| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFULd4ZSzJGzckYLGuh-uVXqpk4E7bxnen0_y5HqFiPkr_36PA@mail.gmail.com>
Date: Thu, 26 Oct 2023 20:47:37 +0200
From: Uros Bizjak <ubizjak@...il.com>
To: Brian Gerst <brgerst@...il.com>
Cc: linux-kernel@...r.kernel.org, x86@...nel.org,
Ingo Molnar <mingo@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Borislav Petkov <bp@...en8.de>,
"H . Peter Anvin" <hpa@...or.com>,
Peter Zijlstra <peterz@...radead.org>
Subject: Re: [PATCH v2 07/11] x86/percpu/64: Use relative percpu offsets
On Thu, Oct 26, 2023 at 6:01 PM Brian Gerst <brgerst@...il.com> wrote:
>
> The percpu section is currently linked at virtual address 0, because
> older compilers hardcoded the stack protector canary value at a fixed
> offset from the start of the GS segment. Now that the canary is a
> normal percpu variable, the percpu section can be linked normally.
> This means that x86-64 will calculate percpu offsets like most other
> architectures, as the delta between the initial percpu address and the
> dynamically allocated memory.
The comments above MSR_GS_BASE setup should be reviewed or removed. I
don't think they need to be set up to access stack canary, they are
just clearing MSR now.
>
> Signed-off-by: Brian Gerst <brgerst@...il.com>
With fixed comments:
Reviewed-by: Uros Bizjak <ubizjak@...il.com>
> ---
> arch/x86/kernel/head_64.S | 6 ------
> arch/x86/kernel/setup_percpu.c | 12 ++----------
> arch/x86/kernel/vmlinux.lds.S | 24 +-----------------------
> arch/x86/platform/pvh/head.S | 6 ------
> arch/x86/tools/relocs.c | 10 +++-------
> arch/x86/xen/xen-head.S | 6 ------
> init/Kconfig | 2 +-
> 7 files changed, 7 insertions(+), 59 deletions(-)
>
> diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
> index f2453eb38417..b35f74e58dd7 100644
> --- a/arch/x86/kernel/head_64.S
> +++ b/arch/x86/kernel/head_64.S
> @@ -72,14 +72,8 @@ SYM_CODE_START_NOALIGN(startup_64)
>
> /* Setup GSBASE to allow stack canary access for C code */
> movl $MSR_GS_BASE, %ecx
> -#ifdef CONFIG_SMP
> - leaq __per_cpu_load(%rip), %rdx
> - movl %edx, %eax
> - shrq $32, %rdx
> -#else
> xorl %eax, %eax
> xorl %edx, %edx
> -#endif
> wrmsr
>
> call startup_64_setup_env
> diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
> index 2c97bf7b56ae..8707dd07b9ce 100644
> --- a/arch/x86/kernel/setup_percpu.c
> +++ b/arch/x86/kernel/setup_percpu.c
> @@ -23,18 +23,10 @@
> #include <asm/cpumask.h>
> #include <asm/cpu.h>
>
> -#ifdef CONFIG_X86_64
> -#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load)
> -#else
> -#define BOOT_PERCPU_OFFSET 0
> -#endif
> -
> -DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
> +DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off);
> EXPORT_PER_CPU_SYMBOL(this_cpu_off);
>
> -unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init = {
> - [0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
> -};
> +unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init;
> EXPORT_SYMBOL(__per_cpu_offset);
>
> /*
> diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
> index e6126cd21615..efa4885060b5 100644
> --- a/arch/x86/kernel/vmlinux.lds.S
> +++ b/arch/x86/kernel/vmlinux.lds.S
> @@ -103,12 +103,6 @@ const_pcpu_hot = pcpu_hot;
> PHDRS {
> text PT_LOAD FLAGS(5); /* R_E */
> data PT_LOAD FLAGS(6); /* RW_ */
> -#ifdef CONFIG_X86_64
> -#ifdef CONFIG_SMP
> - percpu PT_LOAD FLAGS(6); /* RW_ */
> -#endif
> - init PT_LOAD FLAGS(7); /* RWE */
> -#endif
> note PT_NOTE FLAGS(0); /* ___ */
> }
>
> @@ -224,21 +218,7 @@ SECTIONS
> __init_begin = .; /* paired with __init_end */
> }
>
> -#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
> - /*
> - * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
> - * output PHDR, so the next output section - .init.text - should
> - * start another segment - init.
