[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231031094852.118677-9-jaewon02.kim@samsung.com>
Date: Tue, 31 Oct 2023 18:47:50 +0900
From: Jaewon Kim <jaewon02.kim@...sung.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Tomasz Figa <tomasz.figa@...il.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Linus Walleij <linus.walleij@...aro.org>,
Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-serial@...r.kernel.org,
Jaewon Kim <jaewon02.kim@...sung.com>
Subject: [PATCH 08/10] pinctrl: samsung: add exynosautv920 pinctrl
ExynosAutov920 GPIO has a different register structure.
In the existing Exynos series, EINT control register enumerated after
a specific offset (e.g EXYNOS_GPIO_ECON_OFFSET).
However, in ExynosAutov920 SoC, the register that controls EINT belongs
to each GPIO group, and each GPIO group has 0x1000 align.
This is a structure to protect the GPIO group with S2MPU in VM environment,
and will only be applied in ExynosAuto series SoCs.
Example)
-------------------------------------------------
| original | ExynosAutov920 |
|-----------------------------------------------|
| 0x0 GPIO_CON | 0x0 GPIO_CON |
| 0x4 GPIO_DAT | 0x4 GPIO_DAT |
| 0x8 GPIO_PUD | 0x8 GPIO_PUD |
| 0xc GPIO_DRV | 0xc GPIO_DRV |
| 0x700 EINT_CON | 0x18 EINT_CON |
| 0x800 EINT_FLTCON | 0x1c EINT_FLTCON0 |
| 0x900 EINT_MASK | 0x20 EINT_FLTCON1 |
| 0xa00 EINT_PEND | 0x24 EINT_MASK |
| | 0x28 EINT_PEND |
-------------------------------------------------
Pinctrl data for ExynosAutoV920 SoC.
- GPA0,GPA1 (10): External wake up interrupt
- GPQ0 (2): SPMI (PMIC I/F)
- GPB0,GPB1,GPB2,GPB3,GPB4,GPB5,GPB6 (47): I2S Audio
- GPH0,GPH1,GPH2,GPH3,GPH4,GPH5,GPH6,GPH8 (49): PCIE, UFS, Ethernet
- GPG0,GPG1,GPG2,GPG3,GPG4,GPG5 (29): General purpose
- GPP0,GPP1,GPP2,GPP3,GPP4,GPP5,GPP6,GPP7,GPP8,GPP9,GPP10 (77): USI
Signed-off-by: Jaewon Kim <jaewon02.kim@...sung.com>
---
.../pinctrl/samsung/pinctrl-exynos-arm64.c | 131 ++++++++++++++++++
drivers/pinctrl/samsung/pinctrl-exynos.c | 99 ++++++++++++-
drivers/pinctrl/samsung/pinctrl-exynos.h | 27 ++++
drivers/pinctrl/samsung/pinctrl-samsung.c | 5 +
drivers/pinctrl/samsung/pinctrl-samsung.h | 13 ++
5 files changed, 268 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
index cb965cf93705..8551b85c3e6f 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
@@ -796,3 +796,134 @@ const struct samsung_pinctrl_of_match_data fsd_of_data __initconst = {
.ctrl = fsd_pin_ctrl,
.num_ctrl = ARRAY_SIZE(fsd_pin_ctrl),
};
+
+/* pin banks of exynosautov920 pin-controller 0 (ALIVE) */
+static struct samsung_pin_bank_data exynosautov920_pin_banks0[] = {
+ EXYNOSV920_PIN_BANK_EINTW(8, 0x0000, "gpa0", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTW(2, 0x1000, "gpa1", 0x18, 0x20, 0x24),
+ EXYNOS850_PIN_BANK_EINTN(2, 0x2000, "gpq0"),
+};
+
+/* pin banks of exynosautov920 pin-controller 1 (AUD) */
+static struct samsung_pin_bank_data exynosautov920_pin_banks1[] = {
+ EXYNOSV920_PIN_BANK_EINTG(7, 0x0000, "gpb0", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(6, 0x1000, "gpb1", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x2000, "gpb2", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x3000, "gpb3", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x4000, "gpb4", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(5, 0x5000, "gpb5", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(5, 0x6000, "gpb6", 0x18, 0x24, 0x28),
+};
+
+/* pin banks of exynosautov920 pin-controller 2 (HSI0) */
+static struct samsung_pin_bank_data exynosautov920_pin_banks2[] = {
