| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 31 Oct 2023 21:37:39 +0100
From: Frieder Schrempf <frieder@...s.de>
To: Conor Dooley <conor+dt@...nel.org>, devicetree@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>
Cc: Frieder Schrempf <frieder.schrempf@...tron.de>,
Alexander Stein <alexander.stein@...tq-group.com>,
Fabio Estevam <festevam@...il.com>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Marek Vasut <marex@...x.de>,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Philippe Schenker <philippe.schenker@...adex.com>,
Tim Harvey <tharvey@...eworks.com>
Subject: [PATCH 02/14] arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS support
From: Frieder Schrempf <frieder.schrempf@...tron.de>
The Kontron Electronics DL i.MX8MM consists of the BL i.MX8MM board
and a 7" LVDS panel. Provide an overlay that enables the panel.
Signed-off-by: Frieder Schrempf <frieder.schrempf@...tron.de>
---
arch/arm64/boot/dts/freescale/Makefile | 4 +
.../boot/dts/freescale/imx8mm-kontron-dl.dtso | 197 ++++++++++++++++++
2 files changed, 201 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 300049037eb0b..e08024797721a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -166,6 +166,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
+
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
new file mode 100644
index 0000000000000..b45c30a68de42
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+ compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ };
+
+ panel {
+ compatible = "panel-lvds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel>;
+ backlight = <&backlight>;
+ data-mapping = "vesa-24";
+ enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ height-mm = <86>;
+ width-mm = <154>;
+
+ panel-timing {
+ clock-frequency = <51200000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hsync-len = <1>;
+ hfront-porch = <160>;
+ hback-porch = <160>;
+ vsync-len = <1>;
+ vfront-porch = <12>;
+ vback-porch = <23>;
+ };
+
+ port {
+ panel_out_bridge: endpoint {
+ remote-endpoint = <&bridge_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi_mux_sel {
+ /delete-property/ output-high;
+ output-low;
+};
+
+&dsi_out_bridge {
+ remote-endpoint = <&bridge_in_dsi_lvds>;
+};
+
+&gpio3 {
+ panel_rst {
+ gpio-hog;
+ gpios = <20 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-reset";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_rst>;
+ };
+
+ panel_stby {
+ gpio-hog;
+ gpios = <21 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-standby";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_stby>;
+ };
+
+ panel_hinv {
+ gpio-hog;
+ gpios = <24 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-horizontal-invert";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_hinv>;
+ };
+
+ panel_vinv {
+ gpio-hog;
+ gpios = <25 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "panel-vertical-invert";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_vinv>;
+ };
+};
+
+&hdmi {
+ status = "disabled";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gt911@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 8>;
+ reset-gpios = <&gpio3 23 0>;
+ irq-gpios = <&gpio3 22 0>;
+ };
+};
+
+&lvds {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@2 {
+ reg = <2>;
+ bridge_out_panel: endpoint {
+ remote-endpoint = <&panel_out_bridge>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_panel_rst: panelrstgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x19
+ >;
+ };
+
+ pinctrl_panel_stby: panelstbygrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x19
+ >;
+ };
+
+ pinctrl_panel_hinv: panelhinvgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x19
+ >;
+ };
+
+ pinctrl_panel_vinv: panelvinvgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x19
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000083
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000083
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x6
+ >;
+ };
+
+ pinctrl_panel: panelgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x19
+ >;
+ };
+
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19
+ MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x19
+ >;
+ };
+};
--
2.42.0
Powered by blists - more mailing lists