| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231025-topic-sm8650-upstream-dt-v1-6-a821712af62f@linaro.org>
Date: Wed, 25 Oct 2023 09:47:46 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Neil Armstrong <neil.armstrong@...aro.org>
Subject: [PATCH RFC 6/8] arm64: dts: qcom: sm8650: add interconnect
dependent device nodes
Add Hardware nodes that depends on an interconnect property to
be valid.
The includes:
- all QUP i2s/spi nodes
- PCIe
- UFS
- SDHCI
- Display
- HWMON
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
arch/arm64/boot/dts/qcom/sm8650.dtsi | 3348 +++++++++++++++++++++++++++++++---
1 file changed, 3083 insertions(+), 265 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index bbebe15437aa..0b5ff539959a 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -11,6 +11,7 @@
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
@@ -57,6 +58,11 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
clock-mult = <1>;
clock-div = <2>;
};
+
+ pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
};
cpus {
@@ -363,9 +369,22 @@ CLUSTER_SLEEP_1: cluster-sleep-1 {
firmware {
scm: scm {
compatible = "qcom,scm-sm8650", "qcom,scm";
+ interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
};
};
+ clk_virt: interconnect-0 {
+ compatible = "qcom,sm8650-clk-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ mc_virt: interconnect-1 {
+ compatible = "qcom,sm8650-mc-virt";
+ #interconnect-cells = <2>;
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
memory@...00000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
@@ -626,6 +645,95 @@ llcc_lpi_mem: llcc-lpi@...00000 {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <443>, <429>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <94>, <432>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <435>, <428>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ smp2p_modem_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_modem_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
@@ -641,13 +749,13 @@ gcc: clock-controller@...000 {
clocks = <&bi_tcxo_div2>,
<&bi_tcxo_ao_div2>,
<&sleep_clk>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>;
+ <&pcie0_phy>,
+ <&pcie1_phy>,
+ <&pcie_1_phy_aux_clk>,
+ <&ufs_mem_phy 0>,
+ <&ufs_mem_phy 1>,
+ <&ufs_mem_phy 2>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -712,240 +820,2195 @@ qupv3_id_1: geniqup@...000 {
status = "disabled";
- uart15: serial@...000 {
- compatible = "qcom,geni-debug-uart";
- reg = <0 0x0089c000 0 0x4000>;
+ i2c8: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
- interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
clock-names = "se";
- pinctrl-0 = <&qup_uart15_default>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c8_data_clk>;
pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
status = "disabled";
};
- };
- gpi_dma1: dma-controller@...000 {
- compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
- reg = <0 0x00a00000 0 0x60000>;
+ spi8: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00880000 0 0x4000>;
- interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
- dma-channels = <12>;
- dma-channel-mask = <0xc>;
- #dma-cells = <3>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ clock-names = "se";
- iommus = <&apps_smmu 0xb6 0>;
- dma-coherent;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
- status = "disabled";
- };
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
- rng: rng@...3000 {
- compatible = "qcom,sm8650-trng", "qcom,trng";
- reg = <0 0x010c3000 0 0x1000>;
- };
+ pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+ pinctrl-names = "default";
- ice: crypto@...8000 {
- compatible = "qcom,sm8650-inline-crypto-engine",
- "qcom,inline-crypto-engine";
- reg = <0 0x01d88000 0 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
- };
+ status = "disabled";
+ };
- tcsr_mutex: hwlock@...0000 {
- compatible = "qcom,tcsr-mutex";
- reg = <0 0x01f40000 0 0x20000>;
+ i2c9: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00884000 0 0x4000>;
- #hwlock-cells = <1>;
- };
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
- tcsr: clock-controller@...0000 {
- compatible = "qcom,sm8650-tcsr", "syscon";
- reg = <0 0x01fc0000 0 0xa0000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
- clocks = <&rpmhcc RPMH_CXO_CLK>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
- gpucc: clock-controller@...0000 {
- compatible = "qcom,sm8650-gpucc";
- reg = <0 0x03d90000 0 0xa000>;
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ pinctrl-names = "default";
- clocks = <&bi_tcxo_div2>,
- <&gcc GCC_GPU_GPLL0_CLK_SRC>,
- <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
+ status = "disabled";
+ };
- dispcc: clock-controller@...0000 {
- compatible = "qcom,sm8650-dispcc";
- reg = <0 0x0af00000 0 0x20000>;
+ spi9: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00884000 0 0x4000>;
- clocks = <&bi_tcxo_div2>,
- <&bi_tcxo_ao_div2>,
- <&gcc GCC_DISP_AHB_CLK>,
- <&sleep_clk>,
- <0>, /* dsi0 */
- <0>,
- <0>, /* dsi1 */
- <0>,
- <0>, /* dp0 */
- <0>,