+ EXYNOSV920_PIN_BANK_EINTG(6, 0x0000, "gph0", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(2, 0x1000, "gph1", 0x18, 0x20, 0x24),
+};
+
+/* pin banks of exynosautov920 pin-controller 3 (HSI1) */
+static struct samsung_pin_bank_data exynosautov920_pin_banks3[] = {
+ EXYNOSV920_PIN_BANK_EINTG(7, 0x000, "gph8", 0x18, 0x24, 0x28),
+};
+
+/* pin banks of exynosautov920 pin-controller 4 (HSI2) */
+static struct samsung_pin_bank_data exynosautov920_pin_banks4[] = {
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x0000, "gph3", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(7, 0x1000, "gph4", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x2000, "gph5", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(7, 0x3000, "gph6", 0x18, 0x24, 0x28),
+};
+
+/* pin banks of exynosautov920 pin-controller 5 (HSI2UFS) */
+static struct samsung_pin_bank_data exynosautov920_pin_banks5[] = {
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x000, "gph2", 0x18, 0x20, 0x24),
+};
+
+/* pin banks of exynosautov920 pin-controller 6 (PERIC0) */
+static struct samsung_pin_bank_data exynosautov920_pin_banks6[] = {
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x0000, "gpp0", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x1000, "gpp1", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x2000, "gpp2", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(5, 0x3000, "gpg0", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x4000, "gpp3", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x5000, "gpp4", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x6000, "gpg2", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x7000, "gpg5", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(3, 0x8000, "gpg3", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(5, 0x9000, "gpg4", 0x18, 0x24, 0x28),
+};
+
+/* pin banks of exynosautov920 pin-controller 7 (PERIC1) */
+static struct samsung_pin_bank_data exynosautov920_pin_banks7[] = {
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x0000, "gpp5", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(5, 0x1000, "gpp6", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x2000, "gpp10", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x3000, "gpp7", 0x18, 0x24, 0x28),
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x4000, "gpp8", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x5000, "gpp11", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x6000, "gpp9", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(4, 0x7000, "gpp12", 0x18, 0x20, 0x24),
+ EXYNOSV920_PIN_BANK_EINTG(8, 0x8000, "gpg1", 0x18, 0x24, 0x28),
+};
+
+const struct samsung_pin_ctrl exynosautov920_pin_ctrl[] = {
+ {
+ /* pin-controller instance 0 ALIVE data */
+ .pin_banks = exynosautov920_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynosautov920_pin_banks0),
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 1 AUD data */
+ .pin_banks = exynosautov920_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynosautov920_pin_banks1),
+ }, {
+ /* pin-controller instance 2 HSI0 data */
+ .pin_banks = exynosautov920_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynosautov920_pin_banks2),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 2 HSI1 data */
+ .pin_banks = exynosautov920_pin_banks3,
+ .nr_banks = ARRAY_SIZE(exynosautov920_pin_banks3),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 2 HSI2 data */
+ .pin_banks = exynosautov920_pin_banks4,
