| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <37d9ee0e-fcb6-48d6-b1dc-a41110277fc0@intel.com>
Date: Thu, 26 Oct 2023 11:50:21 +0200
From: Wojciech Drewek <wojciech.drewek@...el.com>
To: Ivan Vecera <ivecera@...hat.com>, <netdev@...r.kernel.org>
CC: Jesse Brandeburg <jesse.brandeburg@...el.com>,
Tony Nguyen <anthony.l.nguyen@...el.com>,
"David S. Miller" <davem@...emloft.net>,
"Eric Dumazet" <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
<intel-wired-lan@...ts.osuosl.org>, <linux-kernel@...r.kernel.org>,
Jacob Keller <jacob.e.keller@...el.com>
Subject: Re: [PATCH iwl-next] i40e: Remove queue tracking fields from
i40e_adminq_ring
On 26.10.2023 10:38, Ivan Vecera wrote:
> Fields 'head', 'tail', 'len', 'bah' and 'bal' in i40e_adminq_ring
> are used to store register offsets. These offsets are initialized
> and remains constant so there is no need to store them in the
> i40e_adminq_ring structure.
>
> Remove these fields from i40e_adminq_ring and use register offset
> constants instead. Remove i40e_adminq_init_regs() that originally
> stores these constants into these fields.
>
> Finally improve i40e_check_asq_alive() that assumes that
> non-zero value of hw->aq.asq.len indicates fully initialized
> AdminQ send queue. Replace it by check for non-zero value
> of field hw->aq.asq.count that is non-zero when the sending
> queue is initialized and is zeroed during shutdown of
> the queue.
>
> Signed-off-by: Ivan Vecera <ivecera@...hat.com>
> ---
Hmmmm, I have deja vu XD
Reviewed-by: Wojciech Drewek <wojciech.drewek@...el.com>
> drivers/net/ethernet/intel/i40e/i40e_adminq.c | 86 +++++++------------
> drivers/net/ethernet/intel/i40e/i40e_adminq.h | 7 --
> drivers/net/ethernet/intel/i40e/i40e_common.c | 8 +-
> drivers/net/ethernet/intel/i40e/i40e_main.c | 8 +-
> 4 files changed, 39 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
> index 896c43905309..f73f5930fc58 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
> @@ -8,27 +8,6 @@
>
> static void i40e_resume_aq(struct i40e_hw *hw);
>
> -/**
> - * i40e_adminq_init_regs - Initialize AdminQ registers
> - * @hw: pointer to the hardware structure
> - *
> - * This assumes the alloc_asq and alloc_arq functions have already been called
> - **/
> -static void i40e_adminq_init_regs(struct i40e_hw *hw)
> -{
> - /* set head and tail registers in our local struct */
> - hw->aq.asq.tail = I40E_PF_ATQT;
> - hw->aq.asq.head = I40E_PF_ATQH;
> - hw->aq.asq.len = I40E_PF_ATQLEN;
> - hw->aq.asq.bal = I40E_PF_ATQBAL;
> - hw->aq.asq.bah = I40E_PF_ATQBAH;
> - hw->aq.arq.tail = I40E_PF_ARQT;
> - hw->aq.arq.head = I40E_PF_ARQH;
> - hw->aq.arq.len = I40E_PF_ARQLEN;
> - hw->aq.arq.bal = I40E_PF_ARQBAL;
> - hw->aq.arq.bah = I40E_PF_ARQBAH;
> -}
> -
> /**
> * i40e_alloc_adminq_asq_ring - Allocate Admin Queue send rings
