lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 26 Oct 2023 02:36:43 +0800
From:   Jerry Shih <jerry.shih@...ive.com>
To:     paul.walmsley@...ive.com, palmer@...belt.com,
        aou@...s.berkeley.edu, herbert@...dor.apana.org.au,
        davem@...emloft.net
Cc:     andy.chiu@...ive.com, greentime.hu@...ive.com,
        conor.dooley@...rochip.com, guoren@...nel.org, bjorn@...osinc.com,
        heiko@...ech.de, ebiggers@...nel.org, ardb@...nel.org,
        phoebe.chen@...ive.com, hongrong.hsu@...ive.com,
        linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-crypto@...r.kernel.org
Subject: [PATCH 11/12] RISC-V: crypto: add Zvksh accelerated SM3 implementation

Add SM3 implementation using Zvksh vector crypto extension from OpenSSL
(openssl/openssl#21923).

Co-developed-by: Christoph Müllner <christoph.muellner@...ll.eu>
Signed-off-by: Christoph Müllner <christoph.muellner@...ll.eu>
Co-developed-by: Heiko Stuebner <heiko.stuebner@...ll.eu>
Signed-off-by: Heiko Stuebner <heiko.stuebner@...ll.eu>
Signed-off-by: Jerry Shih <jerry.shih@...ive.com>
---
 arch/riscv/crypto/Kconfig              |  13 ++
 arch/riscv/crypto/Makefile             |   7 +
 arch/riscv/crypto/sm3-riscv64-glue.c   | 121 +++++++++++++
 arch/riscv/crypto/sm3-riscv64-zvksh.pl | 230 +++++++++++++++++++++++++
 4 files changed, 371 insertions(+)
 create mode 100644 arch/riscv/crypto/sm3-riscv64-glue.c
 create mode 100644 arch/riscv/crypto/sm3-riscv64-zvksh.pl

diff --git a/arch/riscv/crypto/Kconfig b/arch/riscv/crypto/Kconfig
index ff004afa2874..2797b37394bb 100644
--- a/arch/riscv/crypto/Kconfig
+++ b/arch/riscv/crypto/Kconfig
@@ -75,6 +75,19 @@ config CRYPTO_SHA512_RISCV64
 	  - Zvkb vector crypto extension
 	  - Zvknhb vector crypto extension
 
+config CRYPTO_SM3_RISCV64
+	default y if RISCV_ISA_V
+	tristate "Hash functions: SM3 (ShangMi 3)"
+	depends on 64BIT && RISCV_ISA_V
+	select CRYPTO_HASH
+	select CRYPTO_SM3
+	help
+	  SM3 (ShangMi 3) secure hash function (OSCCA GM/T 0004-2012)
+
+	  Architecture: riscv64 using:
+	  - Zvkb vector crypto extension
+	  - Zvksh vector crypto extension
+
 config CRYPTO_SM4_RISCV64
 	default y if RISCV_ISA_V
 	tristate "Ciphers: SM4 (ShangMi 4)"
diff --git a/arch/riscv/crypto/Makefile b/arch/riscv/crypto/Makefile
index ffad095e531f..b772417703fd 100644
--- a/arch/riscv/crypto/Makefile
+++ b/arch/riscv/crypto/Makefile
@@ -18,6 +18,9 @@ sha256-riscv64-y := sha256-riscv64-glue.o sha256-riscv64-zvkb-zvknha_or_zvknhb.o
 obj-$(CONFIG_CRYPTO_SHA512_RISCV64) += sha512-riscv64.o
 sha512-riscv64-y := sha512-riscv64-glue.o sha512-riscv64-zvkb-zvknhb.o
 
+obj-$(CONFIG_CRYPTO_SM3_RISCV64) += sm3-riscv64.o
+sm3-riscv64-y := sm3-riscv64-glue.o sm3-riscv64-zvksh.o
+
 obj-$(CONFIG_CRYPTO_SM4_RISCV64) += sm4-riscv64.o
 sm4-riscv64-y := sm4-riscv64-glue.o sm4-riscv64-zvksed.o
 