- <0>, /* dp1 */
- <0>,
- <0>, /* dp2 */
- <0>,
- <0>, /* dp3 */
- <0>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&rpmhpd RPMHPD_MMCX>;
- required-opps = <&rpmhpd_opp_low_svs>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ clock-names = "se";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
- status = "disabled";
- };
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
- usb_1_hsphy: phy@...3000 {
- compatible = "qcom,sm8650-snps-eusb2-phy",
- "qcom,sm8550-snps-eusb2-phy";
- reg = <0 0x088e3000 0 0x154>;
+ pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+ pinctrl-names = "default";
- clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
- clock-names = "ref";
+ #address-cells = <1>;
+ #size-cells = <0>;
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ status = "disabled";
+ };
- #phy-cells = <0>;
+ i2c10: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
- status = "disabled";
- };
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
- usb_dp_qmpphy: phy@...8000 {
- compatible = "qcom,sm8650-qmp-usb3-dp-phy";
- reg = <0 0x088e8000 0 0x3000>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
- clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "aux",
- "ref",
- "com_aux",
- "usb3_pipe";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
- resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
- <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
- reset-names = "phy",
- "common";
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
- power-domains = <&gcc USB3_PHY_GDSC>;
+ pinctrl-0 = <&qup_i2c10_data_clk>;
+ pinctrl-names = "default";
- #clock-cells = <1>;
- #phy-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- status = "disabled";
- };
+ status = "disabled";
+ };
- usb_1: usb@...8800 {
- compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
- reg = <0 0x0a6f8800 0 0x400>;
+ spi10: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00888000 0 0x4000>;
- interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 15 IRQ_TYPE_EDGE_RISING>,
- <&pdc 14 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "hs_phy_irq",
- "ss_phy_irq",
- "dm_hs_phy_irq",
- "dp_hs_phy_irq";
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>,
- <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
- <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&tcsr TCSR_USB3_CLKREF_EN>;
- clock-names = "cfg_noc",
- "core",
- "iface",
- "sleep",
- "mock_utmi",
- "xo";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ clock-names = "se";
- assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_PRIM_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <200000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
- resets = <&gcc GCC_USB30_PRIM_BCR>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
- power-domains = <&gcc USB30_PRIM_GDSC>;
- required-opps = <&rpmhpd_opp_nom>;
+ pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+ pinctrl-names = "default";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <0>;
- status = "disabled";
+ status = "disabled";
+ };
- usb_1_dwc3: usb@...0000 {
- compatible = "snps,dwc3";
- reg = <0 0x0a600000 0 0xcd00>;
+ i2c11: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x0088c000 0 0x4000>;
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
- iommus = <&apps_smmu 0x40 0>;
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
- phys = <&usb_1_hsphy>,
- <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
- phy-names = "usb2-phy",
- "usb3-phy";
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
- snps,hird-threshold = /bits/ 8 <0x0>;
- snps,usb2-gadget-lpm-disable;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- snps,dis-u1-entry-quirk;
- snps,dis-u2-entry-quirk;
- snps,is-utmi-l1-suspend;
- snps,usb3_lpm_capable;
- snps,usb2-lpm-disable;
- snps,has-lpm-erratum;
- tx-fifo-resize;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
- dma-coherent;
+ pinctrl-0 = <&qup_i2c11_data_clk>;
+ pinctrl-names = "default";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ status = "disabled";
+ };
- usb_1_dwc3_hs: endpoint {
+ spi11: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c12: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c12_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi12: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c13: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c13_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi13: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart14: serial@...000 {
+ compatible = "qcom,geni-uart";
+ reg = <0 0x00898000 0 0x4000>;
+
+ interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+
+ uart15: serial@...000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0 0x0089c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&qup_uart15_default>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+ };
+
+ i2c_master_hub_0: geniqup@...000 {
+ compatible = "qcom,geni-se-i2c-master-hub";
+ reg = <0 0x009c0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
