| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 26 Oct 2023 10:07:00 +0000
From: CK Hu (胡俊光) <ck.hu@...iatek.com>
To: "matthias.bgg@...il.com" <matthias.bgg@...il.com>,
Jason-JH Lin (林睿祥)
<Jason-JH.Lin@...iatek.com>,
"angelogioacchino.delregno@...labora.com"
<angelogioacchino.delregno@...labora.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>,
"chunkuang.hu@...nel.org" <chunkuang.hu@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Singo Chang (張興國)
<Singo.Chang@...iatek.com>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
"linaro-mm-sig@...ts.linaro.org" <linaro-mm-sig@...ts.linaro.org>,
"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Jason-ch Chen (陳建豪)
<Jason-ch.Chen@...iatek.com>,
Shawn Sung (宋孝謙)
<Shawn.Sung@...iatek.com>,
Nancy Lin (林欣螢) <Nancy.Lin@...iatek.com>,
Johnson Wang (王聖鑫)
<Johnson.Wang@...iatek.com>,
"jkardatzke@...gle.com" <jkardatzke@...gle.com>,
"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"conor+dt@...nel.org" <conor+dt@...nel.org>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v2 07/11] drm/mediatek: Add secure layer config support
for ovl
Hi, Jason:
On Mon, 2023-10-23 at 12:45 +0800, Jason-JH.Lin wrote:
> Add secure layer config support for ovl.
>
> Signed-off-by: Jason-JH.Lin <jason-jh.lin@...iatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 ++
> drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 31
> +++++++++++++++++--
> .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 12 +++++++
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 ++
> 4 files changed, 46 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index 2254038519e1..dec937b183a8 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -9,6 +9,7 @@
> #include <linux/soc/mediatek/mtk-cmdq.h>
> #include <linux/soc/mediatek/mtk-mmsys.h>
> #include <linux/soc/mediatek/mtk-mutex.h>
> +#include "mtk_drm_ddp_comp.h"
> #include "mtk_drm_plane.h"
> #include "mtk_mdp_rdma.h"
>
> @@ -79,6 +80,7 @@ void mtk_ovl_clk_disable(struct device *dev);
> void mtk_ovl_config(struct device *dev, unsigned int w,
> unsigned int h, unsigned int vrefresh,
> unsigned int bpc, struct cmdq_pkt *cmdq_pkt);
> +u64 mtk_ovl_get_sec_port(struct mtk_ddp_comp *comp, unsigned int
> idx);
> int mtk_ovl_layer_check(struct device *dev, unsigned int idx,
> struct mtk_plane_state *mtk_state);
> void mtk_ovl_layer_config(struct device *dev, unsigned int idx,
> @@ -112,6 +114,7 @@ void mtk_ovl_adaptor_clk_disable(struct device
> *dev);
> void mtk_ovl_adaptor_config(struct device *dev, unsigned int w,
> unsigned int h, unsigned int vrefresh,
> unsigned int bpc, struct cmdq_pkt
> *cmdq_pkt);
> +u64 mtk_ovl_adaptor_get_sec_port(struct mtk_ddp_comp *comp, unsigned
> int idx);
> void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int
> idx,
> struct mtk_plane_state *state,
> struct cmdq_pkt *cmdq_pkt);
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> index 2bffe4245466..76e832e4875a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c
> @@ -46,6 +46,7 @@
> #define DISP_REG_OVL_ADDR(ovl, n) ((ovl)->data->addr +
> 0x20 * (n))
> #define DISP_REG_OVL_HDR_ADDR(ovl, n) ((ovl)->data-
> >addr + 0x20 * (n) + 0x04)
> #define DISP_REG_OVL_HDR_PITCH(ovl, n) ((ovl)->data-
> >addr + 0x20 * (n) + 0x08)
> +#define DISP_REG_OVL_SECURE 0x0fc0
>
> #define GMC_THRESHOLD_BITS 16
> #define GMC_THRESHOLD_HIGH ((1 << GMC_THRESHOLD_BITS) / 4)
> @@ -126,8 +127,19 @@ struct mtk_disp_ovl {
> const struct mtk_disp_ovl_data *data;
> void (*vblank_cb)(void *data);
> void *vblank_cb_data;
> + resource_size_t regs_pa;
> };
>
> +u64 mtk_ovl_get_sec_port(struct mtk_ddp_comp *comp, unsigned int
> idx)
> +{
> + if (comp->id == DDP_COMPONENT_OVL0)
> + return 1ULL << CMDQ_SEC_DISP_OVL0;
> + else if (comp->id == DDP_COMPONENT_OVL1)
> + return 1ULL << CMDQ_SEC_DISP_OVL1;
> +
> + return 0;
> +}
> +
> static irqreturn_t mtk_disp_ovl_irq_handler(int irq, void *dev_id)
> {
> struct mtk_disp_ovl *priv = dev_id;
> @@ -449,8 +461,22 @@ void mtk_ovl_layer_config(struct device *dev,
> unsigned int idx,
> DISP_REG_OVL_SRC_SIZE(idx));
> mtk_ddp_write_relaxed(cmdq_pkt, offset, &ovl->cmdq_reg, ovl-
> >regs,
> DISP_REG_OVL_OFFSET(idx));
> - mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg, ovl-
> >regs,
> - DISP_REG_OVL_ADDR(ovl, idx));
> +
> + if (state->pending.is_sec) {
> + const struct drm_format_info *fmt_info =
> drm_format_info(fmt);
> + unsigned int buf_size = (pending->height - 1) *
> pending->pitch +
> + pending->width * fmt_info-
> >cpp[0];
> +
> + mtk_ddp_write_mask(cmdq_pkt, BIT(idx), &ovl->cmdq_reg,
> ovl->regs,
> + DISP_REG_OVL_SECURE, BIT(idx));
> + mtk_ddp_sec_write(cmdq_pkt, ovl->regs_pa +
> DISP_REG_OVL_ADDR(ovl, idx),
> + pending->addr, CMDQ_IWC_H_2_MVA, 0,
> buf_size, 0);
Why pass ovl->regs_pa into cmdq driver? cmdq just need subsys and
offset.
In addition, why pass buf_size?
Regards,
CK
> + } else {
> + mtk_ddp_write_mask(cmdq_pkt, 0, &ovl->cmdq_reg, ovl-
> >regs,
> + DISP_REG_OVL_SECURE, BIT(idx));
> + mtk_ddp_write_relaxed(cmdq_pkt, addr, &ovl->cmdq_reg,
> ovl->regs,
> + DISP_REG_OVL_ADDR(ovl, idx));
> + }
>
> if (is_afbc) {
> mtk_ddp_write_relaxed(cmdq_pkt, hdr_addr, &ovl-
> >cmdq_reg, ovl->regs,
> @@ -529,6 +555,7 @@ static int mtk_disp_ovl_probe(struct
> platform_device *pdev)
> }
>
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->regs_pa = res->start;
> priv->regs = devm_ioremap_resource(dev, res);
> if (IS_ERR(priv->regs)) {
> dev_err(dev, "failed to ioremap ovl\n");
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index 6bf6367853fb..28a0bccfb0b9 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -83,6 +83,18 @@ static const struct ovl_adaptor_comp_match
> comp_matches[OVL_ADAPTOR_ID_MAX] = {
> [OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, 0 },
> };
>
> +static const u64 ovl_adaptor_sec_port[] = {
> + 1ULL << CMDQ_SEC_VDO1_DISP_RDMA_L0,
> + 1ULL << CMDQ_SEC_VDO1_DISP_RDMA_L1,
> + 1ULL << CMDQ_SEC_VDO1_DISP_RDMA_L2,
> + 1ULL << CMDQ_SEC_VDO1_DISP_RDMA_L3,
> +};
> +
> +u64 mtk_ovl_adaptor_get_sec_port(struct mtk_ddp_comp *comp, unsigned
> int idx)
> +{
> + return ovl_adaptor_sec_port[idx];
> +}
> +
> void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int
> idx,
> struct mtk_plane_state *state,
> struct cmdq_pkt *cmdq_pkt)
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 3dca936b9143..eec3a1cc2ed4 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -373,6 +373,7 @@ static const struct mtk_ddp_comp_funcs ddp_ovl =
> {
> .bgclr_in_off = mtk_ovl_bgclr_in_off,
> .get_formats = mtk_ovl_get_formats,
> .get_num_formats = mtk_ovl_get_num_formats,
> + .get_sec_port = mtk_ovl_get_sec_port,
> };
>
> static const struct mtk_ddp_comp_funcs ddp_postmask = {
> @@ -424,6 +425,7 @@ static const struct mtk_ddp_comp_funcs
> ddp_ovl_adaptor = {
> .remove = mtk_ovl_adaptor_remove_comp,
> .get_formats = mtk_ovl_adaptor_get_formats,
> .get_num_formats = mtk_ovl_adaptor_get_num_formats,
> + .get_sec_port = mtk_ovl_adaptor_get_sec_port,
> };
>
> static const char * const mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] =
> {
Powered by blists - more mailing lists