| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZTkjpRZlsXekJuLW@u94a>
Date: Wed, 25 Oct 2023 22:18:13 +0800
From: Shung-Hsi Yu <shung-hsi.yu@...e.com>
To: Hao Sun <sunhao.th@...il.com>
Cc: Alexei Starovoitov <ast@...nel.org>,
Daniel Borkmann <daniel@...earbox.net>,
John Fastabend <john.fastabend@...il.com>,
Andrii Nakryiko <andrii@...nel.org>,
Martin KaFai Lau <martin.lau@...ux.dev>,
Song Liu <song@...nel.org>,
Yonghong Song <yonghong.song@...ux.dev>,
KP Singh <kpsingh@...nel.org>,
Stanislav Fomichev <sdf@...gle.com>,
Hao Luo <haoluo@...gle.com>, Jiri Olsa <jolsa@...nel.org>,
bpf <bpf@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: bpf: shift-out-of-bounds in tnum_rshift()
On Wed, Oct 25, 2023 at 10:09:27PM +0800, Shung-Hsi Yu wrote:
> Hi Hao,
>
> On Wed, Oct 25, 2023 at 02:31:02PM +0200, Hao Sun wrote:
> > On Tue, Oct 24, 2023 at 2:40 PM Hao Sun <sunhao.th@...il.com> wrote:
> > >
> > > Hi,
> > >
> > > The following program can trigger a shift-out-of-bounds in
> > > tnum_rshift(), called by scalar32_min_max_rsh():
> > >
> > > 0: (bc) w0.
> = w1
> > > 1: (bf) r2 = r0
> > > 2: (18) r3 = 0xd
> > > 4: (bc) w4 = w0
> > > 5: (bf) r5 = r0
> > > 6: (bf) r7 = r3
> > > 7: (bf) r8 = r4
> > > 8: (2f) r8 *= r5
> > > 9: (cf) r5 s>>= r5
> > > 10: (a6) if w8 < 0xfffffffb goto pc+10
> > > 11: (1f) r7 -= r5
> > > 12: (71) r6 = *(u8 *)(r1 +17)
> > > 13: (5f) r3 &= r8
> > > 14: (74) w2 >>= 30
> > > 15: (1f) r7 -= r5
> > > 16: (5d) if r8 != r6 goto pc+4
> > > 17: (c7) r8 s>>= 5
> > > 18: (cf) r0 s>>= r0
> > > 19: (7f) r0 >>= r0
> > > 20: (7c) w5 >>= w8 # shift-out-bounds here
> > > 21: exit
> > >
> >
> > Here are the c macros for the above program in case anyone needs this:
> >
> > // 0: (bc) w0 = w1
> > BPF_MOV32_REG(BPF_REG_0, BPF_REG_1),
> > // 1: (bf) r2 = r0
> > BPF_MOV64_REG(BPF_REG_2, BPF_REG_0),
> > // 2: (18) r3 = 0xd
> > BPF_LD_IMM64(BPF_REG_3, 0xd),
> > // 4: (bc) w4 = w0
> > BPF_MOV32_REG(BPF_REG_4, BPF_REG_0),
> > // 5: (bf) r5 = r0
> > BPF_MOV64_REG(BPF_REG_5, BPF_REG_0),
> > // 6: (bf) r7 = r3
> > BPF_MOV64_REG(BPF_REG_7, BPF_REG_3),
> > // 7: (bf) r8 = r4
> > BPF_MOV64_REG(BPF_REG_8, BPF_REG_4),
> > // 8: (2f) r8 *= r5
> > BPF_ALU64_REG(BPF_MUL, BPF_REG_8, BPF_REG_5),
> > // 9: (cf) r5 s>>= r5
> > BPF_ALU64_REG(BPF_ARSH, BPF_REG_5, BPF_REG_5),
> > // 10: (a6) if w8 < 0xfffffffb goto pc+10
> > BPF_JMP32_IMM(BPF_JLT, BPF_REG_8, 0xfffffffb, 10),
> > // 11: (1f) r7 -= r5
> > BPF_ALU64_REG(BPF_SUB, BPF_REG_7, BPF_REG_5),
> > // 12: (71) r6 = *(u8 *)(r1 +17)
> > BPF_LDX_MEM(BPF_B, BPF_REG_6, BPF_REG_1, 17),
> > // 13: (5f) r3 &= r8
> > BPF_ALU64_REG(BPF_AND, BPF_REG_3, BPF_REG_8),
> > // 14: (74) w2 >>= 30
> > BPF_ALU32_IMM(BPF_RSH, BPF_REG_2, 30),
> > // 15: (1f) r7 -= r5
> > BPF_ALU64_REG(BPF_SUB, BPF_REG_7, BPF_REG_5),
> > // 16: (5d) if r8 != r6 goto pc+4
> > BPF_JMP_REG(BPF_JNE, BPF_REG_8, BPF_REG_6, 4),
> > // 17: (c7) r8 s>>= 5
> > BPF_ALU64_IMM(BPF_ARSH, BPF_REG_8, 5),
> > // 18: (cf) r0 s>>= r0
> > BPF_ALU64_REG(BPF_ARSH, BPF_REG_0, BPF_REG_0),
> > // 19: (7f) r0 >>= r0
> > BPF_ALU64_REG(BPF_RSH, BPF_REG_0, BPF_REG_0),
> > // 20: (7c) w5 >>= w8
> > BPF_ALU32_REG(BPF_RSH, BPF_REG_5, BPF_REG_8),
> > BPF_EXIT_INSN()
> >
> > > After load:
> > > ================================================================================
> > > UBSAN: shift-out-of-bounds in kernel/bpf/tnum.c:44:9
> > > shift exponent 255 is too large for 64-bit type 'long long unsigned int'