> * @hw: pointer to the hardware structure
> @@ -254,17 +233,17 @@ static int i40e_config_asq_regs(struct i40e_hw *hw)
> u32 reg = 0;
>
> /* Clear Head and Tail */
> - wr32(hw, hw->aq.asq.head, 0);
> - wr32(hw, hw->aq.asq.tail, 0);
> + wr32(hw, I40E_PF_ATQH, 0);
> + wr32(hw, I40E_PF_ATQT, 0);
>
> /* set starting point */
> - wr32(hw, hw->aq.asq.len, (hw->aq.num_asq_entries |
> + wr32(hw, I40E_PF_ATQLEN, (hw->aq.num_asq_entries |
> I40E_PF_ATQLEN_ATQENABLE_MASK));
> - wr32(hw, hw->aq.asq.bal, lower_32_bits(hw->aq.asq.desc_buf.pa));
> - wr32(hw, hw->aq.asq.bah, upper_32_bits(hw->aq.asq.desc_buf.pa));
> + wr32(hw, I40E_PF_ATQBAL, lower_32_bits(hw->aq.asq.desc_buf.pa));
> + wr32(hw, I40E_PF_ATQBAH, upper_32_bits(hw->aq.asq.desc_buf.pa));
>
> /* Check one register to verify that config was applied */
> - reg = rd32(hw, hw->aq.asq.bal);
> + reg = rd32(hw, I40E_PF_ATQBAL);
> if (reg != lower_32_bits(hw->aq.asq.desc_buf.pa))
> ret_code = -EIO;
>
> @@ -283,20 +262,20 @@ static int i40e_config_arq_regs(struct i40e_hw *hw)
> u32 reg = 0;
>
> /* Clear Head and Tail */
> - wr32(hw, hw->aq.arq.head, 0);
> - wr32(hw, hw->aq.arq.tail, 0);
> + wr32(hw, I40E_PF_ARQH, 0);
> + wr32(hw, I40E_PF_ARQT, 0);
>
> /* set starting point */
> - wr32(hw, hw->aq.arq.len, (hw->aq.num_arq_entries |
> + wr32(hw, I40E_PF_ARQLEN, (hw->aq.num_arq_entries |
> I40E_PF_ARQLEN_ARQENABLE_MASK));
> - wr32(hw, hw->aq.arq.bal, lower_32_bits(hw->aq.arq.desc_buf.pa));
> - wr32(hw, hw->aq.arq.bah, upper_32_bits(hw->aq.arq.desc_buf.pa));
> + wr32(hw, I40E_PF_ARQBAL, lower_32_bits(hw->aq.arq.desc_buf.pa));
> + wr32(hw, I40E_PF_ARQBAH, upper_32_bits(hw->aq.arq.desc_buf.pa));
>
> /* Update tail in the HW to post pre-allocated buffers */
> - wr32(hw, hw->aq.arq.tail, hw->aq.num_arq_entries - 1);
> + wr32(hw, I40E_PF_ARQT, hw->aq.num_arq_entries - 1);
>
> /* Check one register to verify that config was applied */
> - reg = rd32(hw, hw->aq.arq.bal);
> + reg = rd32(hw, I40E_PF_ARQBAL);
> if (reg != lower_32_bits(hw->aq.arq.desc_buf.pa))
> ret_code = -EIO;
>
> @@ -439,11 +418,11 @@ static int i40e_shutdown_asq(struct i40e_hw *hw)
> }
>
> /* Stop firmware AdminQ processing */
> - wr32(hw, hw->aq.asq.head, 0);
> - wr32(hw, hw->aq.asq.tail, 0);
> - wr32(hw, hw->aq.asq.len, 0);
> - wr32(hw, hw->aq.asq.bal, 0);
> - wr32(hw, hw->aq.asq.bah, 0);
> + wr32(hw, I40E_PF_ATQH, 0);
> + wr32(hw, I40E_PF_ATQT, 0);
> + wr32(hw, I40E_PF_ATQLEN, 0);
> + wr32(hw, I40E_PF_ATQBAL, 0);
> + wr32(hw, I40E_PF_ATQBAH, 0);
>
> hw->aq.asq.count = 0; /* to indicate uninitialized queue */
>
> @@ -473,11 +452,11 @@ static int i40e_shutdown_arq(struct i40e_hw *hw)
> }
>
> /* Stop firmware AdminQ processing */
> - wr32(hw, hw->aq.arq.head, 0);
> - wr32(hw, hw->aq.arq.tail, 0);
> - wr32(hw, hw->aq.arq.len, 0);
