lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 25 Oct 2023 21:10:15 +0100
From:   Simon Horman <horms@...nel.org>
To:     Oleksij Rempel <o.rempel@...gutronix.de>
Cc:     "David S. Miller" <davem@...emloft.net>,
        Andrew Lunn <andrew@...n.ch>,
        Eric Dumazet <edumazet@...gle.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni <pabeni@...hat.com>,
        Vladimir Oltean <olteanv@...il.com>,
        Woojung Huh <woojung.huh@...rochip.com>,
        Arun Ramadoss <arun.ramadoss@...rochip.com>,
        Conor Dooley <conor+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Florian Fainelli <florian.fainelli@...adcom.com>,
        kernel@...gutronix.de, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org, UNGLinuxDriver@...rochip.com,
        "Russell King (Oracle)" <linux@...linux.org.uk>,
        devicetree@...r.kernel.org
Subject: Re: [PATCH net-next v7 4/9] net: dsa: microchip: ksz9477: add Wake
 on LAN support

On Mon, Oct 23, 2023 at 11:33:38AM +0200, Oleksij Rempel wrote:
> Add WoL support for KSZ9477 family of switches. This code was tested on
> KSZ8563 chip.
> 
> KSZ9477 family of switches supports multiple PHY events:
> - wake on Link Up
> - wake on Energy Detect.
> Since current UAPI can't differentiate between this PHY events, map all
> of them to WAKE_PHY.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> Reviewed-by: Andrew Lunn <andrew@...n.ch>
> Reviewed-by: Florian Fainelli <florian.fainelli@...adcom.com>
> ---
>  drivers/net/dsa/microchip/ksz9477.c    | 100 +++++++++++++++++++++++++
>  drivers/net/dsa/microchip/ksz9477.h    |   4 +
>  drivers/net/dsa/microchip/ksz_common.c |  24 ++++++
>  drivers/net/dsa/microchip/ksz_common.h |   4 +
>  4 files changed, 132 insertions(+)
> 
> diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
> index cde8ef33d029..036dfaddb32a 100644
> --- a/drivers/net/dsa/microchip/ksz9477.c
> +++ b/drivers/net/dsa/microchip/ksz9477.c
> @@ -56,6 +56,103 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
>  				  REG_SW_MTU_MASK, frame_size);
>  }
>  
> +/**
> + * ksz9477_handle_wake_reason - Handle wake reason on a specified port.
> + * @dev: The device structure.
> + * @port: The port number.
> + *
> + * This function reads the PME (Power Management Event) status register of a
> + * specified port to determine the wake reason. If there is no wake event, it
> + * returns early. Otherwise, it logs the wake reason which could be due to a
> + * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register
> + * is then cleared to acknowledge the handling of the wake event.
> + *
> + * Return: 0 on success, or an error code on failure.
> + */
> +static int ksz9477_handle_wake_reason(struct ksz_device *dev, int port)
> +{
> +	u8 pme_status;
> +	int ret;
> +
> +	ret = ksz_pread8(dev, port, REG_PORT_PME_STATUS, &pme_status);
> +	if (ret)
> +		return ret;
> +
> +	if (!pme_status)
> +		return 0;
> +
> +	dev_dbg(dev->dev, "Wake event on port %d due to:%s%s\n", port,
> +		pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "",
> +		pme_status & PME_WOL_ENERGY ? " \"Enery detect\"" : "");

nit: Energy

> +
> +	return ksz_pwrite8(dev, port, REG_PORT_PME_STATUS, pme_status);
> +}

...

Powered by blists - more mailing lists