+ .nr_banks = ARRAY_SIZE(exynosautov920_pin_banks4),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 2 HSI2UFS data */
+ .pin_banks = exynosautov920_pin_banks5,
+ .nr_banks = ARRAY_SIZE(exynosautov920_pin_banks5),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 2 PERIC0 data */
+ .pin_banks = exynosautov920_pin_banks6,
+ .nr_banks = ARRAY_SIZE(exynosautov920_pin_banks6),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ }, {
+ /* pin-controller instance 2 PERIC1 data */
+ .pin_banks = exynosautov920_pin_banks7,
+ .nr_banks = ARRAY_SIZE(exynosautov920_pin_banks7),
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .suspend = exynos_pinctrl_suspend,
+ .resume = exynos_pinctrl_resume,
+ },
+};
+
+const struct samsung_pinctrl_of_match_data exynosautov920_of_data __initconst = {
+ .ctrl = exynosautov920_pin_ctrl,
+ .num_ctrl = ARRAY_SIZE(exynosautov920_pin_ctrl),
+};
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index a8212fc126bf..c50ddbc6bfd4 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -56,6 +56,9 @@ static void exynos_irq_mask(struct irq_data *irqd)
unsigned int mask;
unsigned long flags;
+ if (bank->combine)
+ reg_mask = bank->mask_offset;
+
raw_spin_lock_irqsave(&bank->slock, flags);
mask = readl(bank->eint_base + reg_mask);
@@ -72,6 +75,9 @@ static void exynos_irq_ack(struct irq_data *irqd)
struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd);
unsigned long reg_pend = our_chip->eint_pend + bank->eint_offset;
+ if (bank->combine)
+ reg_pend = bank->pend_offset;
+
writel(1 << irqd->hwirq, bank->eint_base + reg_pend);
}
@@ -95,6 +101,9 @@ static void exynos_irq_unmask(struct irq_data *irqd)
if (irqd_get_trigger_type(irqd) & IRQ_TYPE_LEVEL_MASK)
exynos_irq_ack(irqd);
+ if (bank->combine)
+ reg_mask = bank->mask_offset;
+
raw_spin_lock_irqsave(&bank->slock, flags);
mask = readl(bank->eint_base + reg_mask);
@@ -221,6 +230,19 @@ static const struct exynos_irq_chip exynos_gpio_irq_chip __initconst = {
/* eint_wake_mask_value not used */
};
+static const struct exynos_irq_chip exynosautov920_gpio_irq_chip __initconst = {
+ .chip = {
+ .name = "exynosautov920_gpio_irq_chip",
+ .irq_unmask = exynos_irq_unmask,
+ .irq_mask = exynos_irq_mask,
+ .irq_ack = exynos_irq_ack,
+ .irq_set_type = exynos_irq_set_type,
+ .irq_request_resources = exynos_irq_request_resources,
+ .irq_release_resources = exynos_irq_release_resources,
+ },
+ /* eint_wake_mask_value not used */
+};
+
static int exynos_eint_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
@@ -247,7 +269,10 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
unsigned int svc, group, pin;
int ret;
- svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
+ if (bank->combine)
+ svc = readl(bank->eint_base + EXYNOSAUTOV920_SVC_OFFSET);
+ else
+ svc = readl(bank->eint_base + EXYNOS_SVC_OFFSET);
group = EXYNOS_SVC_GROUP(svc);
pin = svc & EXYNOS_SVC_NUM_MASK;
@@ -297,8 +322,12 @@ __init int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
if (bank->eint_type != EINT_TYPE_GPIO)
continue;
- bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
- sizeof(*bank->irq_chip), GFP_KERNEL);
+ if (bank->combine)
+ bank->irq_chip = devm_kmemdup(dev, &exynosautov920_gpio_irq_chip,
+ sizeof(*bank->irq_chip), GFP_KERNEL);
+ else
+ bank->irq_chip = devm_kmemdup(dev, &exynos_gpio_irq_chip,
+ sizeof(*bank->irq_chip), GFP_KERNEL);
if (!bank->irq_chip) {
ret = -ENOMEM;
goto err_domains;
@@ -456,6 +485,22 @@ static const struct exynos_irq_chip exynos7_wkup_irq_chip __initconst = {
