[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAA8EJprqeVr=28uDJ6u2_JgHFqzr4qB2DpdPvUc=Xf-q2g-TBg@mail.gmail.com>
Date: Wed, 25 Oct 2023 12:03:46 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Neil Armstrong <neil.armstrong@...aro.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFC 3/8] arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable
On Wed, 25 Oct 2023 at 11:00, Neil Armstrong <neil.armstrong@...aro.org> wrote:
>
> The pm8550ve can be found with a different SID on SM8650 platforms,
> make it configurable.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/pm8550ve.dtsi | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
> index c47646a467be..fbd8a386cef2 100644
> --- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
> @@ -6,6 +6,11 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/spmi/spmi.h>
>
> +/* (Sadly) this PMIC can be configured to be at different SIDs */
> +#ifndef PMK8550VE_SID
> + #define PMK8550VE_SID 5
> +#endif
Please drop the #ifndef wrapping and move the define to all files
including this dtsi.
> +
> / {
> thermal-zones {
> pm8550ve-thermal {
> @@ -33,16 +38,16 @@ trip1 {
>
>
> &spmi_bus {
> - pm8550ve: pmic@5 {
> + pm8550ve: pmic@...8550VE_SID {
> compatible = "qcom,pm8550", "qcom,spmi-pmic";
> - reg = <0x5 SPMI_USID>;
> + reg = <PMK8550VE_SID SPMI_USID>;
> #address-cells = <1>;
> #size-cells = <0>;
>
> pm8550ve_temp_alarm: temp-alarm@a00 {
> compatible = "qcom,spmi-temp-alarm";
> reg = <0xa00>;
> - interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
> #thermal-sensor-cells = <0>;
> };
>
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists