linux-kernel - Re: [PATCH 2/3] pinctrl: qcom: handle intr_target_reg wakeup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <vtr3s7fyrionospnmzvm2xl2plsue2jlrc3tjifqua3ihucxao@6hxi3i22bwxs>
Date:   Wed, 25 Oct 2023 19:10:03 -0700
From:   Bjorn Andersson <andersson@...nel.org>
To:     Neil Armstrong <neil.armstrong@...aro.org>
Cc:     Andy Gross <agross@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] pinctrl: qcom: handle intr_target_reg
 wakeup_present/enable bits

On Wed, Oct 25, 2023 at 09:33:52AM +0200, Neil Armstrong wrote:
> New platforms uses a new set of bits to control the wakeirq
> delivery to the PDC block.
> 
> The intr_wakeup_present_bit indicates if the GPIO supports
> wakeirq and intr_wakeup_enable_bit enables wakeirq delivery
> to the PDC block.
> 
> While the name seems to imply this only enables wakeup events,
> it is required to allow interrupts events to the PDC block.
> 
> Enable this bit in the irq resource request/free if:
> - gpio is in wakeirq map
> - has the intr_wakeup_present_bit
> - the intr_wakeup_enable_bit is set
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
> ---
>  drivers/pinctrl/qcom/pinctrl-msm.c | 32 ++++++++++++++++++++++++++++++++
>  drivers/pinctrl/qcom/pinctrl-msm.h |  5 +++++
>  2 files changed, 37 insertions(+)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index 395040346d0f..2489a9ac8455 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -1196,6 +1196,7 @@ static int msm_gpio_irq_reqres(struct irq_data *d)
>  {
>  	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
>  	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
> +	const struct msm_pingroup *g = &pctrl->soc->groups[d->hwirq];
>  	int ret;
>  
>  	if (!try_module_get(gc->owner))
> @@ -1221,6 +1222,24 @@ static int msm_gpio_irq_reqres(struct irq_data *d)
>  	 */
>  	irq_set_status_flags(d->irq, IRQ_DISABLE_UNLAZY);
>  
> +	/*
> +	 * If the wakeup_enable bit is present and marked as available for the
> +	 * requested GPIO, it should be enabled when the GPIO is marked as
> +	 * wake irq in order to allow the interrupt event to be transfered to
> +	 * the PDC HW.
> +	 * While the name implies only the wakeup event, it's also required for
> +	 * the interrupt event.
> +	 */
> +	if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) {
> +		u32 intr_cfg;
> +
> +		intr_cfg = msm_readl_intr_cfg(pctrl, g);
> +		if (intr_cfg & BIT(g->intr_wakeup_present_bit)) {
> +			intr_cfg |= BIT(g->intr_wakeup_enable_bit);
> +			msm_writel_intr_cfg(intr_cfg, pctrl, g);

If I understand correctly, the two modified functions are hooked
straight into the irq_chip, which would imply that nothing prevent
concurrent execution of this and the other accessors of intr_cfg.

If I'm reading this correctly, I think we should perform this
read-modify-write under the spinlock.

Regards,
Bjorn

> +		}
> +	}
> +
>  	return 0;
>  out:
>  	module_put(gc->owner);
> @@ -1230,6 +1249,19 @@ static int msm_gpio_irq_reqres(struct irq_data *d)
>  static void msm_gpio_irq_relres(struct irq_data *d)
>  {
>  	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
> +	const struct msm_pingroup *g = &pctrl->soc->groups[d->hwirq];
> +
> +	/* Disable the wakeup_enable bit if it has been set in msm_gpio_irq_reqres() */
> +	if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) {
> +		u32 intr_cfg;
> +
> +		intr_cfg = msm_readl_intr_cfg(pctrl, g);
> +		if (intr_cfg & BIT(g->intr_wakeup_present_bit)) {
> +			intr_cfg &= ~BIT(g->intr_wakeup_enable_bit);
> +			msm_writel_intr_cfg(intr_cfg, pctrl, g);
> +		}
> +	}
>  
>  	gpiochip_unlock_as_irq(gc, d->hwirq);
>  	module_put(gc->owner);
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
> index 4968d08a384d..63852ed70295 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.h
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.h
> @@ -58,6 +58,9 @@ struct pinctrl_pin_desc;
>   * @intr_enable_bit:      Offset in @intr_cfg_reg for enabling the interrupt for this group.
>   * @intr_status_bit:      Offset in @intr_status_reg for reading and acking the interrupt
>   *                        status.
> + * @intr_wakeup_present_bit: Offset in @intr_target_reg specifying the GPIO can generate
> + *			  wakeup events.
> + * @intr_wakeup_enable_bit: Offset in @intr_target_reg to enable wakeup events for the GPIO.
>   * @intr_target_bit:      Offset in @intr_target_reg for configuring the interrupt routing.
>   * @intr_target_width:    Number of bits used for specifying interrupt routing target.
>   * @intr_target_kpss_val: Value in @intr_target_bit for specifying that the interrupt from
> @@ -100,6 +103,8 @@ struct msm_pingroup {
>  	unsigned intr_status_bit:5;
>  	unsigned intr_ack_high:1;
>  
> +	unsigned intr_wakeup_present_bit:5;
> +	unsigned intr_wakeup_enable_bit:5;
>  	unsigned intr_target_bit:5;
>  	unsigned intr_target_width:5;
>  	unsigned intr_target_kpss_val:5;
> 
> -- 
> 2.34.1
>