[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231029212738.7871-5-samuel@sholland.org>
Date: Sun, 29 Oct 2023 16:26:58 -0500
From: Samuel Holland <samuel@...lland.org>
To: Lee Jones <lee@...nel.org>, Pavel Machek <pavel@....cz>,
linux-leds@...r.kernel.org, Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>
Cc: Samuel Holland <samuel@...lland.org>,
Andre Przywara <andre.przywara@....com>,
Conor Dooley <conor+dt@...nel.org>,
Cristian Ciocaltea <cristian.ciocaltea@...labora.com>,
Guo Ren <guoren@...nel.org>,
Jisheng Zhang <jszhang@...nel.org>,
John Watts <contact@...kia.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Maksim Kiselev <bigunclemax@...il.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
Palmer Dabbelt <palmer@...belt.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Trevor Woerner <twoerner@...il.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-sunxi@...ts.linux.dev
Subject: [PATCH v8 4/5] riscv: dts: allwinner: d1: Add LED controller node
Allwinner D1 contains an LED controller. Add its devicetree node, as
well as the pinmux used by the reference board design.
Acked-by: Guo Ren <guoren@...nel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@...il.com>
Tested-by: Trevor Woerner <twoerner@...il.com>
Signed-off-by: Samuel Holland <samuel@...lland.org>
---
(no changes since v5)
Changes in v5:
- New patch for v5
arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi | 6 ++++++
arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 15 +++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
index b18f368e06e0..b0fb0ea377bc 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
@@ -58,6 +58,12 @@ i2c2_pb0_pins: i2c2-pb0-pins {
function = "i2c2";
};
+ /omit-if-no-ref/
+ ledc_pc0_pin: ledc-pc0-pin {
+ pins = "PC0";
+ function = "ledc";
+ };
+
/omit-if-no-ref/
uart0_pb8_pins: uart0-pb8-pins {
pins = "PB8", "PB9";
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index 5a9d7f5a75b4..a476b59ba306 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -156,6 +156,21 @@ ccu: clock-controller@...1000 {
#reset-cells = <1>;
};
+ ledc: led-controller@...8000 {
+ compatible = "allwinner,sun20i-d1-ledc",
+ "allwinner,sun50i-a100-ledc";
+ reg = <0x2008000 0x400>;
+ interrupts = <SOC_PERIPHERAL_IRQ(20) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_LEDC>;
+ dmas = <&dma 42>;
+ dma-names = "tx";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
gpadc: adc@...9000 {
compatible = "allwinner,sun20i-d1-gpadc";
reg = <0x2009000 0x400>;
--
2.41.0
Powered by blists - more mailing lists