@@ -42,6 +45,9 @@ $(obj)/sha256-riscv64-zvkb-zvknha_or_zvknhb.S: $(src)/sha256-riscv64-zvkb-zvknha
 $(obj)/sha512-riscv64-zvkb-zvknhb.S: $(src)/sha512-riscv64-zvkb-zvknhb.pl
 	$(call cmd,perlasm)
 
+$(obj)/sm3-riscv64-zvksh.S: $(src)/sm3-riscv64-zvksh.pl
+	$(call cmd,perlasm)
+
 $(obj)/sm4-riscv64-zvksed.S: $(src)/sm4-riscv64-zvksed.pl
 	$(call cmd,perlasm)
 
@@ -51,4 +57,5 @@ clean-files += aes-riscv64-zvkb-zvkned.S
 clean-files += ghash-riscv64-zvkg.S
 clean-files += sha256-riscv64-zvkb-zvknha_or_zvknhb.S
 clean-files += sha512-riscv64-zvkb-zvknhb.S
+clean-files += sm3-riscv64-zvksh.S
 clean-files += sm4-riscv64-zvksed.S
diff --git a/arch/riscv/crypto/sm3-riscv64-glue.c b/arch/riscv/crypto/sm3-riscv64-glue.c
new file mode 100644
index 000000000000..32d37b602e54
--- /dev/null
+++ b/arch/riscv/crypto/sm3-riscv64-glue.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Linux/riscv64 port of the OpenSSL SM3 implementation for RISC-V 64
+ *
+ * Copyright (C) 2023 VRULL GmbH
+ * Author: Heiko Stuebner <heiko.stuebner@...ll.eu>
+ */
+
+#include <asm/simd.h>
+#include <asm/vector.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <crypto/sm3_base.h>
+
+/*
+ * sm3 using zvksh vector crypto extension
+ *
+ * This asm function will just take the first 256-bit as the sm3 state from
+ * the pointer to `struct sm3_state`.
+ */
+void ossl_hwsm3_block_data_order_zvksh(struct sm3_state *digest, u8 const *o,
+				       int num);
+
+static int riscv64_sm3_update(struct shash_desc *desc, const u8 *data,
+			      unsigned int len)
+{
+	int ret = 0;
+
+	/*
+	 * Make sure struct sm3_state begins directly with the SM3 256-bit internal
+	 * state, as this is what the asm function expect.
+	 */
+	BUILD_BUG_ON(offsetof(struct sm3_state, state) != 0);
+
+	if (crypto_simd_usable()) {
+		kernel_vector_begin();
+		ret = sm3_base_do_update(desc, data, len,
+					 ossl_hwsm3_block_data_order_zvksh);
+		kernel_vector_end();
+	} else {
+		sm3_update(shash_desc_ctx(desc), data, len);
+	}
+
+	return ret;
+}
+
+static int riscv64_sm3_finup(struct shash_desc *desc, const u8 *data,
+			     unsigned int len, u8 *out)
+{
+	struct sm3_state *ctx;
+
+	if (crypto_simd_usable()) {
+		kernel_vector_begin();
+		if (len)
+			sm3_base_do_update(desc, data, len,
+					   ossl_hwsm3_block_data_order_zvksh);
+		sm3_base_do_finalize(desc, ossl_hwsm3_block_data_order_zvksh);
+		kernel_vector_end();
+
+		return sm3_base_finish(desc, out);
+	}
+
+	ctx = shash_desc_ctx(desc);
+	if (len)
+		sm3_update(ctx, data, len);
+	sm3_final(ctx, out);
+
+	return 0;
+}
+
+static int riscv64_sm3_final(struct shash_desc *desc, u8 *out)
+{
+	return riscv64_sm3_finup(desc, NULL, 0, out);
+}
+
+static struct shash_alg sm3_alg = {
+	.digestsize = SM3_DIGEST_SIZE,
+	.init = sm3_base_init,
+	.update = riscv64_sm3_update,
+	.final = riscv64_sm3_final,
+	.finup = riscv64_sm3_finup,
+	.descsize = sizeof(struct sm3_state),
+	.base.cra_name = "sm3",
+	.base.cra_driver_name = "sm3-riscv64-zvkb-zvksh",
+	.base.cra_priority = 150,
