perlasm = $(PERL) $(<) void $(@)
 
@@ -39,9 +42,13 @@ $(obj)/sha256-riscv64-zvkb-zvknha_or_zvknhb.S: $(src)/sha256-riscv64-zvkb-zvknha
 $(obj)/sha512-riscv64-zvkb-zvknhb.S: $(src)/sha512-riscv64-zvkb-zvknhb.pl
 	$(call cmd,perlasm)
 
+$(obj)/sm4-riscv64-zvksed.S: $(src)/sm4-riscv64-zvksed.pl
+	$(call cmd,perlasm)
+
 clean-files += aes-riscv64-zvkned.S
 clean-files += aes-riscv64-zvbb-zvkg-zvkned.S
 clean-files += aes-riscv64-zvkb-zvkned.S
 clean-files += ghash-riscv64-zvkg.S
 clean-files += sha256-riscv64-zvkb-zvknha_or_zvknhb.S
 clean-files += sha512-riscv64-zvkb-zvknhb.S
+clean-files += sm4-riscv64-zvksed.S
diff --git a/arch/riscv/crypto/sm4-riscv64-glue.c b/arch/riscv/crypto/sm4-riscv64-glue.c
new file mode 100644
index 000000000000..2d9983a4b1ee
--- /dev/null
+++ b/arch/riscv/crypto/sm4-riscv64-glue.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Linux/riscv64 port of the OpenSSL SM4 implementation for RISC-V 64
+ *
+ * Copyright (C) 2023 VRULL GmbH
+ * Author: Heiko Stuebner <heiko.stuebner@...ll.eu>
+ *
+ * Copyright (C) 2023 SiFive, Inc.
+ * Author: Jerry Shih <jerry.shih@...ive.com>
+ */
+
+#include <asm/simd.h>
+#include <asm/vector.h>
+#include <crypto/sm4.h>
+#include <crypto/internal/cipher.h>
+#include <crypto/internal/simd.h>
+#include <linux/crypto.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+/* sm4 using zvksed vector crypto extension */
+void rv64i_zvksed_sm4_encrypt(const u8 *in, u8 *out, const u32 *key);
+void rv64i_zvksed_sm4_decrypt(const u8 *in, u8 *out, const u32 *key);
+int rv64i_zvksed_sm4_set_key(const u8 *userKey, unsigned int key_len,
+			     u32 *enc_key, u32 *dec_key);
+
+static int riscv64_sm4_setkey_zvksed(struct crypto_tfm *tfm, const u8 *key,
+				     unsigned int key_len)
+{
+	struct sm4_ctx *ctx = crypto_tfm_ctx(tfm);
+	int ret = 0;
+
+	if (crypto_simd_usable()) {
+		kernel_vector_begin();
+		if (rv64i_zvksed_sm4_set_key(key, key_len, ctx->rkey_enc,
+					     ctx->rkey_dec))
+			ret = -EINVAL;
+		kernel_vector_end();
+	} else {
+		ret = sm4_expandkey(ctx, key, key_len);
+	}
+
+	return ret;
+}
+
+static void riscv64_sm4_encrypt_zvksed(struct crypto_tfm *tfm, u8 *dst,
+				       const u8 *src)
+{
+	const struct sm4_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	if (crypto_simd_usable()) {
+		kernel_vector_begin();
+		rv64i_zvksed_sm4_encrypt(src, dst, ctx->rkey_enc);
+		kernel_vector_end();
+	} else {
+		sm4_crypt_block(ctx->rkey_enc, dst, src);
+	}
+}
+
+static void riscv64_sm4_decrypt_zvksed(struct crypto_tfm *tfm, u8 *dst,
+				       const u8 *src)
+{
+	const struct sm4_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	if (crypto_simd_usable()) {
+		kernel_vector_begin();
+		rv64i_zvksed_sm4_decrypt(src, dst, ctx->rkey_dec);
+		kernel_vector_end();
+	} else {
+		sm4_crypt_block(ctx->rkey_dec, dst, src);
+	}
+}
+
+struct crypto_alg riscv64_sm4_zvksed_alg = {
+	.cra_name = "sm4",
+	.cra_driver_name = "sm4-riscv64-zvkb-zvksed",
+	.cra_module = THIS_MODULE,
+	.cra_priority = 300,
+	.cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+	.cra_blocksize = SM4_BLOCK_SIZE,
+	.cra_ctxsize = sizeof(struct sm4_ctx),
