| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <3c2a48d0-454a-4d40-ae8d-ff346d55d99d@roeck-us.net>
Date: Wed, 25 Oct 2023 12:51:23 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Tomer Maimon <tmaimon77@...il.com>
Cc: jdelvare@...e.com, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, avifishman70@...il.com,
tali.perry1@...il.com, joel@....id.au, andrew@...econstruct.com.au,
venture@...gle.com, yuenn@...gle.com, benjaminfair@...gle.com,
j.neuschaefer@....net, openbmc@...ts.ozlabs.org,
linux-hwmon@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v2 2/2] hwmon: npcm750-pwm-fan: Add NPCM8xx support
On Wed, Oct 18, 2023 at 09:19:25PM +0300, Tomer Maimon wrote:
> Adding Pulse Width Modulation (PWM) and fan tacho NPCM8xx support to
> NPCM PWM and fan tacho driver.
> NPCM8xx uses a different number of PWM devices.
>
> As part of adding NPCM8XX support:
> - Add NPCM8xx specific compatible string.
> - Add data to handle architecture-specific PWM and fan tacho parameters.
>
> Signed-off-by: Tomer Maimon <tmaimon77@...il.com>
> ---
> drivers/hwmon/npcm750-pwm-fan.c | 161 +++++++++++++++++++++++++++-----
> 1 file changed, 136 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/hwmon/npcm750-pwm-fan.c b/drivers/hwmon/npcm750-pwm-fan.c
> index 10ed3f4335d4..324de4482e71 100644
> --- a/drivers/hwmon/npcm750-pwm-fan.c
> +++ b/drivers/hwmon/npcm750-pwm-fan.c
> @@ -45,11 +45,6 @@
> #define NPCM7XX_PWM_CTRL_CH2_EN_BIT BIT(12)
> #define NPCM7XX_PWM_CTRL_CH3_EN_BIT BIT(16)
>
> -/* Define the maximum PWM channel number */
> -#define NPCM7XX_PWM_MAX_CHN_NUM 8
> -#define NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE 4
> -#define NPCM7XX_PWM_MAX_MODULES 2
> -
> /* Define the Counter Register, value = 100 for match 100% */
> #define NPCM7XX_PWM_COUNTER_DEFAULT_NUM 255
> #define NPCM7XX_PWM_CMR_DEFAULT_NUM 255
> @@ -138,11 +133,9 @@
> #define NPCM7XX_FAN_TCPCFG_CPASEL BIT(0)
>
> /* FAN General Definition */
> -/* Define the maximum FAN channel number */
> -#define NPCM7XX_FAN_MAX_MODULE 8
> +/* Define the PWM and FAN in a module */
> +#define NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE 4
> #define NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE 2
> -#define NPCM7XX_FAN_MAX_CHN_NUM 16
> -
> /*
> * Get Fan Tach Timeout (base on clock 214843.75Hz, 1 cnt = 4.654us)
> * Timeout 94ms ~= 0x5000
> @@ -171,6 +164,15 @@
> #define FAN_PREPARE_TO_GET_FIRST_CAPTURE 0x01
> #define FAN_ENOUGH_SAMPLE 0x02
>
> +struct npcm_hwmon_info {
> + u32 pwm_max_modules;
> + u32 pwm_max_ch;
> + u32 fan_max_modules;
> + u32 fan_max_ch;
> + const struct hwmon_chip_info *hinfo;
> + const char *name;
> +};
> +
> struct npcm7xx_fan_dev {
> u8 fan_st_flg;
> u8 fan_pls_per_rev;
> @@ -195,15 +197,16 @@ struct npcm7xx_pwm_fan_data {
> unsigned long fan_clk_freq;
> struct clk *pwm_clk;
> struct clk *fan_clk;
> - struct mutex pwm_lock[NPCM7XX_PWM_MAX_MODULES];
> - spinlock_t fan_lock[NPCM7XX_FAN_MAX_MODULE];
> - int fan_irq[NPCM7XX_FAN_MAX_MODULE];
> - bool pwm_present[NPCM7XX_PWM_MAX_CHN_NUM];
> - bool fan_present[NPCM7XX_FAN_MAX_CHN_NUM];
I do not see the point of making this dynamic.
Sure, there is an additional pwm channel on NPCM8xx,
so just add another entry and handle (enable/disable)
the additional channel with the is_visible function.
As written there is a lot of churn, and I am sure the code is
much larger than it was just to save a single pwm entry.