+	.base.cra_blocksize = SM3_BLOCK_SIZE,
+	.base.cra_module = THIS_MODULE,
+};
+
+static inline bool check_sm3_ext(void)
+{
+	return riscv_isa_extension_available(NULL, ZVKSH) &&
+	       riscv_isa_extension_available(NULL, ZVKB) &&
+	       riscv_vector_vlen() >= 128;
+}
+
+static int __init riscv64_riscv64_sm3_mod_init(void)
+{
+	if (check_sm3_ext())
+		return crypto_register_shash(&sm3_alg);
+
+	return -ENODEV;
+}
+
+static void __exit riscv64_sm3_mod_fini(void)
+{
+	if (check_sm3_ext())
+		crypto_unregister_shash(&sm3_alg);
+}
+
+module_init(riscv64_riscv64_sm3_mod_init);
+module_exit(riscv64_sm3_mod_fini);
+
+MODULE_DESCRIPTION("SM3 (RISC-V accelerated)");
+MODULE_AUTHOR("Andy Polyakov <appro@...nssl.org>");
+MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@...aro.org>");
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@...ll.eu>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CRYPTO("sm3");
diff --git a/arch/riscv/crypto/sm3-riscv64-zvksh.pl b/arch/riscv/crypto/sm3-riscv64-zvksh.pl
new file mode 100644
index 000000000000..942d78d982e9
--- /dev/null
+++ b/arch/riscv/crypto/sm3-riscv64-zvksh.pl
@@ -0,0 +1,230 @@
+#! /usr/bin/env perl
+# SPDX-License-Identifier: Apache-2.0 OR BSD-2-Clause
+#
+# This file is dual-licensed, meaning that you can use it under your
+# choice of either of the following two licenses:
+#
+# Copyright 2023 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the Apache License 2.0 (the "License"). You can obtain
+# a copy in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+#
+# or
+#
+# Copyright (c) 2023, Christoph Müllner <christoph.muellner@...ll.eu>
+# Copyright (c) 2023, Jerry Shih <jerry.shih@...ive.com>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# The generated code of this file depends on the following RISC-V extensions:
+# - RV64I
+# - RISC-V Vector ('V') with VLEN >= 128
+# - RISC-V Vector Cryptography Bit-manipulation extension ('Zvkb')
+# - RISC-V Vector SM3 Secure Hash extension ('Zvksh')
+
+use strict;
+use warnings;
+
+use FindBin qw($Bin);
+use lib "$Bin";
+use lib "$Bin/../../perlasm";
+use riscv;
+
+# $output is the last argument if it looks like a file (it has an extension)
+# $flavour is the first argument if it doesn't look like a file
+my $output = $#ARGV >= 0 && $ARGV[$#ARGV] =~ m|\.\w+$| ? pop : undef;
+my $flavour = $#ARGV >= 0 && $ARGV[0] !~ m|\.| ? shift : undef;
+
+$output and open STDOUT,">$output";
+
+my $code=<<___;
+.text
+___
+
+################################################################################
+# ossl_hwsm3_block_data_order_zvksh(SM3_CTX *c, const void *p, size_t num);
+{
+my ($CTX, $INPUT, $NUM) = ("a0", "a1", "a2");
+my ($V0, $V1, $V2, $V3, $V4, $V5, $V6, $V7,
+    $V8, $V9, $V10, $V11, $V12, $V13, $V14, $V15,
+    $V16, $V17, $V18, $V19, $V20, $V21, $V22, $V23,
+    $V24, $V25, $V26, $V27, $V28, $V29, $V30, $V31,
+) = map("v$_",(0..31));
+
+$code .= <<___;
+.text
+.p2align 3
+.globl ossl_hwsm3_block_data_order_zvksh
+.type ossl_hwsm3_block_data_order_zvksh,\@function