+ clock-names = "s-ahb";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c_hub_0: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00980000 0 0x4000>;
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c0_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_1: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00984000 0 0x4000>;
+
+ interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c1_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_2: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00988000 0 0x4000>;
+
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c2_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_3: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x0098c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c3_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_4: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00990000 0 0x4000>;
+
+ interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c4_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_5: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00994000 0 0x4000>;
+
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c5_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_6: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x00998000 0 0x4000>;
+
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c6_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_7: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x0099c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c7_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_8: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x009a0000 0 0x4000>;
+
+ interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c8_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c_hub_9: i2c@...000 {
+ compatible = "qcom,geni-i2c-master-hub";
+ reg = <0 0x009a4000 0 0x4000>;
+
+ interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
+ <&gcc GCC_QUPV3_I2C_CORE_CLK>;
+ clock-names = "se",
+ "core";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_I2C 0>;
+ interconnect-names = "qup-core",
+ "qup-config";
+
+ pinctrl-0 = <&hub_i2c9_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ gpi_dma1: dma-controller@...000 {
+ compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
+
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+ dma-channels = <12>;
+ dma-channel-mask = <0xc>;
+ #dma-cells = <3>;
+
+ iommus = <&apps_smmu 0xb6 0>;
+ dma-coherent;
+
+ status = "disabled";
+ };
+
+ qupv3_id_0: geniqup@...000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0 0x00ac0000 0 0x2000>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+ interconnect-names = "qup-core";
+
+ iommus = <&apps_smmu 0xa3 0>;
+
+ dma-coherent;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ i2c0: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c0_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi0: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a80000 0 0x4000>;
+
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi1: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a84000 0 0x4000>;
+
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi2: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a88000 0 0x4000>;
+
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi3: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a8c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi4: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a90000 0 0x4000>;
+
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c5: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi5: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a94000 0 0x4000>;
+
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c6: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi6: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a98000 0 0x4000>;
+
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c7: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_i2c7_data_clk>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi7: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00a9c000 0 0x4000>;
+
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+ clock-names = "se";
+
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+ <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+
+ pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ cnoc_main: interconnect@...0000 {
+ compatible = "qcom,sm8650-cnoc-main";
+ reg = <0 0x01500000 0 0x14080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ config_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-config-noc";
+ reg = <0 0x01600000 0 0x6200>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ system_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-system-noc";
+ reg = <0 0x01680000 0 0x1d080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ pcie_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-pcie-anoc";
+ reg = <0 0x016c0000 0 0x12200>;
+
+ clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre1_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-aggre1-noc";
+ reg = <0 0x016e0000 0 0x16400>;
