lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 27 Oct 2023 13:32:44 +0530
From:   Gokul Sriram P <quic_gokulsri@...cinc.com>
To:     <dmitry.baryshkov@...aro.org>, <agross@...nel.org>,
        <andersson@...nel.org>, <konrad.dybcio@...aro.org>,
        <mturquette@...libre.com>, <sboyd@...nel.org>,
        <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <jassisinghbrar@...il.com>, <linux-arm-msm@...r.kernel.org>,
        <linux-clk@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC:     <quic_varada@...cinc.com>, <quic_srichara@...cinc.com>
Subject: Re: [PATCH V3 0/3] Add APSS clock driver support for IPQ5018

Hi everyone, a gentle remainder to review and acknowledge the change.

Regards,
Gokul

On 9/25/2023 3:58 PM, Gokul Sriram Palanisamy wrote:
> This series adds support for the APSS clock to bump the CPU frequency
> above 800MHz. APSS PLL found in the IPQ5018 is of type Stromer.
>
> - The first patch in the series adds the required a53pll compatible.
>
> - The second patch reuses Stormer Plus PLL offsets, adds configuration values
>    for Stromer.
>
> - The third patch adds dts nodes to enable the pll along with the cpu
>    operating frequency table.
>
> This series depends on below series
> https://patchwork.kernel.org/project/linux-arm-msm/cover/20230913-gpll_cleanup-v2-0-c8ceb1a37680@quicinc.com/
>
> Changes in v3:
> - Addressed review comment by Dmitry in patch 3.
>
> Changes in v2:
> - Addressed review comments
> - Adds dependency on above mentioned patch series for dropping
>    CLK_SET_RATE_PARENT flag from GPLL clocks, GPLL0 clock provider for
>    mailbox
> - Add CPU operating point at 800MHz based on the review comments.
>
> Gokul Sriram Palanisamy (3):
>    dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible
>    clk: qcom: apss-ipq-pll: add support for IPQ5018
>    arm64: dts: qcom: ipq5018: enable the CPUFreq support
>
>   .../bindings/clock/qcom,a53pll.yaml           |  1 +
>   arch/arm64/boot/dts/qcom/ipq5018.dtsi         | 40 +++++++++++++++++++
>   drivers/clk/qcom/apss-ipq-pll.c               | 21 ++++++++++
>   3 files changed, 62 insertions(+)
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