+ossl_hwsm3_block_data_order_zvksh:
+    @{[vsetivli "zero", 8, "e32", "m2", "ta", "ma"]}
+
+    # Load initial state of hash context (c->A-H).
+    @{[vle32_v $V0, $CTX]}
+    @{[vrev8_v $V0, $V0]}
+
+L_sm3_loop:
+    # Copy the previous state to v2.
+    # It will be XOR'ed with the current state at the end of the round.
+    @{[vmv_v_v $V2, $V0]}
+
+    # Load the 64B block in 2x32B chunks.
+    @{[vle32_v $V6, $INPUT]} # v6 := {w7, ..., w0}
+    addi $INPUT, $INPUT, 32
+
+    @{[vle32_v $V8, $INPUT]} # v8 := {w15, ..., w8}
+    addi $INPUT, $INPUT, 32
+
+    addi $NUM, $NUM, -1
+
+    # As vsm3c consumes only w0, w1, w4, w5 we need to slide the input
+    # 2 elements down so we process elements w2, w3, w6, w7
+    # This will be repeated for each odd round.
+    @{[vslidedown_vi $V4, $V6, 2]} # v4 := {X, X, w7, ..., w2}
+
+    @{[vsm3c_vi $V0, $V6, 0]}
+    @{[vsm3c_vi $V0, $V4, 1]}
+
+    # Prepare a vector with {w11, ..., w4}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, X, X, w7, ..., w4}
+    @{[vslideup_vi $V4, $V8, 4]}   # v4 := {w11, w10, w9, w8, w7, w6, w5, w4}
+
+    @{[vsm3c_vi $V0, $V4, 2]}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, w11, w10, w9, w8, w7, w6}
+    @{[vsm3c_vi $V0, $V4, 3]}
+
+    @{[vsm3c_vi $V0, $V8, 4]}
+    @{[vslidedown_vi $V4, $V8, 2]} # v4 := {X, X, w15, w14, w13, w12, w11, w10}
+    @{[vsm3c_vi $V0, $V4, 5]}
+
+    @{[vsm3me_vv $V6, $V8, $V6]}   # v6 := {w23, w22, w21, w20, w19, w18, w17, w16}
+
+    # Prepare a register with {w19, w18, w17, w16, w15, w14, w13, w12}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, X, X, w15, w14, w13, w12}
+    @{[vslideup_vi $V4, $V6, 4]}   # v4 := {w19, w18, w17, w16, w15, w14, w13, w12}
+
+    @{[vsm3c_vi $V0, $V4, 6]}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, w19, w18, w17, w16, w15, w14}
+    @{[vsm3c_vi $V0, $V4, 7]}
+
+    @{[vsm3c_vi $V0, $V6, 8]}
+    @{[vslidedown_vi $V4, $V6, 2]} # v4 := {X, X, w23, w22, w21, w20, w19, w18}
+    @{[vsm3c_vi $V0, $V4, 9]}
+
+    @{[vsm3me_vv $V8, $V6, $V8]}   # v8 := {w31, w30, w29, w28, w27, w26, w25, w24}
+
+    # Prepare a register with {w27, w26, w25, w24, w23, w22, w21, w20}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, X, X, w23, w22, w21, w20}
+    @{[vslideup_vi $V4, $V8, 4]}   # v4 := {w27, w26, w25, w24, w23, w22, w21, w20}
+
+    @{[vsm3c_vi $V0, $V4, 10]}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, w27, w26, w25, w24, w23, w22}
+    @{[vsm3c_vi $V0, $V4, 11]}
+
+    @{[vsm3c_vi $V0, $V8, 12]}
+    @{[vslidedown_vi $V4, $V8, 2]} # v4 := {x, X, w31, w30, w29, w28, w27, w26}
+    @{[vsm3c_vi $V0, $V4, 13]}
+
+    @{[vsm3me_vv $V6, $V8, $V6]}   # v6 := {w32, w33, w34, w35, w36, w37, w38, w39}
+
+    # Prepare a register with {w35, w34, w33, w32, w31, w30, w29, w28}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, X, X, w31, w30, w29, w28}
+    @{[vslideup_vi $V4, $V6, 4]}   # v4 := {w35, w34, w33, w32, w31, w30, w29, w28}
+