.set_eint_wakeup_mask = exynos_pinctrl_set_eint_wakeup_mask,
};
+static const struct exynos_irq_chip exynosautov920_wkup_irq_chip __initconst = {
+ .chip = {
+ .name = "exynosautov920_wkup_irq_chip",
+ .irq_unmask = exynos_irq_unmask,
+ .irq_mask = exynos_irq_mask,
+ .irq_ack = exynos_irq_ack,
+ .irq_set_type = exynos_irq_set_type,
+ .irq_set_wake = exynos_wkup_irq_set_wake,
+ .irq_request_resources = exynos_irq_request_resources,
+ .irq_release_resources = exynos_irq_release_resources,
+ },
+ .eint_wake_mask_value = &eint_wake_mask_value,
+ .eint_wake_mask_reg = EXYNOS5433_EINT_WAKEUP_MASK,
+ .set_eint_wakeup_mask = exynos_pinctrl_set_eint_wakeup_mask,
+};
+
/* list of external wakeup controllers supported */
static const struct of_device_id exynos_wkup_irq_ids[] = {
{ .compatible = "samsung,s5pv210-wakeup-eint",
@@ -468,6 +513,8 @@ static const struct of_device_id exynos_wkup_irq_ids[] = {
.data = &exynos7_wkup_irq_chip },
{ .compatible = "samsung,exynosautov9-wakeup-eint",
.data = &exynos7_wkup_irq_chip },
+ { .compatible = "samsung,exynosautov920-wakeup-eint",
+ .data = &exynosautov920_wkup_irq_chip },
{ }
};
@@ -655,6 +702,20 @@ static void exynos_pinctrl_suspend_bank(
pr_debug("%s: save mask %#010x\n", bank->name, save->eint_mask);
}
+static void exynosautov920_pinctrl_suspend_bank(
+ struct samsung_pinctrl_drv_data *drvdata,
+ struct samsung_pin_bank *bank)
+{
+ struct exynos_eint_gpio_save *save = bank->soc_priv;
+ void __iomem *regs = bank->eint_base;
+
+ save->eint_con = readl(regs + bank->eint_offset);
+ save->eint_mask = readl(regs + bank->mask_offset);
+
+ pr_debug("%s: save con %#010x\n", bank->name, save->eint_con);
+ pr_debug("%s: save mask %#010x\n", bank->name, save->eint_mask);
+}
+
void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_bank *bank = drvdata->pin_banks;
@@ -662,8 +723,12 @@ void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata)
int i;
for (i = 0; i < drvdata->nr_banks; ++i, ++bank) {
- if (bank->eint_type == EINT_TYPE_GPIO)
- exynos_pinctrl_suspend_bank(drvdata, bank);
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ if (bank->combine)
+ exynosautov920_pinctrl_suspend_bank(drvdata, bank);
+ else
+ exynos_pinctrl_suspend_bank(drvdata, bank);
+ }
else if (bank->eint_type == EINT_TYPE_WKUP) {
if (!irq_chip) {
irq_chip = bank->irq_chip;
@@ -704,14 +769,34 @@ static void exynos_pinctrl_resume_bank(
+ bank->eint_offset);
}
+static void exynosautov920_pinctrl_resume_bank(
+ struct samsung_pinctrl_drv_data *drvdata,
+ struct samsung_pin_bank *bank)
+{
+ struct exynos_eint_gpio_save *save = bank->soc_priv;
+ void __iomem *regs = bank->eint_base;
+
+ pr_debug("%s: con %#010x => %#010x\n", bank->name,
+ readl(regs + bank->eint_offset), save->eint_con);
+ pr_debug("%s: mask %#010x => %#010x\n", bank->name,
+ readl(regs + bank->mask_offset), save->eint_mask);
+
+ writel(save->eint_con, regs + bank->eint_offset);
+ writel(save->eint_mask, regs + bank->mask_offset);
+}
+
void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_pin_bank *bank = drvdata->pin_banks;
int i;
for (i = 0; i < drvdata->nr_banks; ++i, ++bank)
- if (bank->eint_type == EINT_TYPE_GPIO)
- exynos_pinctrl_resume_bank(drvdata, bank);
+ if (bank->eint_type == EINT_TYPE_GPIO) {
+ if (bank->combine)
+ exynosautov920_pinctrl_resume_bank(drvdata, bank);
+ else
+ exynos_pinctrl_resume_bank(drvdata, bank);
+ }
}
static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
index 7bd6d82c9f36..212225a3ed3b 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.h