> > > CPU: 2 PID: 8574 Comm: bpf-test Not tainted
> > > 6.6.0-rc5-01400-g7c2f6c9fb91f-dirty #21
> > > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
> > > Call Trace:
> > > <TASK>
> > > __dump_stack lib/dump_stack.c:88 [inline]
> > > dump_stack_lvl+0x8e/0xb0 lib/dump_stack.c:106
> > > ubsan_epilogue lib/ubsan.c:217 [inline]
> > > __ubsan_handle_shift_out_of_bounds+0x15a/0x2f0 lib/ubsan.c:387
> > > tnum_rshift.cold+0x17/0x32 kernel/bpf/tnum.c:44
> > > scalar32_min_max_rsh kernel/bpf/verifier.c:12999 [inline]
> > > adjust_scalar_min_max_vals kernel/bpf/verifier.c:13224 [inline]
> > > adjust_reg_min_max_vals+0x1936/0x5d50 kernel/bpf/verifier.c:13338
> > > do_check kernel/bpf/verifier.c:16890 [inline]
> > > do_check_common+0x2f64/0xbb80 kernel/bpf/verifier.c:19563
> > > do_check_main kernel/bpf/verifier.c:19626 [inline]
> > > bpf_check+0x65cf/0xa9e0 kernel/bpf/verifier.c:20263
> > > bpf_prog_load+0x110e/0x1b20 kernel/bpf/syscall.c:2717
> > > __sys_bpf+0xfcf/0x4380 kernel/bpf/syscall.c:5365
> > > __do_sys_bpf kernel/bpf/syscall.c:5469 [inline]
> > > __se_sys_bpf kernel/bpf/syscall.c:5467 [inline]
> > > __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5467
> > > do_syscall_x64 arch/x86/entry/common.c:50 [inline]
> > > do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
> > > entry_SYSCALL_64_after_hwframe+0x63/0xcd
> > > RIP: 0033:0x5610511e23cd
> > > Code: 24 80 00 00 00 48 0f 42 d0 48 89 94 24 68 0c 00 00 b8 41 01 00
> > > 00 bf 05 00 00 00 ba 90 00 00 00 48 8d b44
> > > RSP: 002b:00007f5357fc7820 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
> > > RAX: ffffffffffffffda RBX: 0000000000000095 RCX: 00005610511e23cd
> > > RDX: 0000000000000090 RSI: 00007f5357fc8410 RDI: 0000000000000005
> > > RBP: 0000000000000000 R08: 00007f5357fca458 R09: 00007f5350005520
> > > R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000002b
> > > R13: 0000000d00000000 R14: 000000000000002b R15: 000000000000002b
> > > </TASK>
> > >
> > > If remove insn #20, the verifier gives:
> > > -------- Verifier Log --------
> > > func#0 @0
> > > 0: R1=ctx(off=0,imm=0) R10=fp0
> > > 0: (bc) w0 = w1 ;
> > > R0_w=scalar(smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
> > > R1=ctx(off=0,
> > > imm=0)
> > > 1: (bf) r2 = r0 ;
> > > R0_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0;
> > > 0xffffffff))
> > > R2_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
> > > 2: (18) r3 = 0xd ; R3_w=13
> > > 4: (bc) w4 = w0 ;
> > > R0_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0;
> > > 0xffffffff))
> > > R4_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
> > > 5: (bf) r5 = r0 ;
> > > R0_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0;
> > > 0xffffffff))
> > > R5_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
> > > 6: (bf) r7 = r3 ; R3_w=13 R7_w=13
> > > 7: (bf) r8 = r4 ;
> > > R4_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0;
> > > 0xffffffff))
> > > R8_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0; 0xffffffff))
> > > 8: (2f) r8 *= r5 ;
> > > R5_w=scalar(id=1,smin=0,smax=umax=4294967295,var_off=(0x0;
> > > 0xffffffff))
> > > R8_w=scalar()
> > > 9: (cf) r5 s>>= r5 ; R5_w=scalar()
> > > 10: (a6) if w8 < 0xfffffffb goto pc+9 ;
> > > R8_w=scalar(smin=-9223372032559808520,umin=4294967288,smin32=-5,smax32=-1,
> > > umin32=4294967291,var_off=(0xfffffff8; 0xffffffff00000007))
> > > 11: (1f) r7 -= r5 ; R5_w=scalar() R7_w=scalar()