+    @{[vsm3c_vi $V0, $V4, 14]}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, w35, w34, w33, w32, w31, w30}
+    @{[vsm3c_vi $V0, $V4, 15]}
+
+    @{[vsm3c_vi $V0, $V6, 16]}
+    @{[vslidedown_vi $V4, $V6, 2]} # v4 := {X, X, w39, w38, w37, w36, w35, w34}
+    @{[vsm3c_vi $V0, $V4, 17]}
+
+    @{[vsm3me_vv $V8, $V6, $V8]}   # v8 := {w47, w46, w45, w44, w43, w42, w41, w40}
+
+    # Prepare a register with {w43, w42, w41, w40, w39, w38, w37, w36}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, X, X, w39, w38, w37, w36}
+    @{[vslideup_vi $V4, $V8, 4]}   # v4 := {w43, w42, w41, w40, w39, w38, w37, w36}
+
+    @{[vsm3c_vi $V0, $V4, 18]}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, w43, w42, w41, w40, w39, w38}
+    @{[vsm3c_vi $V0, $V4, 19]}
+
+    @{[vsm3c_vi $V0, $V8, 20]}
+    @{[vslidedown_vi $V4, $V8, 2]} # v4 := {X, X, w47, w46, w45, w44, w43, w42}
+    @{[vsm3c_vi $V0, $V4, 21]}
+
+    @{[vsm3me_vv $V6, $V8, $V6]}   # v6 := {w55, w54, w53, w52, w51, w50, w49, w48}
+
+    # Prepare a register with {w51, w50, w49, w48, w47, w46, w45, w44}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, X, X, w47, w46, w45, w44}
+    @{[vslideup_vi $V4, $V6, 4]}   # v4 := {w51, w50, w49, w48, w47, w46, w45, w44}
+
+    @{[vsm3c_vi $V0, $V4, 22]}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, w51, w50, w49, w48, w47, w46}
+    @{[vsm3c_vi $V0, $V4, 23]}
+
+    @{[vsm3c_vi $V0, $V6, 24]}
+    @{[vslidedown_vi $V4, $V6, 2]} # v4 := {X, X, w55, w54, w53, w52, w51, w50}
+    @{[vsm3c_vi $V0, $V4, 25]}
+
+    @{[vsm3me_vv $V8, $V6, $V8]}   # v8 := {w63, w62, w61, w60, w59, w58, w57, w56}
+
+    # Prepare a register with {w59, w58, w57, w56, w55, w54, w53, w52}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, X, X, w55, w54, w53, w52}
+    @{[vslideup_vi $V4, $V8, 4]}   # v4 := {w59, w58, w57, w56, w55, w54, w53, w52}
+
+    @{[vsm3c_vi $V0, $V4, 26]}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, w59, w58, w57, w56, w55, w54}
+    @{[vsm3c_vi $V0, $V4, 27]}
+
+    @{[vsm3c_vi $V0, $V8, 28]}
+    @{[vslidedown_vi $V4, $V8, 2]} # v4 := {X, X, w63, w62, w61, w60, w59, w58}
+    @{[vsm3c_vi $V0, $V4, 29]}
+
+    @{[vsm3me_vv $V6, $V8, $V6]}   # v6 := {w71, w70, w69, w68, w67, w66, w65, w64}
+
+    # Prepare a register with {w67, w66, w65, w64, w63, w62, w61, w60}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, X, X, w63, w62, w61, w60}
+    @{[vslideup_vi $V4, $V6, 4]}   # v4 := {w67, w66, w65, w64, w63, w62, w61, w60}
+
+    @{[vsm3c_vi $V0, $V4, 30]}
+    @{[vslidedown_vi $V4, $V4, 2]} # v4 := {X, X, w67, w66, w65, w64, w63, w62}
+    @{[vsm3c_vi $V0, $V4, 31]}
+
+    # XOR in the previous state.
+    @{[vxor_vv $V0, $V0, $V2]}
+
+    bnez $NUM, L_sm3_loop     # Check if there are any more block to process
+L_sm3_end:
+    @{[vrev8_v $V0, $V0]}
+    @{[vse32_v $V0, $CTX]}
+    ret
+
+.size ossl_hwsm3_block_data_order_zvksh,.-ossl_hwsm3_block_data_order_zvksh
+___
+}
+
+print $code;
+
+close STDOUT or die "error closing STDOUT: $!";
-- 
2.28.0

Powered by blists - more mailing lists