> + struct mutex *pwm_lock;
> + spinlock_t *fan_lock;
> + int *fan_irq;
> + bool *pwm_present;
> + bool *fan_present;
> u32 input_clk_freq;
> struct timer_list fan_timer;
> - struct npcm7xx_fan_dev fan_dev[NPCM7XX_FAN_MAX_CHN_NUM];
> - struct npcm7xx_cooling_device *cdev[NPCM7XX_PWM_MAX_CHN_NUM];
> + struct npcm7xx_fan_dev *fan_dev;
> + struct npcm7xx_cooling_device **cdev;
> + const struct npcm_hwmon_info *info;
> u8 fan_select;
> };
>
> @@ -333,7 +336,7 @@ static void npcm7xx_fan_polling(struct timer_list *t)
> * Polling two module per one round,
> * FAN01 & FAN89 / FAN23 & FAN1011 / FAN45 & FAN1213 / FAN67 & FAN1415
> */
> - for (i = data->fan_select; i < NPCM7XX_FAN_MAX_MODULE;
> + for (i = data->fan_select; i < data->info->fan_max_modules;
> i = i + 4) {
> /* clear the flag and reset the counter (TCNT) */
> iowrite8(NPCM7XX_FAN_TICLR_CLEAR_ALL,
> @@ -659,6 +662,40 @@ static const struct hwmon_channel_info * const npcm7xx_info[] = {
> NULL
> };
>
> +static const struct hwmon_channel_info * const npcm8xx_info[] = {
> + HWMON_CHANNEL_INFO(pwm,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT,
> + HWMON_PWM_INPUT),
> + HWMON_CHANNEL_INFO(fan,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT,
> + HWMON_F_INPUT),
> + NULL
> +};
This should be handled with the is_visible() function, not with separate
data structures.
> +
> static const struct hwmon_ops npcm7xx_hwmon_ops = {
> .is_visible = npcm7xx_is_visible,
> .read = npcm7xx_read,
> @@ -670,6 +707,29 @@ static const struct hwmon_chip_info npcm7xx_chip_info = {
> .info = npcm7xx_info,
> };
>
> +static const struct hwmon_chip_info npcm8xx_chip_info = {
> + .ops = &npcm7xx_hwmon_ops,
> + .info = npcm8xx_info,
> +};
> +
> +static const struct npcm_hwmon_info npxm7xx_hwmon_info = {
> + .pwm_max_modules = 2,
> + .pwm_max_ch = NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE * 2,
> + .fan_max_modules = 8,
> + .fan_max_ch = NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE * 8,
> + .hinfo = &npcm7xx_chip_info,
> + .name = "npcm7xx_pwm_fan",
> +};
> +
> +static const struct npcm_hwmon_info npxm8xx_hwmon_info = {
> + .pwm_max_modules = 3,
> + .pwm_max_ch = NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE * 3,
> + .fan_max_modules = 8,
> + .fan_max_ch = NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE * 8,
fan_max_modules and fan_max_ch do not change across chips, and
pwm_max_ch is always NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE times
the number of channels. This can all be dropped. Again, the only
real difference is the number of pwm channels, and that can be
handled in the _is_visible() function.
> + .hinfo = &npcm8xx_chip_info,
> + .name = "npcm8xx_pwm_fan",
> +};
> +
> static u32 npcm7xx_pwm_init(struct npcm7xx_pwm_fan_data *data)
> {
> int m, ch;
> @@ -693,7 +753,7 @@ static u32 npcm7xx_pwm_init(struct npcm7xx_pwm_fan_data *data)
> /* Setting PWM Prescale Register value register to both modules */
> prescale_val |= (prescale_val << NPCM7XX_PWM_PRESCALE_SHIFT_CH01);
>
> - for (m = 0; m < NPCM7XX_PWM_MAX_MODULES ; m++) {
> + for (m = 0; m < data->info->pwm_max_modules ; m++) {
> iowrite32(prescale_val, NPCM7XX_PWM_REG_PR(data->pwm_base, m));
> iowrite32(NPCM7XX_PWM_PRESCALE2_DEFAULT,
> NPCM7XX_PWM_REG_CSR(data->pwm_base, m));
> @@ -716,7 +776,7 @@ static void npcm7xx_fan_init(struct npcm7xx_pwm_fan_data *data)
> int i;
> u32 apb_clk_freq;
>
> - for (md = 0; md < NPCM7XX_FAN_MAX_MODULE; md++) {
> + for (md = 0; md < data->info->fan_max_modules; md++) {