+
+ clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ aggre2_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-aggre2-noc";
+ reg = <0 0x01700000 0 0x1e400>;
+
+ clocks = <&rpmhcc RPMH_IPA_CLK>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ mmss_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-mmss-noc";
+ reg = <0 0x01780000 0 0x5b800>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ rng: rng@...3000 {
+ compatible = "qcom,sm8650-trng", "qcom,trng";
+ reg = <0 0x010c3000 0 0x1000>;
+ };
+
+ pcie0: pci@...0000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "noc_aggr",
+ "cnoc_sf_axi";
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ iommu-map = <0 &apps_smmu 0x1400 0x1>,
+ <0x100 &apps_smmu 0x1401 0x1>;
+
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ #interrupt-cells = <1>;
+
+ linux,pci-domain = <0>;
+ num-lanes = <2>;
+ bus-range = <0 0xff>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
+ <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
+
+ dma-coherent;
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@...6000 {
+ compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c06000 0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&tcsr TCSR_PCIE_0_CLKREF_EN>,
+ <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ power-domains = <&gcc PCIE_0_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie0_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ pcie1: pci@...8000 {
+ device_type = "pci";
+ compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf",
+ "dbi",
+ "elbi",
+ "atu",
+ "config";
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+
+ clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+ <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "noc_aggr",
+ "cnoc_sf_axi";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>,
+ <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+ reset-names = "pci",
+ "link_down";
+
+ interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_1 0>;
+ interconnect-names = "pcie-mem",
+ "cpu-pcie";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+
+ iommu-map = <0 &apps_smmu 0x1480 0x1>,
+ <0x100 &apps_smmu 0x1481 0x1>;
+
+ interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ #interrupt-cells = <1>;
+
+ linux,pci-domain = <1>;
+ num-lanes = <2>;
+ bus-range = <0 0xff>;
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+
+ dma-coherent;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
+ <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
+
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@...e000 {
+ compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
+ reg = <0 0x01c0e000 0 0x2000>;
+
+ clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&tcsr TCSR_PCIE_1_CLKREF_EN>,
+ <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "rchng",
+ "pipe";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>,
+ <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
+ reset-names = "phy",
+ "phy_nocsr";
+
+ power-domains = <&gcc PCIE_1_PHY_GDSC>;
+
+ #clock-cells = <0>;
+ clock-output-names = "pcie1_pipe_clk";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ cryptobam: dma-controller@...4000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0 0x01dc4000 0 0x28000>;
+
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+
+ #dma-cells = <1>;
+
+ iommus = <&apps_smmu 0x480 0>,
+ <&apps_smmu 0x481 0>;
+
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ };
+
+ crypto: crypto@...a000 {
+ compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+ reg = <0 0x01dfa000 0 0x6000>;
+
+ interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "memory";
+
+ dmas = <&cryptobam 4>, <&cryptobam 5>;
+ dma-names = "rx", "tx";
+
+ iommus = <&apps_smmu 0x480 0>,
+ <&apps_smmu 0x481 0>;
+ };
+
+ ufs_mem_phy: phy@...0000 {
+ compatible = "qcom,sm8650-qmp-ufs-phy";
+ reg = <0 0x01d80000 0 0x2000>;
+
+ clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ clock-names = "ref",
+ "ref_aux";
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ power-domains = <&gcc UFS_MEM_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_hc: ufs@...4000 {
+ compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>;
+
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk";
+ freq-table-hz = <100000000 403000000>,
+ <0 0>,
+ <0 0>,
+ <100000000 403000000>,
+ <100000000 403000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
+ interconnect-names = "ufs-ddr",
+ "cpu-ufs";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ iommus = <&apps_smmu 0x60 0>;
+
+ lanes-per-direction = <2>;
+ qcom,ice = <&ice>;
+
+ phys = <&ufs_mem_phy>;
+ phy-names = "ufsphy";
+
+ #reset-cells = <1>;
+
+ status = "disabled";
+ };
+
+ ice: crypto@...8000 {
+ compatible = "qcom,sm8650-inline-crypto-engine",
+ "qcom,inline-crypto-engine";
+ reg = <0 0x01d88000 0 0x8000>;
+
+ clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ };
+
+ tcsr_mutex: hwlock@...0000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0 0x01f40000 0 0x20000>;
+