+	.cra_cipher = {
+		.cia_min_keysize = SM4_KEY_SIZE,
+		.cia_max_keysize = SM4_KEY_SIZE,
+		.cia_setkey = riscv64_sm4_setkey_zvksed,
+		.cia_encrypt = riscv64_sm4_encrypt_zvksed,
+		.cia_decrypt = riscv64_sm4_decrypt_zvksed,
+	},
+};
+
+static inline bool check_sm4_ext(void)
+{
+	return riscv_isa_extension_available(NULL, ZVKSED) &&
+	       riscv_isa_extension_available(NULL, ZVKB) &&
+	       riscv_vector_vlen() >= 128;
+}
+
+static int __init riscv64_sm4_mod_init(void)
+{
+	if (check_sm4_ext())
+		return crypto_register_alg(&riscv64_sm4_zvksed_alg);
+
+	return -ENODEV;
+}
+
+static void __exit riscv64_sm4_mod_fini(void)
+{
+	if (check_sm4_ext())
+		crypto_unregister_alg(&riscv64_sm4_zvksed_alg);
+}
+
+module_init(riscv64_sm4_mod_init);
+module_exit(riscv64_sm4_mod_fini);
+
+MODULE_DESCRIPTION("SM4 (RISC-V accelerated)");
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@...ll.eu>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CRYPTO("sm4");
diff --git a/arch/riscv/crypto/sm4-riscv64-zvksed.pl b/arch/riscv/crypto/sm4-riscv64-zvksed.pl
new file mode 100644
index 000000000000..a764668c8398
--- /dev/null
+++ b/arch/riscv/crypto/sm4-riscv64-zvksed.pl
@@ -0,0 +1,268 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: Apache-2.0 OR BSD-2-Clause
+#
+# This file is dual-licensed, meaning that you can use it under your
+# choice of either of the following two licenses:
+#
+# Copyright 2023 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the Apache License 2.0 (the "License"). You can obtain
+# a copy in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+#
+# or
+#
+# Copyright (c) 2023, Christoph Müllner <christoph.muellner@...ll.eu>
+# Copyright (c) 2023, Jerry Shih <jerry.shih@...ive.com>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# The generated code of this file depends on the following RISC-V extensions:
+# - RV64I
+# - RISC-V Vector ('V') with VLEN >= 128
+# - RISC-V Vector Cryptography Bit-manipulation extension ('Zvkb')
+# - RISC-V Vector SM4 Block Cipher extension ('Zvksed')
+
+use strict;
+use warnings;
+
+use FindBin qw($Bin);
+use lib "$Bin";
+use lib "$Bin/../../perlasm";
+use riscv;
+
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+my $flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+
+$output and open STDOUT,">$output";
+
+my $code=<<___;
+.text
+___
+
+####
+# int rv64i_zvksed_sm4_set_key(const u8 *userKey, unsigned int key_len,
+#			                         u32 *enc_key, u32 *dec_key);
+#
+{
+my ($ukey,$key_len,$enc_key,$dec_key)=("a0","a1","a2","a3");
+my ($fk,$stride)=("a4","a5");
+my ($t0,$t1)=("t0","t1");
+my ($vukey,$vfk,$vk0,$vk1,$vk2,$vk3,$vk4,$vk5,$vk6,$vk7)=("v1","v2","v3","v4","v5","v6","v7","v8","v9","v10");
+$code .= <<___;
+.p2align 3
+.globl rv64i_zvksed_sm4_set_key
+.type rv64i_zvksed_sm4_set_key,\@function
+rv64i_zvksed_sm4_set_key:
+    li $t0, 16
+    beq $t0, $key_len, 1f
+    li a0, 1
+    ret
+1:
+
+    @{[vsetivli "zero", 4, "e32", "m1", "ta", "ma"]}
+
+    # Load the user key
+    @{[vle32_v $vukey, $ukey]}
+    @{[vrev8_v $vukey, $vukey]}
+
+    # Load the FK.
