| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 25 Oct 2023 06:38:09 -0700
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Keith Zhao <keith.zhao@...rfivetech.com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-media@...r.kernel.org, linaro-mm-sig@...ts.linaro.org
Cc: David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Emil Renner Berthing <kernel@...il.dk>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Philipp Zabel <p.zabel@...gutronix.de>,
Sumit Semwal <sumit.semwal@...aro.org>,
christian.koenig@....com, Bjorn Andersson <andersson@...nel.org>,
Heiko Stuebner <heiko@...ech.de>,
Shawn Guo <shawnguo@...nel.org>, Jagan Teki <jagan@...eble.ai>,
Chris Morgan <macromorgan@...mail.com>,
Jack Zhu <jack.zhu@...rfivetech.com>,
Shengyang Chen <shengyang.chen@...rfivetech.com>,
Changhuang Liang <changhuang.liang@...rfivetech.com>
Subject: Re: [PATCH v2 2/6] riscv: dts: starfive: jh7110: add dc controller
and hdmi node
Keith Zhao wrote:
> Add the dc controller and hdmi node for the Starfive JH7110 SoC.
>
> Signed-off-by: Keith Zhao <keith.zhao@...rfivetech.com>
> ---
> .../jh7110-starfive-visionfive-2.dtsi | 91 +++++++++++++++++++
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 41 +++++++++
> 2 files changed, 132 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index de0f40a8b..97909b6d2 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -31,6 +31,25 @@ memory@...00000 {
> reg = <0x0 0x40000000 0x1 0x0>;
> };
>
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* vout applies for space from this CMA
> + * Without this CMA reservation,
> + * vout may not work properly.
> + */
> + linux,cma {
> + compatible = "shared-dma-pool";
> + reusable;
> + size = <0x0 0x20000000>;
> + alignment = <0x0 0x1000>;
> + alloc-ranges = <0x0 0x70000000 0x0 0x20000000>;
> + linux,cma-default;
> + };
> + };
> +
> gpio-restart {
> compatible = "gpio-restart";
> gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
> @@ -231,6 +250,41 @@ GPOEN_DISABLE,
> slew-rate = <0>;
> };
> };
> +
> + hdmi_pins: hdmi-0 {
> + hdmi-scl-pins {
> + pinmux = <GPIOMUX(0, GPOUT_SYS_HDMI_DDC_SCL,
> + GPOEN_SYS_HDMI_DDC_SCL,
> + GPI_SYS_HDMI_DDC_SCL)>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + hdmi-sda-pins {
> + pinmux = <GPIOMUX(1, GPOUT_SYS_HDMI_DDC_SDA,
> + GPOEN_SYS_HDMI_DDC_SDA,
> + GPI_SYS_HDMI_DDC_SDA)>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + hdmi-cec-pins {
> + pinmux = <GPIOMUX(14, GPOUT_SYS_HDMI_CEC_SDA,
> + GPOEN_SYS_HDMI_CEC_SDA,
> + GPI_SYS_HDMI_CEC_SDA)>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + hdmi-hpd-pins {
> + pinmux = <GPIOMUX(15, GPOUT_HIGH,
> + GPOEN_ENABLE,
> + GPI_SYS_HDMI_HPD)>;
> + input-enable;
> + bias-disable; /* external pull-up */
> + };
> + };
> +
Please don't break the alphabetical ordering of these nodes.
> };
>
> &uart0 {
> @@ -254,3 +308,40 @@ &U74_3 {
> &U74_4 {
> cpu-supply = <&vdd_cpu>;
> };
> +
> +&voutcrg {
> + status = "okay";
> +};
> +
> +&display {
> + status = "okay";
> +};
> +
> +&hdmi {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hdmi_pins>;
> +
> + hdmi_in: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + hdmi_in_dc: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&dc_out_hdmi>;
> + };
> + };
> +};
> +
> +&dc8200 {
> + status = "okay";
> +
> + dc_out: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dc_out_hdmi: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&hdmi_in_dc>;
> + };
> +
> + };
> +};
Some goes for these node references. The order is /-node, clocks, node refences
sorted alphabetically.
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index 0005fa163..1670452fb 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -282,6 +282,11 @@ tdm_ext: tdm-ext-clock {
> #clock-cells = <0>;
> };
>
> + display: display-subsystem {
> + compatible = "starfive,display-subsystem";
> + ports = <&dc_out>;
> + };
> +
> soc {
> compatible = "simple-bus";
> interrupt-parent = <&plic>;
> @@ -613,5 +618,41 @@ voutcrg: clock-controller@...c0000 {
> #reset-cells = <1>;
> power-domains = <&pwrc JH7110_PD_VOUT>;
> };
> +
> + dc8200: lcd-controller@...00000 {
> + compatible = "starfive,jh7110-dc8200";
> + reg = <0x0 0x29400000 0x0 0x100>,
> + <0x0 0x29400800 0x0 0x2000>;
> + interrupts = <95>;
> + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_DISP_AXI>,
> + <&voutcrg JH7110_VOUTCLK_DC8200_PIX0>,
> + <&voutcrg JH7110_VOUTCLK_DC8200_PIX1>,
> + <&voutcrg JH7110_VOUTCLK_DC8200_CORE>,
> + <&voutcrg JH7110_VOUTCLK_DC8200_AXI>,
> + <&voutcrg JH7110_VOUTCLK_DC8200_AHB>,
> + <&hdmitx0_pixelclk>,
> + <&voutcrg JH7110_VOUTCLK_DC8200_PIX>;
> + clock-names = "noc_bus", "channel0", "channel1",
> + "dc_core", "axi_core", "ahb",
> + "hdmi_tx", "dc_parent";
> + resets = <&voutcrg JH7110_VOUTRST_DC8200_AXI>,
> + <&voutcrg JH7110_VOUTRST_DC8200_AHB>,
> + <&voutcrg JH7110_VOUTRST_DC8200_CORE>;
> + reset-names = "axi","ahb", "core";
> + };
> +
> + hdmi: hdmi@...90000 {
> + compatible = "starfive,jh7110-inno-hdmi";
> + reg = <0x0 0x29590000 0x0 0x4000>;
> + interrupts = <99>;
> +
> + clocks = <&voutcrg JH7110_VOUTCLK_HDMI_TX_SYS>,
> + <&voutcrg JH7110_VOUTCLK_HDMI_TX_MCLK>,
> + <&voutcrg JH7110_VOUTCLK_HDMI_TX_BCLK>,
> + <&hdmitx0_pixelclk>;
> + clock-names = "sysclk", "mclk", "bclk", "pclk";
> + resets = <&voutcrg JH7110_VOUTRST_HDMI_TX_HDMI>;
> + #sound-dai-cells = <0>;
> + };
These nodes, however, are sorted by their address which you alse break in this
patch :(
> };
> };
> --
> 2.34.1
>
Powered by blists - more mailing lists