+ #hwlock-cells = <1>;
+ };
+
+ tcsr: clock-controller@...0000 {
+ compatible = "qcom,sm8650-tcsr", "syscon";
+ reg = <0 0x01fc0000 0 0xa0000>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ gpucc: clock-controller@...0000 {
+ compatible = "qcom,sm8650-gpucc";
+ reg = <0 0x03d90000 0 0xa000>;
+
+ clocks = <&bi_tcxo_div2>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ remoteproc_mpss: remoteproc@...0000 {
+ compatible = "qcom,sm8650-mpss-pas";
+ reg = <0 0x04080000 0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interconnects = <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MSS>;
+ power-domain-names = "cx",
+ "mss";
+
+ memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
+ <&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_modem_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ qcom,remote-pid = <1>;
+
+ label = "mpss";
+ };
+ };
+
+ lpass_lpiaon_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-lpass-lpiaon-noc";
+ reg = <0 0x07400000 0 0x19080>;
+
+ #interconnect-cells = <2>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ lpass_lpicx_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-lpass-lpicx-noc";
+ reg = <0 0x07430000 0 0x3a200>;
+
+ #interconnect-cells = <2>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ lpass_ag_noc: interconnect@...0000 {
+ compatible = "qcom,sm8650-lpass-ag-noc";
+ reg = <0 0x07e40000 0 0xe080>;
+
+ #interconnect-cells = <2>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+ };
+
+ sdhc_2: mmc@...4000 {
+ compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x08804000 0 0x1000>;
+
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq",
+ "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "core",
+ "xo";
+
+ interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
+ interconnect-names = "sdhc-ddr",
+ "cpu-sdhc";
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ iommus = <&apps_smmu 0x540 0>;
+
+ bus-width = <4>;
+
+ /* Forbid SDR104/SDR50 - broken hw! */
+ sdhci-caps-mask = <0x3 0>;
+
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+
+ dma-coherent;
+
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss: display-subsystem@...0000 {
+ compatible = "qcom,sm8650-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+ <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem",
+ "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@...1000 {
+ compatible = "qcom,sm8650-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupts-extended = <&mdss 0>;
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@...4000 {
+ compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+
+ mdss_dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@...5000 {
+ compatible = "qcom,sm8650-dsi-phy-4nm";
+ reg = <0 0x0ae95000 0 0x200>,
+ <0 0x0ae95200 0 0x280>,
+ <0 0x0ae95500 0 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ mdss_dsi1: dsi@...6000 {
+ compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@...7000 {
+ compatible = "qcom,sm8650-dsi-phy-4nm";
+ reg = <0 0x0ae97000 0 0x200>,
+ <0 0x0ae97200 0 0x280>,
+ <0 0x0ae97500 0 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@...0000 {
+ compatible = "qcom,sm8650-dispcc";
+ reg = <0 0x0af00000 0 0x20000>;
+
+ clocks = <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&sleep_clk>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <0>, /* dp0 */
+ <0>,
+ <0>, /* dp1 */
+ <0>,
+ <0>, /* dp2 */
+ <0>,
+ <0>, /* dp3 */
+ <0>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ status = "disabled";
+ };
+
+ usb_1_hsphy: phy@...3000 {
+ compatible = "qcom,sm8650-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0 0x088e3000 0 0x154>;
+
+ clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_dp_qmpphy: phy@...8000 {
+ compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+ reg = <0 0x088e8000 0 0x3000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "common";
+
+ power-domains = <&gcc USB3_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+ };
+
+ usb_1: usb@...8800 {
+ compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 14 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dm_hs_phy_irq",
+ "dp_hs_phy_irq";
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&tcsr TCSR_USB3_CLKREF_EN>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0x40 0>;
+
+ phys = <&usb_1_hsphy>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+
+ dma-coherent;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
};
};
@@ -969,115 +3032,602 @@ pdc: interrupt-controller@...0000 {
<125 63 1>, <126 716 12>,
<138 251 5>, <143 244 4>;
- #interrupt-cells = <2>;
- interrupt-controller;
- };
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ tsens0: thermal-sensor@...8000 {
+ compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c228000 0 0x1000>, /* TM */
+ <0 0x0c222000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <15>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@...9000 {
+ compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c229000 0 0x1000>, /* TM */
