| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAA8EJprjRWVTgq4gr8p7ksFkoeKt3CxfhjyMZVDx4aS9FqgbcA@mail.gmail.com>
Date: Mon, 30 Oct 2023 01:14:11 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Sui Jingfeng <suijingfeng@...ngson.cn>
Cc: Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH 4/8] drm/loongson: Started to attach display bridge driver
for LS7A1000
On Sun, 29 Oct 2023 at 21:46, Sui Jingfeng <suijingfeng@...ngson.cn> wrote:
>
> Loongson ML5B_MA board using ITE IT66121 HDMI transmitter to support HDMI
> display output, with the vbios provided the necessary information, we are
> able to create a minimal drm bridge driver for it. After apply this patch
> we are able to change mode freely.
Please see the Documentation/process/submitting-patches.rst:
Describe your changes in imperative mood, e.g. "make xyzzy do frotz"
instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy
to do frotz", as if you are giving orders to the codebase to change
its behaviour.
>
> Tested on LS3A5000+LS7A1000 ML5B_MA board.
>
> $ dmesg | grep drm
>
> [drm] dc: 264MHz, gmc: 529MHz, gpu: 529MHz
> [drm] Dedicated vram start: 0xe0030000000, size: 64MiB
> [drm] Loongson VBIOS version: 0.3
> [drm] Loongson VBIOS: has 8 DCBs
> [drm] VRAM: 4096 pages ready
> [drm] GTT: 32768 pages ready
> [drm] lsdc-i2c0(sda pin mask=1, scl pin mask=2) created
> [drm] lsdc-i2c1(sda pin mask=4, scl pin mask=8) created
> [drm] DisplayPipe-0 has DVO-0
> [drm] device address(0x4d) is not correct
> [drm] i2c client IT66121@...c created
> [drm] IT66121 attached, Vendor ID: 0x4954, Device ID: 0x612
> [drm] Total 2 outputs
> [drm] registered irq: 40
> [drm] Initialized loongson 1.0.0 20220701 for 0000:00:06.1 on minor 0
> loongson 0000:00:06.1: [drm] fb0: loongsondrmfb frame buffer device
>
> Signed-off-by: Sui Jingfeng <suijingfeng@...ngson.cn>
> ---
> drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 144 +++++++-----------
> 1 file changed, 55 insertions(+), 89 deletions(-)
>
> diff --git a/drivers/gpu/drm/loongson/lsdc_output_7a1000.c b/drivers/gpu/drm/loongson/lsdc_output_7a1000.c
> index 6fc8dd1c7d9a..e12f9a0157d0 100644
> --- a/drivers/gpu/drm/loongson/lsdc_output_7a1000.c
> +++ b/drivers/gpu/drm/loongson/lsdc_output_7a1000.c
> @@ -10,6 +10,7 @@
> #include "lsdc_drv.h"
> #include "lsdc_output.h"
>
> +#include "ite_it66121.h"
> /*
> * The display controller in the LS7A1000 exports two DVO interfaces, thus
> * external encoder is required, except connected to the DPI panel directly.
> @@ -38,68 +39,6 @@
> * TODO: Add support for non-transparent encoders
> */
>
> -static int ls7a1000_dpi_connector_get_modes(struct drm_connector *conn)
> -{
> - unsigned int num = 0;
> - struct edid *edid;
> -
> - if (conn->ddc) {
> - edid = drm_get_edid(conn, conn->ddc);
> - if (edid) {
> - drm_connector_update_edid_property(conn, edid);
> - num = drm_add_edid_modes(conn, edid);
> - kfree(edid);
> - }
> -
> - return num;
> - }
> -
> - num = drm_add_modes_noedid(conn, 1920, 1200);
> -
> - drm_set_preferred_mode(conn, 1024, 768);
> -
> - return num;
> -}
> -
> -static struct drm_encoder *
> -ls7a1000_dpi_connector_get_best_encoder(struct drm_connector *connector,
> - struct drm_atomic_state *state)
> -{
> - struct lsdc_output *output = connector_to_lsdc_output(connector);
> -
> - return &output->encoder;
> -}
> -
> -static const struct drm_connector_helper_funcs
> -ls7a1000_dpi_connector_helpers = {
> - .atomic_best_encoder = ls7a1000_dpi_connector_get_best_encoder,
> - .get_modes = ls7a1000_dpi_connector_get_modes,
> -};
> -
> -static enum drm_connector_status
> -ls7a1000_dpi_connector_detect(struct drm_connector *connector, bool force)
> -{
> - struct i2c_adapter *ddc = connector->ddc;
> -
> - if (ddc) {
> - if (drm_probe_ddc(ddc))
> - return connector_status_connected;
> -
> - return connector_status_disconnected;
> - }
> -
> - return connector_status_unknown;
> -}
> -
> -static const struct drm_connector_funcs ls7a1000_dpi_connector_funcs = {
> - .detect = ls7a1000_dpi_connector_detect,
> - .fill_modes = drm_helper_probe_single_connector_modes,
> - .destroy = drm_connector_cleanup,
> - .reset = drm_atomic_helper_connector_reset,
> - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state
> -};
> -
> static void ls7a1000_pipe0_encoder_reset(struct drm_encoder *encoder)
> {
> struct drm_device *ddev = encoder->dev;
> @@ -139,40 +78,67 @@ static const struct drm_encoder_funcs ls7a1000_encoder_funcs[2] = {
> },
> };
>
> +/*
> + * This is a default output description for LS7A1000/LS2K1000, this is always
> + * true from the hardware perspective. It is just that when there are external
> + * display bridge connected, this description no longer complete. As it cannot
> + * describe the topology about the external encoders.