> > > 12: (71) r6 = *(u8 *)(r1 +17) ; R1=ctx(off=0,imm=0)
> > > R6_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,
> > > var_off=(0x0; 0xff))
> > > 13: (5f) r3 &= r8 ;
> > > R3_w=scalar(smin=umin=smin32=umin32=8,smax=umax=smax32=umax32=13,var_off=(0x8;
> > > 0x5)) R8_w=scalar(smin=-9223372032559808520,umin=4294967288,smin32=-5,smax32=-1,umin32=4294967291,var_off=(0xffff)
> > > 14: (74) w2 >>= 30 ;
> > > R2_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=3,var_off=(0x0;
> > > 0x3))
> > > 15: (1f) r7 -= r5 ; R5_w=scalar() R7_w=scalar()
> > > 16: (5d) if r8 != r6 goto pc+3 ;
> > > R6_w=scalar(smin=umin=umin32=4294967288,smax=umax=umax32=255,smin32=-8,smax32=-1,
> > > var_off=(0xfffffff8; 0x7))
> > > R8_w=scalar(smin=umin=4294967288,smax=umax=255,smin32=-5,smax32=-1,umin32=4294967291)
>
> Seems like the root cause is a bug with range tracking, before instruction
> 16, R8_w was
>
> R8_w=scalar(smin=-9223372032559808520,umin=4294967288,smin32=-5,smax32=-1,umin32=4294967291,var_off=(0xffff)
>
> But after instruction 16 it becomes
>
> R8_w=scalar(smin=umin=4294967288,smax=umax=255,smin32=-5,smax32=-1,umin32=4294967291)
>
> Where smin_value > smax_value, and umin_value > umax_value (among other
> things). This should be the main problem.
>
> The verifier operates on the assumption that smin_value <= smax_value and
> umin_value <= umax_value, and if that assumption is not upheld then all kind
> of things can go wrong.
>
> Maybe Andrii may already has this worked out in the range-vs-range that he
> has mentioned[1] he'll be sending soon.
>
> 1: https://lore.kernel.org/bpf/CAEf4BzbJ3hZCSt4nLCZCV4cxV60+kddiSMsy7-9ou_RaQV7B8A@mail.gmail.com/
>
> > > 17: (c7) r8 s>>= 5 ; R8_w=134217727
> > > 18: (cf) r0 s>>= r0 ; R0_w=scalar()
> > > 19: (7f) r0 >>= r0 ; R0=scalar()
> > > 20: (95) exit
> > >
> > > from 16 to 20: safe
> > >
> > > from 10 to 20: safe
> > > processed 22 insns (limit 1000000) max_states_per_insn 0 total_states
> > > 1 peak_states 1 mark_read 1
> > > -------- End of Verifier Log --------
> > >
> > > In adjust_scalar_min_max_vals(), src_reg.umax_value is 7, thus pass
> > > the check here:
> > > if (umax_val >= insn_bitness) {
> > > /* Shifts greater than 31 or 63 are undefined.
> > > * This includes shifts by a negative number.
> > > */
> > > mark_reg_unknown(env, regs, insn->dst_reg);
> > > break;
> > > }
> > >
> > > However in scalar32_min_max_rsh(), both src_reg->u32_min_value and
> > > src_reg->u32_max_value is 134217727, causing tnum_rsh() shit by 255.
> > >
> > > Should we check if(src_reg->u32_max_value < insn_bitness) before calling
> > > scalar32_min_max_rsh(), rather than only checking umax_val? Or, is it
> > > because issues somewhere else, incorrectly setting u32_min_value to
> > > 34217727
>
> Checking umax_val alone is be enough and we don't need to add a check for
> u32_max_value, because (when we have correct range tracking) u32_max_value
> should always be smaller than u32_value. So the fix needed here is to have
> correct range tracking.
Since you are running fuzzer on BPF verifier, it may be be helpful to check
that the following conditions are always met:
- umin <= umax
- smin <= smax
- u32_min <= u32_max
- s32_min <= s32_max
- u32_max <= umax
- smin <= s32_min
- s32_max <= smax
If any of these condition is not upheld then it should be a range tracking
bug.
> > > Best
> > > Hao Sun
Powered by blists - more mailing lists