+ <0 0x0c223000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <16>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens2: thermal-sensor@...a000 {
+ compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c22a000 0 0x1000>, /* TM */
+ <0 0x0c224000 0 0x1000>; /* SROT */
+
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+
+ #qcom,sensors = <13>;
+
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_qmp: power-management@...0000 {
+ compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0 0x0c300000 0 0x400>;
+
+ interrupt-parent = <&ipcc>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
+ sram@...0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
+ spmi_bus: spmi@...0000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0 0x0c400000 0 0x3000>,
+ <0 0x0c500000 0 0x4000000>,
+ <0 0x0c440000 0 0x80000>,
+ <0 0x0c4c0000 0 0x20000>,
+ <0 0x0c42d000 0 0x4000>;
+ reg-names = "core",
+ "chnls",
+ "obsrvr",
+ "intr",
+ "cnfg";
+
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "periph_irq";
+
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ qcom,bus-id = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <4>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ tlmm: pinctrl@...0000 {
+ compatible = "qcom,sm8650-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-ranges = <&tlmm 0 0 211>;
+
+ wakeup-parent = <&pdc>;
+
+ hub_i2c0_data_clk: hub-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio64", "gpio65";
+ function = "i2chub0_se0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c1_data_clk: hub-i2c1-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio66", "gpio67";
+ function = "i2chub0_se1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c2_data_clk: hub-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio68", "gpio69";
+ function = "i2chub0_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c3_data_clk: hub-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio70", "gpio71";
+ function = "i2chub0_se3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c4_data_clk: hub-i2c4-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio72", "gpio73";
+ function = "i2chub0_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c5_data_clk: hub-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio74", "gpio75";
+ function = "i2chub0_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c6_data_clk: hub-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio76", "gpio77";
+ function = "i2chub0_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c7_data_clk: hub-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio78", "gpio79";
+ function = "i2chub0_se7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c8_data_clk: hub-i2c8-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio206", "gpio207";
+ function = "i2chub0_se8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ hub_i2c9_data_clk: hub-i2c9-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio80", "gpio81";
+ function = "i2chub0_se9";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ pcie0_default_state: pcie0-default-state {
+ perst-pins {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio95";
+ function = "pcie0_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ perst-pins {
+ pins = "gpio97";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio98";
+ function = "pcie1_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio99";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ qup_i2c0_data_clk: qup-i2c0-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio32", "gpio33";
+ function = "qup1_se0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio36", "gpio37";
+ function = "qup1_se1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio40", "gpio41";
+ function = "qup1_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio44", "gpio45";
+ function = "qup1_se3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio52", "gpio53";
+ function = "qup1_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio56", "gpio57";
+ function = "qup1_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio60", "gpio61";
+ function = "qup1_se7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c8_data_clk: qup-i2c8-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio0", "gpio1";
+ function = "qup2_se0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio4", "gpio5";
+ function = "qup2_se1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c10_data_clk: qup-i2c10-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio8", "gpio9";
+ function = "qup2_se2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c11_data_clk: qup-i2c11-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio12", "gpio13";
+ function = "qup2_se3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c12_data_clk: qup-i2c12-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio16", "gpio17";
+ function = "qup2_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c13_data_clk: qup-i2c13-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio20", "gpio21";
