[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231030192846.27934-1-a-bhatia1@ti.com>
Date: Tue, 31 Oct 2023 00:58:46 +0530
From: Aradhya Bhatia <a-bhatia1@...com>
To: Tomi Valkeinen <tomba@...nel.org>, Jyri Sarha <jyri.sarha@....fi>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>,
Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Boris Brezillon <boris.brezillon@...labora.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Francesco Dolcini <francesco@...cini.it>,
Jan Kiszka <jan.kiszka@...mens.com>,
Sam Ravnborg <sam@...nborg.org>
CC: DRI Development List <dri-devel@...ts.freedesktop.org>,
Linux Kernel List <linux-kernel@...r.kernel.org>,
Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Devarsh Thakkar <devarsht@...com>,
Jayesh Choudhary <j-choudhary@...com>,
Aradhya Bhatia <a-bhatia1@...com>
Subject: [PATCH] drm/bridge: tc358767: Support input format negotiation hook
With new connector model, tc358767 will not create the connector, when
DRM_BRIDGE_ATTACH_NO_CONNECTOR is set and display-controller driver will
rely on format negotiation to setup the encoder format.
Add the missing input-format negotiation hook in the
drm_bridge_funcs to complete DRM_BRIDGE_ATTACH_NO_CONNECTOR support.
Input format is selected to MEDIA_BUS_FMT_RGB888_1X24 as default, as is
the case with older model.
Reported-by: Jan Kiszka <jan.kiszka@...mens.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@...com>
---
Notes:
* Since I do not have hardware with me, this was just build tested. I would
appreciate it if someone could test and review it, especically somebody, who
uses the bridge for DPI/DSI to eDP format conversion.
* The Toshiba TC358767 bridge is not enabled in arm64 defconfig by default,
when it should be. Hence, I sent a quick patch[0] earlier.
[0]: https://lore.kernel.org/all/20231030152834.18450-1-a-bhatia1@ti.com/
drivers/gpu/drm/bridge/tc358767.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index ef2e373606ba..0affcefdeb1c 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1751,6 +1751,30 @@ tc_dpi_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
return input_fmts;
}
+static u32 *
+tc_edp_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts;
+
+ *num_input_fmts = 0;
+
+ input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ /* This is the DSI/DPI-end bus format */
+ input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+ *num_input_fmts = 1;
+
+ return input_fmts;
+}
+
static const struct drm_bridge_funcs tc_dpi_bridge_funcs = {
.attach = tc_dpi_bridge_attach,
.mode_valid = tc_dpi_mode_valid,
@@ -1777,6 +1801,7 @@ static const struct drm_bridge_funcs tc_edp_bridge_funcs = {
.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
.atomic_reset = drm_atomic_helper_bridge_reset,
+ .atomic_get_input_bus_fmts = tc_edp_atomic_get_input_bus_fmts,
};
static bool tc_readable_reg(struct device *dev, unsigned int reg)
base-commit: c503e3eec382ac708ee7adf874add37b77c5d312
--
2.42.0
Powered by blists - more mailing lists