[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ef377506-4132-4805-a76e-18f241afe319@linaro.org>
Date: Mon, 30 Oct 2023 22:12:02 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Robert Marko <robimarko@...il.com>
Cc: agross@...nel.org, andersson@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
mturquette@...libre.com, sboyd@...nel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
Kathiravan Thirumoorthy <quic_kathirav@...cinc.com>
Subject: Re: [PATCH 2/3] clk: qcom: ipq6018: add USB GDSCs
On 30.10.2023 21:37, Robert Marko wrote:
> On Mon, 30 Oct 2023 at 20:37, Konrad Dybcio <konrad.dybcio@...aro.org> wrote:
>>
>> On 29.10.2023 12:04, Robert Marko wrote:
>>> On Wed, 25 Oct 2023 at 12:45, Robert Marko <robimarko@...il.com> wrote:
>>>>
>>>> IPQ6018 has GDSC-s for each of the USB ports, so lets define them as such
>>>> and drop the curent code that is de-asserting the USB GDSC-s as part of
>>>> the GCC probe.
>>>>
>>>> Signed-off-by: Robert Marko <robimarko@...il.com>
>>>
>>> Unfortunately, after testing on multiple devices I hit the same GDSC
>>> issue I had a long time ago
>>> that was the reason I did not send this upstream.
>>> It seems that USB3 port GDSC (USB0 GDSC in code) works just fine,
>>> however the USB2 one
>>> (USB1 GDSC in code) it is stuck off and USB2 port will fail due to this:
>>> 1.607531] ------------[ cut here ]------------
>>> [ 1.607559] usb1_gdsc status stuck at 'off'
>>> [ 1.607592] WARNING: CPU: 0 PID: 35 at gdsc_toggle_logic+0x16c/0x174
>>> [ 1.615120] Modules linked in:
>> Can you dump GDSCR (the entire 32-bit register) at boot and when toggling?
>
> Sure, here it is:
> [ 0.023760] qcom,gcc-ipq6018 1800000.gcc: reg: 0x3e078 val: 0x8222004 init
> [ 0.023782] qcom,gcc-ipq6018 1800000.gcc: reg: 0x3f078 val: 0x8222004 init
> [ 0.988626] qcom,gcc-ipq6018 1800000.gcc: reg: 0x3f078 val:
> 0x8282000 before toggle
> [ 1.202506] qcom,gcc-ipq6018 1800000.gcc: reg: 0x3f078 val:
> 0x8282000 after toggle
> [ 1.207208] qcom,gcc-ipq6018 1800000.gcc: reg: 0x3e078 val:
> 0xa0282000 before toggle
Any chance
.en_few_wait_val = 0x2
(turning BIT(19) into BIT(17))
will make a difference?
Konrad
Powered by blists - more mailing lists