+    la $fk, FK
+    @{[vle32_v $vfk, $fk]}
+
+    # Generate round keys.
+    @{[vxor_vv $vukey, $vukey, $vfk]}
+    @{[vsm4k_vi $vk0, $vukey, 0]} # rk[0:3]
+    @{[vsm4k_vi $vk1, $vk0, 1]} # rk[4:7]
+    @{[vsm4k_vi $vk2, $vk1, 2]} # rk[8:11]
+    @{[vsm4k_vi $vk3, $vk2, 3]} # rk[12:15]
+    @{[vsm4k_vi $vk4, $vk3, 4]} # rk[16:19]
+    @{[vsm4k_vi $vk5, $vk4, 5]} # rk[20:23]
+    @{[vsm4k_vi $vk6, $vk5, 6]} # rk[24:27]
+    @{[vsm4k_vi $vk7, $vk6, 7]} # rk[28:31]
+
+    # Store enc round keys
+    @{[vse32_v $vk0, $enc_key]} # rk[0:3]
+    addi $enc_key, $enc_key, 16
+    @{[vse32_v $vk1, $enc_key]} # rk[4:7]
+    addi $enc_key, $enc_key, 16
+    @{[vse32_v $vk2, $enc_key]} # rk[8:11]
+    addi $enc_key, $enc_key, 16
+    @{[vse32_v $vk3, $enc_key]} # rk[12:15]
+    addi $enc_key, $enc_key, 16
+    @{[vse32_v $vk4, $enc_key]} # rk[16:19]
+    addi $enc_key, $enc_key, 16
+    @{[vse32_v $vk5, $enc_key]} # rk[20:23]
+    addi $enc_key, $enc_key, 16
+    @{[vse32_v $vk6, $enc_key]} # rk[24:27]
+    addi $enc_key, $enc_key, 16
+    @{[vse32_v $vk7, $enc_key]} # rk[28:31]
+
+    # Store dec round keys in reverse order
+    addi $dec_key, $dec_key, 12
+    li $stride, -4
+    @{[vsse32_v $vk7, $dec_key, $stride]} # rk[31:28]
+    addi $dec_key, $dec_key, 16
+    @{[vsse32_v $vk6, $dec_key, $stride]} # rk[27:24]
+    addi $dec_key, $dec_key, 16
+    @{[vsse32_v $vk5, $dec_key, $stride]} # rk[23:20]
+    addi $dec_key, $dec_key, 16
+    @{[vsse32_v $vk4, $dec_key, $stride]} # rk[19:16]
+    addi $dec_key, $dec_key, 16
+    @{[vsse32_v $vk3, $dec_key, $stride]} # rk[15:12]
+    addi $dec_key, $dec_key, 16
+    @{[vsse32_v $vk2, $dec_key, $stride]} # rk[11:8]
+    addi $dec_key, $dec_key, 16
+    @{[vsse32_v $vk1, $dec_key, $stride]} # rk[7:4]
+    addi $dec_key, $dec_key, 16
+    @{[vsse32_v $vk0, $dec_key, $stride]} # rk[3:0]
+
+    li a0, 0
+    ret
+.size rv64i_zvksed_sm4_set_key,.-rv64i_zvksed_sm4_set_key
+___
+}
+
+####
+# void rv64i_zvksed_sm4_encrypt(const unsigned char *in, unsigned char *out,
+#                               const SM4_KEY *key);
+#
+{
+my ($in,$out,$keys,$stride)=("a0","a1","a2","t0");
+my ($vdata,$vk0,$vk1,$vk2,$vk3,$vk4,$vk5,$vk6,$vk7,$vgen)=("v1","v2","v3","v4","v5","v6","v7","v8","v9","v10");
+$code .= <<___;
+.p2align 3
+.globl rv64i_zvksed_sm4_encrypt
+.type rv64i_zvksed_sm4_encrypt,\@function
+rv64i_zvksed_sm4_encrypt:
+    @{[vsetivli "zero", 4, "e32", "m1", "ta", "ma"]}
+
+    # Load input data
+    @{[vle32_v $vdata, $in]}
+    @{[vrev8_v $vdata, $vdata]}
+
+    # Order of elements was adjusted in sm4_set_key()
+    # Encrypt with all keys
+    @{[vle32_v $vk0, $keys]} # rk[0:3]
+    @{[vsm4r_vs $vdata, $vk0]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk1, $keys]} # rk[4:7]
+    @{[vsm4r_vs $vdata, $vk1]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk2, $keys]} # rk[8:11]
