lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231030053632.5109-1-crescentcy.hsieh@moxa.com>
Date:   Mon, 30 Oct 2023 13:36:32 +0800
From:   Crescent CY Hsieh <crescentcy.hsieh@...a.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>
Cc:     linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
        Crescent CY Hsieh <crescentcy.hsieh@...a.com>
Subject: [PATCH] tty: serial: Add RS422 flag to struct serial_rs485

Add "SER_RS422_ENABLED" flag within struct serial_rs485, so that serial
port can switching interface into RS422 if supported by using ioctl
command "TIOCSRS485".

In case of interfaces confliction, add checks within
uart_sanitize_serial_rs485() such that only one of RS422/RS485 is set.

Signed-off-by: Crescent CY Hsieh <crescentcy.hsieh@...a.com>
---
 drivers/tty/serial/serial_core.c | 19 +++++++++++++++++--
 include/uapi/linux/serial.h      |  4 ++++
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 831d03361..afbffa9dd 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1305,7 +1305,7 @@ static int uart_get_icount(struct tty_struct *tty,
 
 #define SER_RS485_LEGACY_FLAGS	(SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | \
 				 SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX | \
-				 SER_RS485_TERMINATE_BUS)
+				 SER_RS485_TERMINATE_BUS | SER_RS422_ENABLED)
 
 static int uart_check_rs485_flags(struct uart_port *port, struct serial_rs485 *rs485)
 {
@@ -1371,11 +1371,26 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4
 {
 	u32 supported_flags = port->rs485_supported.flags;
 
-	if (!(rs485->flags & SER_RS485_ENABLED)) {
+	if (!(rs485->flags & (SER_RS485_ENABLED | SER_RS422_ENABLED))) {
 		memset(rs485, 0, sizeof(*rs485));
 		return;
 	}
 
+	/* Pick sane setting if the user enables both interfaces */
+	if (rs485->flags & (SER_RS485_ENABLED | SER_RS422_ENABLED)) {
+		dev_warn_ratelimited(port->dev,
+			"%s (%d): Invalid serial interface setting, using RS485 instead\n",
+			port->name, port->line);
+		rs485->flags &= ~SER_RS422_ENABLED;
+	}
+
+	/* Clear other bits and return if RS422 is enabled */
+	if (rs485->flags & SER_RS422_ENABLED) {
+		memset(rs485, 0, sizeof(*rs485));
+		rs485->flags |= SER_RS422_ENABLED;
+		return;
+	}
+
 	/* Pick sane settings if the user hasn't */
 	if ((supported_flags & (SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND)) &&
 	    !(rs485->flags & SER_RS485_RTS_ON_SEND) ==
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
index 53bc1af67..427609fd5 100644
--- a/include/uapi/linux/serial.h
+++ b/include/uapi/linux/serial.h
@@ -137,6 +137,8 @@ struct serial_icounter_struct {
  * * %SER_RS485_ADDRB		- Enable RS485 addressing mode.
  * * %SER_RS485_ADDR_RECV - Receive address filter (enables @addr_recv). Requires %SER_RS485_ADDRB.
  * * %SER_RS485_ADDR_DEST - Destination address (enables @addr_dest). Requires %SER_RS485_ADDRB.
+ *
+ * * %SER_RS422_ENABLED		- RS422 enabled.
  */
 struct serial_rs485 {
 	__u32	flags;
@@ -149,6 +151,8 @@ struct serial_rs485 {
 #define SER_RS485_ADDR_RECV		(1 << 7)
 #define SER_RS485_ADDR_DEST		(1 << 8)
 
+#define SER_RS422_ENABLED		(1 << 9)
+
 	__u32	delay_rts_before_send;
 	__u32	delay_rts_after_send;
 
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