> + */
> +static const struct lsdc_output_desc ls7a1000_output_desc[2] = {
> + {
> + .pipe = 0,
> + .encoder_type = DRM_MODE_ENCODER_DPI,
> + .connector_type = DRM_MODE_CONNECTOR_DPI,
> + .encoder_funcs = &ls7a1000_encoder_funcs[0],
> + .encoder_helper_funcs = &lsdc_encoder_helper_funcs,
> + .connector_funcs = &lsdc_connector_funcs,
> + .connector_helper_funcs = &lsdc_connector_helper_funcs,
> + .name = "DVO-0",
> + },
> + {
> + .pipe = 1,
> + .encoder_type = DRM_MODE_ENCODER_DPI,
> + .connector_type = DRM_MODE_CONNECTOR_DPI,
> + .encoder_funcs = &ls7a1000_encoder_funcs[1],
> + .encoder_helper_funcs = &lsdc_encoder_helper_funcs,
> + .connector_funcs = &lsdc_connector_funcs,
> + .connector_helper_funcs = &lsdc_connector_helper_funcs,
> + .name = "DVO-1",
> + },
> +};
> +
> int ls7a1000_output_init(struct drm_device *ddev,
> struct lsdc_display_pipe *dispipe,
> struct i2c_adapter *ddc,
> unsigned int index)
> {
> struct lsdc_output *output = &dispipe->output;
> - struct drm_encoder *encoder = &output->encoder;
> - struct drm_connector *connector = &output->connector;
> - int ret;
> -
> - ret = drm_encoder_init(ddev, encoder, &ls7a1000_encoder_funcs[index],
> - DRM_MODE_ENCODER_TMDS, "encoder-%u", index);
> - if (ret)
> - return ret;
> -
> - encoder->possible_crtcs = BIT(index);
> -
> - ret = drm_connector_init_with_ddc(ddev, connector,
> - &ls7a1000_dpi_connector_funcs,
> - DRM_MODE_CONNECTOR_DPI, ddc);
> - if (ret)
> - return ret;
> -
> - drm_info(ddev, "display pipe-%u has a DVO\n", index);
> -
> - drm_connector_helper_add(connector, &ls7a1000_dpi_connector_helpers);
> -
> - drm_connector_attach_encoder(connector, encoder);
> + enum loongson_vbios_encoder_name encoder_name = 0;
> + struct drm_bridge *bridge = NULL;
> + u8 slave_addr;
> + bool ret;
> +
> + output->descp = &ls7a1000_output_desc[index];
> +
> + ret = loongson_vbios_query_encoder_info(ddev, index, NULL,
> + &encoder_name, &slave_addr);
> + if (!ret)
> + goto skip;
> +
> + switch (encoder_name) {
> + case ENCODER_CHIP_IT66121:
> + bridge = it66121_bridge_create(ddev, ddc, slave_addr, false,
> + 0, index);
No. You have a fancy interface describing connected devices. Could you
please use the infrastructure that already exists for you. For i2c
devices you have to create an i2c device on a corresponding i2c bus.
See drivers/i2c/i2c-core-of.c for inspiration.
> + break;
> + default:
> + break;
> + }
>
> - connector->polled = DRM_CONNECTOR_POLL_CONNECT |
> - DRM_CONNECTOR_POLL_DISCONNECT;
> + if (IS_ERR(bridge))
> + goto skip;
>
> - connector->interlace_allowed = 0;
> - connector->doublescan_allowed = 0;
> + output->bridge = bridge;
>
> - return 0;
> +skip:
> + return lsdc_output_init(ddev, dispipe, ddc, index);
> }
> --
> 2.34.1
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists