[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231025074128.GA3648@thinkpad>
Date: Wed, 25 Oct 2023 13:11:28 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Ziqi Chen <quic_ziqichen@...cinc.com>
Cc: quic_asutoshd@...cinc.com, quic_cang@...cinc.com,
bvanassche@....org, mani@...nel.org, beanhuo@...ron.com,
avri.altman@....com, junwoo80.lee@...sung.com,
martin.petersen@...cle.com, quic_nguyenb@...cinc.com,
quic_nitirawa@...cinc.com, quic_rampraka@...cinc.com,
linux-scsi@...r.kernel.org, Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"open list:ARM/QUALCOMM SUPPORT" <linux-arm-msm@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] scsi: ufs: qcom: move ufs_qcom_host_reset() to
ufs_qcom_device_reset()
On Tue, Oct 24, 2023 at 07:10:15PM +0800, Ziqi Chen wrote:
> During PISI test, we found the issue that host Tx still bursting after
What is PISI test?
> H/W reset. Move ufs_qcom_host_reset() to ufs_qcom_device_reset() and
> reset host before device reset to stop tx burst.
>
device_reset() callback is supposed to reset only the device and not the host.
So NACK for this patch.
- Mani
> Signed-off-by: Ziqi Chen <quic_ziqichen@...cinc.com>
> ---
> drivers/ufs/host/ufs-qcom.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 96cb8b5..43163d3 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -445,12 +445,6 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
> struct phy *phy = host->generic_phy;
> int ret;
>
> - /* Reset UFS Host Controller and PHY */
> - ret = ufs_qcom_host_reset(hba);
> - if (ret)
> - dev_warn(hba->dev, "%s: host reset returned %d\n",
> - __func__, ret);
> -
> /* phy initialization - calibrate the phy */
> ret = phy_init(phy);
> if (ret) {
> @@ -1709,6 +1703,13 @@ static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
> static int ufs_qcom_device_reset(struct ufs_hba *hba)
> {
> struct ufs_qcom_host *host = ufshcd_get_variant(hba);
> + int ret = 0;
> +
> + /* Reset UFS Host Controller and PHY */
> + ret = ufs_qcom_host_reset(hba);
> + if (ret)
> + dev_warn(hba->dev, "%s: host reset returned %d\n",
> + __func__, ret);
>
> /* reset gpio is optional */
> if (!host->device_reset)
> --
> 2.7.4
>
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists