linux-kernel - [PATCH v4 0/3] arm64: dts: cn913x: add COM Express boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231029174814.559583-1-enachman@marvell.com>
Date:   Sun, 29 Oct 2023 19:48:11 +0200
From:   Elad Nachman <enachman@...vell.com>
To:     <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
        <conor+dt@...nel.org>, <andrew@...n.ch>,
        <gregory.clement@...tlin.com>, <sebastian.hesselbarth@...il.com>,
        <pali@...nel.org>, <mrkiko.rs@...il.com>,
        <chris.packham@...iedtelesis.co.nz>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
CC:     <enachman@...vell.com>, <cyuval@...vell.com>
Subject: [PATCH v4 0/3] arm64: dts: cn913x: add COM Express boards

From: Elad Nachman <enachman@...vell.com>

Add support for CN9130 and CN9131 COM Express Type 7 CPU
module boards by Marvell.
Define these COM Express CPU modules as dtsi, and
provide a dtsi file for a carrier board (Marvell AC5X RD
COM Express type 7 carrier board).
This Carrier board only utilizes the PCIe link, hence no
special device / driver support is provided by this dtsi file.
Finally, add dts file for the combined carrier and CPU module.

v4:
   1) reorder patches - dt bindings before dts/dtsi files

   2) correct description in dt bindings

   3) separate dt bindings for CPU module, carrier and combination

   4) make carrier board dts into dtsi, make dts for combination of
      carrier and CPU module

   5) correct compatibility strings and file names to use dashes
      instead of underscores

v3:
   1) Remove acronym which creates warnings for checkpatch.pl

   2) Correct compatibility string for ac5x rd board

   3) Add above compatibility string to dt bindings

   4) update MAINTAINERS file with ac5 series dts files

   5) remove memory property from carrier dts

   6) add comment explaining that OOB RGMII ethernet port
      connector and PHY are both on CPU module

v2:
   1) add compatibility string for the board

   2) remove unneeded hard-coded PHY LED blinking mode initialization

   3) Split the CPU portion of the carrier board to
      dtsi files, and define a dts file for the AC5X RD
      carrier board.

Elad Nachman (3):
  MAINTAINERS: add ac5 to list of maintained Marvell dts files
  dt-bindings: arm64: dts: add dt-bindings for Marvell COM Express
    boards
  arm64: dts: cn913x: add device trees for COM Express boards

 .../bindings/arm/marvell/armada-7k-8k.yaml    |  15 +++
 .../bindings/arm/marvell/marvell,ac5.yaml     |  14 +++
 MAINTAINERS                                   |   1 +
 arch/arm64/boot/dts/marvell/Makefile          |   1 +
 .../marvell/ac5x-rd-carrier-with-cn9131.dts   |  19 +++
 .../boot/dts/marvell/ac5x-rd-carrier.dtsi     |  18 +++
 .../dts/marvell/cn9130-db-comexpress.dtsi     | 101 ++++++++++++++++
 .../dts/marvell/cn9131-db-comexpress.dtsi     | 113 ++++++++++++++++++
 8 files changed, 282 insertions(+)
 create mode 100644 arch/arm64/boot/dts/marvell/ac5x-rd-carrier-with-cn9131.dts
 create mode 100644 arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi

-- 
2.25.1