+    @{[vsm4r_vs $vdata, $vk2]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk3, $keys]} # rk[12:15]
+    @{[vsm4r_vs $vdata, $vk3]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk4, $keys]} # rk[16:19]
+    @{[vsm4r_vs $vdata, $vk4]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk5, $keys]} # rk[20:23]
+    @{[vsm4r_vs $vdata, $vk5]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk6, $keys]} # rk[24:27]
+    @{[vsm4r_vs $vdata, $vk6]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk7, $keys]} # rk[28:31]
+    @{[vsm4r_vs $vdata, $vk7]}
+
+    # Save the ciphertext (in reverse element order)
+    @{[vrev8_v $vdata, $vdata]}
+    li $stride, -4
+    addi $out, $out, 12
+    @{[vsse32_v $vdata, $out, $stride]}
+
+    ret
+.size rv64i_zvksed_sm4_encrypt,.-rv64i_zvksed_sm4_encrypt
+___
+}
+
+####
+# void rv64i_zvksed_sm4_decrypt(const unsigned char *in, unsigned char *out,
+#                               const SM4_KEY *key);
+#
+{
+my ($in,$out,$keys,$stride)=("a0","a1","a2","t0");
+my ($vdata,$vk0,$vk1,$vk2,$vk3,$vk4,$vk5,$vk6,$vk7,$vgen)=("v1","v2","v3","v4","v5","v6","v7","v8","v9","v10");
+$code .= <<___;
+.p2align 3
+.globl rv64i_zvksed_sm4_decrypt
+.type rv64i_zvksed_sm4_decrypt,\@function
+rv64i_zvksed_sm4_decrypt:
+    @{[vsetivli "zero", 4, "e32", "m1", "ta", "ma"]}
+
+    # Load input data
+    @{[vle32_v $vdata, $in]}
+    @{[vrev8_v $vdata, $vdata]}
+
+    # Order of key elements was adjusted in sm4_set_key()
+    # Decrypt with all keys
+    @{[vle32_v $vk7, $keys]} # rk[31:28]
+    @{[vsm4r_vs $vdata, $vk7]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk6, $keys]} # rk[27:24]
+    @{[vsm4r_vs $vdata, $vk6]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk5, $keys]} # rk[23:20]
+    @{[vsm4r_vs $vdata, $vk5]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk4, $keys]} # rk[19:16]
+    @{[vsm4r_vs $vdata, $vk4]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk3, $keys]} # rk[15:11]
+    @{[vsm4r_vs $vdata, $vk3]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk2, $keys]} # rk[11:8]
+    @{[vsm4r_vs $vdata, $vk2]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk1, $keys]} # rk[7:4]
+    @{[vsm4r_vs $vdata, $vk1]}
+    addi $keys, $keys, 16
+    @{[vle32_v $vk0, $keys]} # rk[3:0]
+    @{[vsm4r_vs $vdata, $vk0]}
+
+    # Save the ciphertext (in reverse element order)
+    @{[vrev8_v $vdata, $vdata]}
+    li $stride, -4
+    addi $out, $out, 12
+    @{[vsse32_v $vdata, $out, $stride]}
+
+    ret
+.size rv64i_zvksed_sm4_decrypt,.-rv64i_zvksed_sm4_decrypt
+___
+}
+
+$code .= <<___;
+# Family Key (little-endian 32-bit chunks)
+.p2align 3
+FK:
+    .word 0xA3B1BAC6, 0x56AA3350, 0x677D9197, 0xB27022DC
+.size FK,.-FK
+___
+
+print $code;
+
+close STDOUT or die "error closing STDOUT: $!";
-- 
2.28.0

Powered by blists - more mailing lists