| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231027-sc7280-remoteprocs-v1-7-05ce95d9315a@fairphone.com>
Date: Fri, 27 Oct 2023 16:20:29 +0200
From: Luca Weiss <luca.weiss@...rphone.com>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Manivannan Sadhasivam <mani@...nel.org>,
cros-qcom-dts-watchers@...omium.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Rob Herring <robh@...nel.org>,
Matti Lehtimäki <matti.lehtimaki@...il.com>,
linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH 7/9] arm64: dts: qcom: sc7280: Add CDSP node
Add the node for the ADSP found on the SC7280 SoC, using standard
Qualcomm firmware.
The memory region for sc7280-chrome-common.dtsi is taken from msm-5.4
yupik.dtsi since the other areas also seem to match that file there,
though I cannot be sure there.
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi | 5 +
arch/arm64/boot/dts/qcom/sc7280.dtsi | 138 +++++++++++++++++++++
2 files changed, 143 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index eb55616e0892..6e5a9d4c1fda 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -29,6 +29,11 @@ adsp_mem: memory@...00000 {
no-map;
};
+ cdsp_mem: memory@...00000 {
+ reg = <0x0 0x88f00000 0x0 0x1e00000>;
+ no-map;
+ };
+
camera_mem: memory@...00000 {
reg = <0x0 0x8ad00000 0x0 0x500000>;
no-map;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index cc153f4e6979..e15646289bf7 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3815,6 +3815,144 @@ nsp_noc: interconnect@...0000 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ remoteproc_cdsp: remoteproc@...0000 {
+ compatible = "qcom,sc7280-cdsp-pas";
+ reg = <0 0x0a300000 0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC7280_CX>,
+ <&rpmhpd SC7280_MX>;
+ power-domain-names = "cx", "mx";
+
+ interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+ memory-region = <&cdsp_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ qcom,non-secure-domain;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x11a1 0x0420>,
+ <&apps_smmu 0x1181 0x0420>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x11a2 0x0420>,
+ <&apps_smmu 0x1182 0x0420>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x11a3 0x0420>,
+ <&apps_smmu 0x1183 0x0420>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x11a4 0x0420>,
+ <&apps_smmu 0x1184 0x0420>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x11a5 0x0420>,
+ <&apps_smmu 0x1185 0x0420>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x11a6 0x0420>,
+ <&apps_smmu 0x1186 0x0420>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x11a7 0x0420>,
+ <&apps_smmu 0x1187 0x0420>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x11a8 0x0420>,
+ <&apps_smmu 0x1188 0x0420>;
+ };
+
+ /* note: secure cb9 in downstream */
+
+ compute-cb@11 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <11>;
+ iommus = <&apps_smmu 0x11ab 0x0420>,
+ <&apps_smmu 0x118b 0x0420>;
+ };
+
+ compute-cb@12 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <12>;
+ iommus = <&apps_smmu 0x11ac 0x0420>,
+ <&apps_smmu 0x118c 0x0420>;
+ };
+
+ compute-cb@13 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <13>;
+ iommus = <&apps_smmu 0x11ad 0x0420>,
+ <&apps_smmu 0x118d 0x0420>;
+ };
+
+ compute-cb@14 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <14>;
+ iommus = <&apps_smmu 0x11ae 0x0420>,
+ <&apps_smmu 0x118e 0x0420>;
+ };
+ };
+ };
+ };
+
usb_1: usb@...8800 {
compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
--
2.42.0
Powered by blists - more mailing lists