> - wr32(hw, hw->aq.arq.bal, 0);
> - wr32(hw, hw->aq.arq.bah, 0);
> + wr32(hw, I40E_PF_ARQH, 0);
> + wr32(hw, I40E_PF_ARQT, 0);
> + wr32(hw, I40E_PF_ARQLEN, 0);
> + wr32(hw, I40E_PF_ARQBAL, 0);
> + wr32(hw, I40E_PF_ARQBAH, 0);
>
> hw->aq.arq.count = 0; /* to indicate uninitialized queue */
>
> @@ -608,9 +587,6 @@ int i40e_init_adminq(struct i40e_hw *hw)
> goto init_adminq_exit;
> }
>
> - /* Set up register offsets */
> - i40e_adminq_init_regs(hw);
> -
> /* setup ASQ command write back timeout */
> hw->aq.asq_cmd_timeout = I40E_ASQ_CMD_TIMEOUT;
>
> @@ -720,9 +696,9 @@ static u16 i40e_clean_asq(struct i40e_hw *hw)
>
> desc = I40E_ADMINQ_DESC(*asq, ntc);
> details = I40E_ADMINQ_DETAILS(*asq, ntc);
> - while (rd32(hw, hw->aq.asq.head) != ntc) {
> + while (rd32(hw, I40E_PF_ATQH) != ntc) {
> i40e_debug(hw, I40E_DEBUG_AQ_COMMAND,
> - "ntc %d head %d.\n", ntc, rd32(hw, hw->aq.asq.head));
> + "ntc %d head %d.\n", ntc, rd32(hw, I40E_PF_ATQH));
>
> if (details->callback) {
> I40E_ADMINQ_CALLBACK cb_func =
> @@ -756,7 +732,7 @@ static bool i40e_asq_done(struct i40e_hw *hw)
> /* AQ designers suggest use of head for better
> * timing reliability than DD bit
> */
> - return rd32(hw, hw->aq.asq.head) == hw->aq.asq.next_to_use;
> + return rd32(hw, I40E_PF_ATQH) == hw->aq.asq.next_to_use;
>
> }
>
> @@ -797,7 +773,7 @@ i40e_asq_send_command_atomic_exec(struct i40e_hw *hw,
>
> hw->aq.asq_last_status = I40E_AQ_RC_OK;
>
> - val = rd32(hw, hw->aq.asq.head);
> + val = rd32(hw, I40E_PF_ATQH);
> if (val >= hw->aq.num_asq_entries) {
> i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
> "AQTX: head overrun at %d\n", val);
> @@ -889,7 +865,7 @@ i40e_asq_send_command_atomic_exec(struct i40e_hw *hw,
> if (hw->aq.asq.next_to_use == hw->aq.asq.count)
> hw->aq.asq.next_to_use = 0;
> if (!details->postpone)
> - wr32(hw, hw->aq.asq.tail, hw->aq.asq.next_to_use);
> + wr32(hw, I40E_PF_ATQT, hw->aq.asq.next_to_use);
>
> /* if cmd_details are not defined or async flag is not set,
> * we need to wait for desc write back
> @@ -949,7 +925,7 @@ i40e_asq_send_command_atomic_exec(struct i40e_hw *hw,
> /* update the error if time out occurred */
> if ((!cmd_completed) &&
> (!details->async && !details->postpone)) {
> - if (rd32(hw, hw->aq.asq.len) & I40E_GL_ATQLEN_ATQCRIT_MASK) {
> + if (rd32(hw, I40E_PF_ATQLEN) & I40E_GL_ATQLEN_ATQCRIT_MASK) {
> i40e_debug(hw, I40E_DEBUG_AQ_MESSAGE,
> "AQTX: AQ Critical error.\n");
> status = -EIO;
> @@ -1103,7 +1079,7 @@ int i40e_clean_arq_element(struct i40e_hw *hw,
> }
>
> /* set next_to_use to head */
> - ntu = rd32(hw, hw->aq.arq.head) & I40E_PF_ARQH_ARQH_MASK;
> + ntu = rd32(hw, I40E_PF_ARQH) & I40E_PF_ARQH_ARQH_MASK;
> if (ntu == ntc) {
> /* nothing to do - shouldn't need to update ring's values */
> ret_code = -EALREADY;
