[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231030072337.2341539-5-contact@jookia.org>
Date: Mon, 30 Oct 2023 18:23:34 +1100
From: John Watts <contact@...kia.org>
To: dri-devel@...ts.freedesktop.org
Cc: Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Sam Ravnborg <sam@...nborg.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>,
Bjorn Andersson <andersson@...nel.org>,
Chris Morgan <macromorgan@...mail.com>,
Jagan Teki <jagan@...eble.ai>,
Linus Walleij <linus.walleij@...aro.org>,
John Watts <contact@...kia.org>,
Paul Cercueil <paul@...pouillou.net>,
Christophe Branchereau <cbranchereau@...il.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RFC PATCH v4 3/7] drm/panel: nv3052c: Allow specifying registers per panel
Panel initialization registers are per-display and not tied to the
controller itself. Different panels will specify their own registers.
Attach the sequences to the panel info struct so future panels
can specify their own sequences.
Signed-off-by: John Watts <contact@...kia.org>
---
.../gpu/drm/panel/panel-newvision-nv3052c.c | 24 ++++++++++++-------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 90dea21f9856..b0114b5e8554 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -20,11 +20,18 @@
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
+struct nv3052c_reg {
+ u8 cmd;
+ u8 val;
+};
+
struct nv3052c_panel_info {
const struct drm_display_mode *display_modes;
unsigned int num_modes;
u16 width_mm, height_mm;
u32 bus_format, bus_flags;
+ const struct nv3052c_reg *panel_regs;
+ unsigned int panel_regs_len;
};
struct nv3052c {
@@ -36,12 +43,7 @@ struct nv3052c {
struct gpio_desc *reset_gpio;
};
-struct nv3052c_reg {
- u8 cmd;
- u8 val;
-};
-
-static const struct nv3052c_reg nv3052c_panel_regs[] = {
+static const struct nv3052c_reg ltk035c5444t_panel_regs[] = {
// EXTC Command set enable, select page 1
{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
// Mostly unknown registers
@@ -244,6 +246,8 @@ static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
static int nv3052c_prepare(struct drm_panel *panel)
{
struct nv3052c *priv = to_nv3052c(panel);
+ const struct nv3052c_reg *panel_regs = priv->panel_info->panel_regs;
+ unsigned int panel_regs_len = priv->panel_info->panel_regs_len;
struct mipi_dbi *dbi = &priv->dbi;
unsigned int i;
int err;
@@ -260,9 +264,9 @@ static int nv3052c_prepare(struct drm_panel *panel)
gpiod_set_value_cansleep(priv->reset_gpio, 0);
usleep_range(5000, 20000);
- for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
- err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
- nv3052c_panel_regs[i].val);
+ for (i = 0; i < panel_regs_len; i++) {
+ err = mipi_dbi_command(dbi, panel_regs[i].cmd,
+ panel_regs[i].val);
if (err) {
dev_err(priv->dev, "Unable to set register: %d\n", err);
@@ -463,6 +467,8 @@ static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
.height_mm = 64,
.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .panel_regs = ltk035c5444t_panel_regs,
+ .panel_regs_len = ARRAY_SIZE(ltk035c5444t_panel_regs),
};
static const struct spi_device_id nv3052c_ids[] = {
--
2.42.0
Powered by blists - more mailing lists