+ function = "qup2_se5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c14_data_clk: qup-i2c14-data-clk-state {
+ /* SDA, SCL */
+ pins = "gpio24", "gpio25";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_spi0_cs: qup-spi0-cs-state {
+ pins = "gpio35";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi0_data_clk: qup-spi0-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio32", "gpio33", "gpio34";
+ function = "qup1_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_cs: qup-spi1-cs-state {
+ pins = "gpio39";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi1_data_clk: qup-spi1-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio36", "gpio37", "gpio38";
+ function = "qup1_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
- tsens0: thermal-sensor@...8000 {
- compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
- reg = <0 0x0c228000 0 0x1000>, /* TM */
- <0 0x0c222000 0 0x1000>; /* SROT */
+ qup_spi2_cs: qup-spi2-cs-state {
+ pins = "gpio43";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
- interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow",
- "critical";
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio40", "gpio41", "gpio42";
+ function = "qup1_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
- #qcom,sensors = <15>;
+ qup_spi3_cs: qup-spi3-cs-state {
+ pins = "gpio47";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
- #thermal-sensor-cells = <1>;
- };
+ qup_spi3_data_clk: qup-spi3-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio44", "gpio45", "gpio46";
+ function = "qup1_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
- tsens1: thermal-sensor@...9000 {
- compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
- reg = <0 0x0c229000 0 0x1000>, /* TM */
- <0 0x0c223000 0 0x1000>; /* SROT */
+ qup_spi4_cs: qup-spi4-cs-state {
+ pins = "gpio51";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
- interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow",
- "critical";
+ qup_spi4_data_clk: qup-spi4-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio48", "gpio49", "gpio50";
+ function = "qup1_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
- #qcom,sensors = <16>;
+ qup_spi5_cs: qup-spi5-cs-state {
+ pins = "gpio55";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
- #thermal-sensor-cells = <1>;
- };
+ qup_spi5_data_clk: qup-spi5-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio52", "gpio53", "gpio54";
+ function = "qup1_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
- tsens2: thermal-sensor@...a000 {
- compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
- reg = <0 0x0c22a000 0 0x1000>, /* TM */
- <0 0x0c224000 0 0x1000>; /* SROT */
+ qup_spi6_cs: qup-spi6-cs-state {
+ pins = "gpio59";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
- interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow",
- "critical";
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio56", "gpio57", "gpio58";
+ function = "qup1_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
- #qcom,sensors = <13>;
+ qup_spi7_cs: qup-spi7-cs-state {
+ pins = "gpio63";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
- #thermal-sensor-cells = <1>;
- };
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio60", "gpio61", "gpio62";
+ function = "qup1_se7";
+ drive-strength = <6>;
+ bias-disable;
+ };
- aoss_qmp: power-management@...0000 {
- compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
- reg = <0 0x0c300000 0 0x400>;
+ qup_spi8_cs: qup-spi8-cs-state {
+ pins = "gpio3";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
- interrupt-parent = <&ipcc>;
- interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
+ qup_spi8_data_clk: qup-spi8-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio0", "gpio1", "gpio2";
+ function = "qup2_se0";
+ drive-strength = <6>;
+ bias-disable;
+ };
- mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ qup_spi9_cs: qup-spi9-cs-state {
+ pins = "gpio7";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
- #clock-cells = <0>;
- };
+ qup_spi9_data_clk: qup-spi9-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio4", "gpio5", "gpio6";
+ function = "qup2_se1";
+ drive-strength = <6>;
+ bias-disable;
+ };
- sram@...0000 {
- compatible = "qcom,rpmh-stats";
- reg = <0 0x0c3f0000 0 0x400>;
- };
+ qup_spi10_cs: qup-spi10-cs-state {
+ pins = "gpio11";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
- spmi_bus: spmi@...0000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0 0x0c400000 0 0x3000>,
- <0 0x0c500000 0 0x4000000>,
- <0 0x0c440000 0 0x80000>,
- <0 0x0c4c0000 0 0x20000>,
- <0 0x0c42d000 0 0x4000>;
- reg-names = "core",
- "chnls",
- "obsrvr",
- "intr",
- "cnfg";
+ qup_spi10_data_clk: qup-spi10-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "qup2_se2";
+ drive-strength = <6>;
+ bias-disable;
+ };
- interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "periph_irq";
+ qup_spi11_cs: qup-spi11-cs-state {
+ pins = "gpio15";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
- qcom,ee = <0>;
- qcom,channel = <0>;
- qcom,bus-id = <0>;
