lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c98a3141-13a2-4cb3-bbd0-74ff63446183@linaro.org>
Date:   Wed, 25 Oct 2023 11:11:27 +0200
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Neil Armstrong <neil.armstrong@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc:     linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFC 7/8] arm64: dts: qcom: sm8650-mtp: add interconnect
 dependent device nodes



On 10/25/23 09:47, Neil Armstrong wrote:
> Now interconnect dependent devices are added in sm8650 DTSI,
> now enable more devices for the Qualcomm SM8650 MTP board:
> - PCIe
> - Display
> - DSPs
> - SDCard
> - UFS
> - USB role switch with PMIC Glink
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
[...]

> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l17b_2p5>;
> +	vcc-max-microamp = <1300000>;
> +	vccq-supply = <&vreg_l1c_1p2>;
> +	vccq-max-microamp = <1200000>;
You should amend these regulators' nodes with loadsetting
and allowed mode properties

Konrad

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