> @@ -1151,7 +1127,7 @@ int i40e_clean_arq_element(struct i40e_hw *hw,
> desc->params.external.addr_low = cpu_to_le32(lower_32_bits(bi->pa));
>
> /* set tail = the last cleaned desc index. */
> - wr32(hw, hw->aq.arq.tail, ntc);
> + wr32(hw, I40E_PF_ARQT, ntc);
> /* ntc is updated to tail + 1 */
> ntc++;
> if (ntc == hw->aq.num_arq_entries)
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.h b/drivers/net/ethernet/intel/i40e/i40e_adminq.h
> index 80125bea80a2..ee86d2c53079 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_adminq.h
> +++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.h
> @@ -29,13 +29,6 @@ struct i40e_adminq_ring {
> /* used for interrupt processing */
> u16 next_to_use;
> u16 next_to_clean;
> -
> - /* used for queue tracking */
> - u32 head;
> - u32 tail;
> - u32 len;
> - u32 bah;
> - u32 bal;
> };
>
> /* ASQ transaction details */
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
> index e171f4814e21..bd52b73cf61f 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_common.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
> @@ -195,11 +195,11 @@ void i40e_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc,
> **/
> bool i40e_check_asq_alive(struct i40e_hw *hw)
> {
> - if (hw->aq.asq.len)
> - return !!(rd32(hw, hw->aq.asq.len) &
> - I40E_PF_ATQLEN_ATQENABLE_MASK);
> - else
> + /* Check if the queue is initialized */
> + if (!hw->aq.asq.count)
> return false;
> +
> + return !!(rd32(hw, I40E_PF_ATQLEN) & I40E_PF_ATQLEN_ATQENABLE_MASK);
> }
>
> /**
> diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
> index 69dafdecb243..91563512b2bd 100644
> --- a/drivers/net/ethernet/intel/i40e/i40e_main.c
> +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
> @@ -10141,7 +10141,7 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
> return;
>
> /* check for error indications */
> - val = rd32(&pf->hw, pf->hw.aq.arq.len);
> + val = rd32(&pf->hw, I40E_PF_ARQLEN);
> i40e_trace(state_arq, pf, val);
> oldval = val;
> if (val & I40E_PF_ARQLEN_ARQVFE_MASK) {
> @@ -10161,9 +10161,9 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
> val &= ~I40E_PF_ARQLEN_ARQCRIT_MASK;
> }
> if (oldval != val)
> - wr32(&pf->hw, pf->hw.aq.arq.len, val);
> + wr32(&pf->hw, I40E_PF_ARQLEN, val);
>
> - val = rd32(&pf->hw, pf->hw.aq.asq.len);
> + val = rd32(&pf->hw, I40E_PF_ATQLEN);
> i40e_trace(state_asq, pf, val);
> oldval = val;
> if (val & I40E_PF_ATQLEN_ATQVFE_MASK) {
> @@ -10182,7 +10182,7 @@ static void i40e_clean_adminq_subtask(struct i40e_pf *pf)
> val &= ~I40E_PF_ATQLEN_ATQCRIT_MASK;
> }
> if (oldval != val)
> - wr32(&pf->hw, pf->hw.aq.asq.len, val);
> + wr32(&pf->hw, I40E_PF_ATQLEN, val);
>
> event.buf_len = I40E_MAX_AQ_BUF_SIZE;
> event.msg_buf = kzalloc(event.buf_len, GFP_KERNEL);
Powered by blists - more mailing lists