+ qup_spi11_data_clk: qup-spi11-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio12", "gpio13", "gpio14";
+ function = "qup2_se3";
+ drive-strength = <6>;
+ bias-disable;
+ };
- interrupt-controller;
- #interrupt-cells = <4>;
+ qup_spi12_cs: qup-spi12-cs-state {
+ pins = "gpio19";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
- #address-cells = <2>;
- #size-cells = <0>;
- };
+ qup_spi12_data_clk: qup-spi12-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio16", "gpio17", "gpio18";
+ function = "qup2_se4";
+ drive-strength = <6>;
+ bias-disable;
+ };
- tlmm: pinctrl@...0000 {
- compatible = "qcom,sm8650-tlmm";
- reg = <0 0x0f100000 0 0x300000>;
+ qup_spi13_cs: qup-spi13-cs-state {
+ pins = "gpio23";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ qup_spi13_data_clk: qup-spi13-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio20", "gpio21", "gpio22";
+ function = "qup2_se5";
+ drive-strength = <6>;
+ bias-disable;
+ };
- gpio-controller;
- #gpio-cells = <2>;
+ qup_spi14_cs: qup-spi14-cs-state {
+ pins = "gpio27";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
- interrupt-controller;
- #interrupt-cells = <2>;
+ qup_spi14_data_clk: qup-spi14-data-clk-state {
+ /* MISO, MOSI, CLK */
+ pins = "gpio24", "gpio25", "gpio26";
+ function = "qup2_se6";
+ drive-strength = <6>;
+ bias-disable;
+ };
- gpio-ranges = <&tlmm 0 0 211>;
+ qup_uart14_default: qup-uart14-default-state {
+ /* TX, RX */
+ pins = "gpio26", "gpio27";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
- wakeup-parent = <&pdc>;
+ qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+ /* CTS, RTS */
+ pins = "gpio24", "gpio25";
+ function = "qup2_se6";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
qup_uart15_default: qup-uart15-default-state {
/* TX, RX */
@@ -1086,6 +3636,46 @@ qup_uart15_default: qup-uart15-default-state {
drive-strength = <2>;
bias-disable;
};
+
+ sdc2_sleep: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_default: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
};
apps_smmu: iommu@...00000 {
@@ -1437,6 +4027,105 @@ cpufreq_hw: cpufreq@...91000 {
#clock-cells = <1>;
};
+ pmu@...91000 {
+ compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
+ reg = <0 0x24091000 0 0x1000>;
+
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>;
+
+ operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+ llcc_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <2086000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <2929000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <5931000>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <6515000>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <7980000>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <10437000>;
+ };
+
+ opp-6 {
+ opp-peak-kBps = <12157000>;
+ };
+
+ opp-7 {
+ opp-peak-kBps = <14060000>;
+ };
+
+ opp-8 {
+ opp-peak-kBps = <16113000>;
+ };
+ };
+ };
+
+ pmu@...b7400 {
+ compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
+ reg = <0 0x240b7400 0 0x600>;
+
+ interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>;
+
+ operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+ cpu_bwmon_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-0 {
+ opp-peak-kBps = <4577000>;
+ };
+
+ opp-1 {
+ opp-peak-kBps = <7110000>;
+ };
+
+ opp-2 {
+ opp-peak-kBps = <9155000>;
+ };
+
+ opp-3 {
+ opp-peak-kBps = <12298000>;
+ };
+
+ opp-4 {
+ opp-peak-kBps = <14236000>;
+ };
+
+ opp-5 {
+ opp-peak-kBps = <16265000>;
+ };
+ };
+ };
+
+ gem_noc: interconnect@...00000 {
+ compatible = "qcom,sm8650-gem-noc";
+ reg = <0 0x24100000 0 0xc5080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
system-cache-controller@...00000 {
compatible = "qcom,sm8650-llcc";
reg = <0 0x25000000 0 0x200000>,
@@ -1452,6 +4141,135 @@ system-cache-controller@...00000 {
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ remoteproc_adsp: remoteproc@...00000 {
+ compatible = "qcom,sm8650-adsp-pas";
+ reg = <0 0x30000000 0 0x100>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx",
+ "lmx";
+
+ memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ remoteproc_adsp_glink: glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ qcom,remote-pid = <2>;
+
+ label = "lpass";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+ label = "adsp";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
+ nsp_noc: interconnect@...c0000 {
+ compatible = "qcom,sm8650-nsp-noc";
+ reg = <0 0x320c0000 0 0xf080>;
+
+ qcom,bcm-voters = <&apps_bcm_voter>;
+
+ #interconnect-cells = <2>;
+ };
+
+ remoteproc_cdsp: remoteproc@...00000 {
+ compatible = "qcom,sm8650-cdsp-pas";
+ reg = <0 0x32300000 0 0x1400000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP>;
+ power-domain-names = "cx",
+ "mxc",
+ "nsp";
+
+ memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ qcom,remote-pid = <5>;
+
+ label = "cdsp";
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+
+ label = "cdsp";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
};
thermal-zones {
--
2.34.1
Powered by blists - more mailing lists