linux-kernel - Re: [PATCH v3 5/5] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f961166d-a6ab-82f9-b5ed-113b81a1d709@quicinc.com>
Date:   Thu, 26 Oct 2023 11:37:11 +0530
From:   Mrinmay Sarkar <quic_msarkar@...cinc.com>
To:     Manivannan Sadhasivam <mani@...nel.org>
CC:     <agross@...nel.org>, <andersson@...nel.org>,
        <krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
        <konrad.dybcio@...aro.org>, <quic_shazhuss@...cinc.com>,
        <quic_nitegupt@...cinc.com>, <quic_ramkri@...cinc.com>,
        <quic_nayiluri@...cinc.com>, <dmitry.baryshkov@...aro.org>,
        <robh@...nel.org>, <quic_krichai@...cinc.com>,
        <quic_vbadigan@...cinc.com>, <quic_parass@...cinc.com>,
        Lorenzo Pieralisi <lpieralisi@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Kishon Vijay Abraham I <kishon@...nel.org>,
        Vinod Koul <vkoul@...nel.org>, <linux-pci@...r.kernel.org>,
        <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <mhi@...ts.linux.dev>,
        <linux-phy@...ts.infradead.org>
Subject: Re: [PATCH v3 5/5] arm64: dts: qcom: sa8775p: Add ep pcie0 controller
 node


On 10/25/2023 1:22 PM, Manivannan Sadhasivam wrote:
> On Thu, Oct 19, 2023 at 05:07:10PM +0530, Mrinmay Sarkar wrote:
>> Add ep pcie dtsi node for pcie0 controller found on sa8775p platform.
>> It supports gen4 and x2 link width. Due to some stability issue in
>> gen4 enabling gen3 as of now.
>>
>> Signed-off-by: Mrinmay Sarkar <quic_msarkar@...cinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/sa8775p.dtsi | 48 +++++++++++++++++++++++++++++++++++
>>   1 file changed, 48 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>> index 13dd44d..2aa7383 100644
>> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>> @@ -3714,4 +3714,52 @@
>>   
>>   		status = "disabled";
>>   	};
>> +
>> +	pcie0_ep: pcie-ep@...0000 {
>> +		compatible = "qcom,sa8775p-pcie-ep";
>> +		reg = <0x0 0x01c00000 0x0 0x3000>,
>> +		      <0x0 0x40000000 0x0 0xf20>,
>> +		      <0x0 0x40000f20 0x0 0xa8>,
>> +		      <0x0 0x40001000 0x0 0x4000>,
>> +		      <0x0 0x40200000 0x0 0x100000>,
>> +		      <0x0 0x01c03000 0x0 0x1000>,
>> +		      <0x0 0x40005000 0x0 0x2000>;
> Can we sort the reg entries?

Sort based on reg address? I think we are following the same sequence 
for other target as well.

--Mrinmay

>> +		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
>> +			    "mmio", "dma";
>> +
>> +		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
>> +			<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
>> +			<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
>> +			<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
>> +			<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
>> +
>> +		clock-names = "aux",
>> +			      "cfg",
>> +			      "bus_master",
>> +			      "bus_slave",
>> +			      "slave_q2a";
>> +
>> +		interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +		interrupt-names = "global", "doorbell", "dma";
>> +
>> +		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
>> +				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
>> +		interconnect-names = "pcie-mem", "cpu-pcie";
>> +
>> +		iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
>> +			    <0x100 &pcie_smmu 0x0001 0x1>;
> I think I recommended using "iommu-map" instead of "iommus" property. But
> looking at it again, I think it is fine to use just "iommus" property as the SID
> will be associated with the EP directly.
>
> Unless you want to have different SID for each function.
>
>> +
>> +		resets = <&gcc GCC_PCIE_0_BCR>;
>> +		reset-names = "core";
>> +		power-domains = <&gcc PCIE_0_GDSC>;
>> +		phys = <&pcie0_phy>;
>> +		phy-names = "pciephy";
>> +		max-link-speed = <3>;
> Please add a comment here that you are limiting the Gen speed due to stability
> issues. Like,
>
> 		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
>
>> +		num-lanes = <2>;
> Can you check if the controller is cache coherent? If so, we should add
> "dma-coherent" property.
>
> - Mani
>
>> +
>> +		status = "disabled";
>> +	};
>>   };
>> -- 
>> 2.7.4
>>