> /* stop FAN0~7 clock */
> iowrite8(NPCM7XX_FAN_TCKC_CLKX_NONE,
> NPCM7XX_FAN_REG_TCKC(data->fan_base, md));
> @@ -905,6 +965,49 @@ static int npcm7xx_en_pwm_fan(struct device *dev,
> return 0;
> }
>
> +static int npcm_pwm_fan_alloc_data(struct device *dev,
> + struct npcm7xx_pwm_fan_data *data)
> +{
> + data->pwm_lock = devm_kcalloc(dev, data->info->pwm_max_modules,
> + sizeof(*data->pwm_lock), GFP_KERNEL);
> + if (!data->pwm_lock)
> + return -ENOMEM;
> +
> + data->fan_lock = devm_kcalloc(dev, data->info->fan_max_modules,
> + sizeof(*data->fan_lock), GFP_KERNEL);
> + if (!data->fan_lock)
> + return -ENOMEM;
> +
> + data->fan_irq = devm_kcalloc(dev, data->info->fan_max_modules,
> + sizeof(*data->fan_irq), GFP_KERNEL);
> + if (!data->fan_irq)
> + return -ENOMEM;
> +
> + data->pwm_present = devm_kcalloc(dev, data->info->pwm_max_ch,
> + sizeof(*data->pwm_present),
> + GFP_KERNEL);
> + if (!data->pwm_present)
> + return -ENOMEM;
> +
> + data->fan_present = devm_kcalloc(dev, data->info->fan_max_ch,
> + sizeof(*data->fan_present),
> + GFP_KERNEL);
> + if (!data->fan_present)
> + return -ENOMEM;
> +
> + data->fan_dev = devm_kcalloc(dev, data->info->fan_max_ch,
> + sizeof(*data->fan_dev), GFP_KERNEL);
> + if (!data->fan_dev)
> + return -ENOMEM;
> +
> + data->cdev = devm_kcalloc(dev, data->info->pwm_max_ch,
> + sizeof(*data->cdev), GFP_KERNEL);
> + if (!data->cdev)
> + return -ENOMEM;
> +
> + return 0;
> +}
> +
> static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -923,6 +1026,13 @@ static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
> if (!data)
> return -ENOMEM;
>
> + data->info = device_get_match_data(dev);
> + if (!data->info)
> + return -EINVAL;
> +
> + if (npcm_pwm_fan_alloc_data(dev, data))
> + return -ENOMEM;
> +
> res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm");
> if (!res) {
> dev_err(dev, "pwm resource not found\n");
> @@ -960,10 +1070,10 @@ static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
> output_freq = npcm7xx_pwm_init(data);
> npcm7xx_fan_init(data);
>
> - for (cnt = 0; cnt < NPCM7XX_PWM_MAX_MODULES ; cnt++)
> + for (cnt = 0; cnt < data->info->pwm_max_modules ; cnt++)
> mutex_init(&data->pwm_lock[cnt]);
>
> - for (i = 0; i < NPCM7XX_FAN_MAX_MODULE; i++) {
> + for (i = 0; i < data->info->fan_max_modules; i++) {
> spin_lock_init(&data->fan_lock[i]);
>
> data->fan_irq[i] = platform_get_irq(pdev, i);
> @@ -988,15 +1098,15 @@ static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
> }
> }
>
> - hwmon = devm_hwmon_device_register_with_info(dev, "npcm7xx_pwm_fan",
> - data, &npcm7xx_chip_info,
> + hwmon = devm_hwmon_device_register_with_info(dev, data->info->name,
> + data, data->info->hinfo,
> NULL);
> if (IS_ERR(hwmon)) {
> dev_err(dev, "unable to register hwmon device\n");
> return PTR_ERR(hwmon);
> }
>
> - for (i = 0; i < NPCM7XX_FAN_MAX_CHN_NUM; i++) {
> + for (i = 0; i < data->info->fan_max_ch; i++) {
> if (data->fan_present[i]) {
> /* fan timer initialization */
> data->fan_timer.expires = jiffies +
> @@ -1015,7 +1125,8 @@ static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
> }
>
> static const struct of_device_id of_pwm_fan_match_table[] = {
> - { .compatible = "nuvoton,npcm750-pwm-fan", },
> + { .compatible = "nuvoton,npcm750-pwm-fan", .data = &npxm7xx_hwmon_info},
> + { .compatible = "nuvoton,npcm845-pwm-fan", .data = &npxm8xx_hwmon_info},
> {},
> };
> MODULE_DEVICE_TABLE(of, of_pwm_fan_match_table);
Powered by blists - more mailing lists