> - */
> - PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
> - ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
> - "per-CPU data too large - increase CONFIG_PHYSICAL_START")
> -#endif
> -
> INIT_TEXT_SECTION(PAGE_SIZE)
> -#ifdef CONFIG_X86_64
> - :init
> -#endif
>
> /*
> * Section for code used exclusively before alternatives are run. All
> @@ -368,9 +348,7 @@ SECTIONS
> EXIT_DATA
> }
>
> -#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
> PERCPU_SECTION(INTERNODE_CACHE_BYTES)
> -#endif
>
> . = ALIGN(PAGE_SIZE);
>
> @@ -508,7 +486,7 @@ SECTIONS
> * Per-cpu symbols which need to be offset from __per_cpu_load
> * for the boot processor.
> */
> -#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
> +#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x)
> INIT_PER_CPU(gdt_page);
> INIT_PER_CPU(irq_stack_backing_store);
>
> diff --git a/arch/x86/platform/pvh/head.S b/arch/x86/platform/pvh/head.S
> index d215b16bf89f..4bd925b23436 100644
> --- a/arch/x86/platform/pvh/head.S
> +++ b/arch/x86/platform/pvh/head.S
> @@ -96,14 +96,8 @@ SYM_CODE_START_LOCAL(pvh_start_xen)
> 1:
> /* Set base address in stack canary descriptor. */
> mov $MSR_GS_BASE,%ecx
> -#ifdef CONFIG_SMP
> - lea __per_cpu_load(%rip), %rdx
> - mov %edx, %eax
> - shr $32, %rdx
> -#else
> xor %eax, %eax
> xor %edx, %edx
> -#endif
> wrmsr
>
> call xen_prepare_pvh
> diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
> index 3ccd9d4fcf9c..01efbfdd3eb3 100644
> --- a/arch/x86/tools/relocs.c
> +++ b/arch/x86/tools/relocs.c
> @@ -815,12 +815,7 @@ static void percpu_init(void)
> */
> static int is_percpu_sym(ElfW(Sym) *sym, const char *symname)
> {
> - int shndx = sym_index(sym);
> -
> - return (shndx == per_cpu_shndx) &&
> - strcmp(symname, "__init_begin") &&
> - strcmp(symname, "__per_cpu_load") &&
> - strncmp(symname, "init_per_cpu_", 13);
> + return 0;
> }
>
>
> @@ -1043,7 +1038,8 @@ static int cmp_relocs(const void *va, const void *vb)
>
> static void sort_relocs(struct relocs *r)
> {
> - qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
> + if (r->count)
> + qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
> }
>
> static int write32(uint32_t v, FILE *f)
> diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
> index 9ce0d9d268bb..c1d9c92b417a 100644
> --- a/arch/x86/xen/xen-head.S
> +++ b/arch/x86/xen/xen-head.S
> @@ -57,14 +57,8 @@ SYM_CODE_START(startup_xen)
> * the per cpu areas are set up.
> */
> movl $MSR_GS_BASE,%ecx
> -#ifdef CONFIG_SMP
> - leaq __per_cpu_load(%rip), %rdx
> - movl %edx, %eax
> - shrq $32, %rdx
> -#else
> xorl %eax, %eax
> xorl %edx, %edx
> -#endif
> wrmsr
>
> mov %rsi, %rdi
> diff --git a/init/Kconfig b/init/Kconfig
> index 6d35728b94b2..1af31b23e376 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1718,7 +1718,7 @@ config KALLSYMS_ALL
> config KALLSYMS_ABSOLUTE_PERCPU
> bool
> depends on KALLSYMS
> - default X86_64 && SMP
> + default n
>
> config KALLSYMS_BASE_RELATIVE
> bool
> --
> 2.41.0
>
Powered by blists - more mailing lists