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
@@ -31,6 +31,7 @@
#define EXYNOS7_WKUP_EMASK_OFFSET 0x900
#define EXYNOS7_WKUP_EPEND_OFFSET 0xA00
#define EXYNOS_SVC_OFFSET 0xB08
+#define EXYNOSAUTOV920_SVC_OFFSET 0xF008
/* helpers to access interrupt service register */
#define EXYNOS_SVC_GROUP_SHIFT 3
@@ -140,6 +141,32 @@
.name = id \
}
+#define EXYNOSV920_PIN_BANK_EINTG(pins, reg, id, offs, mask_offs, pend_offs) \
+ { \
+ .type = &exynos850_bank_type_off, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_GPIO, \
+ .eint_offset = (reg + offs), \
+ .mask_offset = (reg + mask_offs), \
+ .pend_offset = (reg + pend_offs), \
+ .combine = true, \
+ .name = id \
+ }
+
+#define EXYNOSV920_PIN_BANK_EINTW(pins, reg, id, offs, mask_offs, pend_offs) \
+ { \
+ .type = &exynos850_bank_type_alive, \
+ .pctl_offset = reg, \
+ .nr_pins = pins, \
+ .eint_type = EINT_TYPE_WKUP, \
+ .eint_offset = (reg + offs), \
+ .mask_offset = (reg + mask_offs), \
+ .pend_offset = (reg + pend_offs), \
+ .combine = true, \
+ .name = id \
+ }
+
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index e54847040b4a..4066a1e1aff7 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -1105,6 +1105,9 @@ samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d,
bank->eint_type = bdata->eint_type;
bank->eint_mask = bdata->eint_mask;
bank->eint_offset = bdata->eint_offset;
+ bank->mask_offset = bdata->mask_offset;
+ bank->pend_offset = bdata->pend_offset;
+ bank->combine = bdata->combine;
bank->name = bdata->name;
raw_spin_lock_init(&bank->slock);
@@ -1319,6 +1322,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
.data = &exynosautov9_of_data },
{ .compatible = "tesla,fsd-pinctrl",
.data = &fsd_of_data },
+ { .compatible = "samsung,exynosautov920-pinctrl",
+ .data = &exynosautov920_of_data },
#endif
#ifdef CONFIG_PINCTRL_S3C64XX
{ .compatible = "samsung,s3c64xx-pinctrl",
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h
index 9af93e3d8d9f..8151583d4a88 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.h
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.h
@@ -122,6 +122,9 @@ struct samsung_pin_bank_type {
* @eint_type: type of the external interrupt supported by the bank.
* @eint_mask: bit mask of pins which support EINT function.
* @eint_offset: SoC-specific EINT register or interrupt offset of bank.
+ * @mask_offset: SoC-specific EINT mask register offset of bank.
+ * @pend_offset: SoC-specific EINT pend register offset of bank.
+ * @combine: EINT register is combined to the GPIO control register.
* @name: name to be prefixed for each pin in this pin bank.
*/
struct samsung_pin_bank_data {
@@ -133,6 +136,9 @@ struct samsung_pin_bank_data {
enum eint_type eint_type;
u32 eint_mask;
u32 eint_offset;
+ u32 mask_offset;
+ u32 pend_offset;
+ bool combine;
const char *name;
};
@@ -147,6 +153,9 @@ struct samsung_pin_bank_data {
* @eint_type: type of the external interrupt supported by the bank.
* @eint_mask: bit mask of pins which support EINT function.
* @eint_offset: SoC-specific EINT register or interrupt offset of bank.
+ * @mask_offset: SoC-specific EINT mask register offset of bank.
+ * @pend_offset: SoC-specific EINT pend register offset of bank.
+ * @combine: EINT register is combined to the GPIO control register.
* @name: name to be prefixed for each pin in this pin bank.
* @pin_base: starting pin number of the bank.
* @soc_priv: per-bank private data for SoC-specific code.
@@ -169,6 +178,9 @@ struct samsung_pin_bank {
enum eint_type eint_type;
u32 eint_mask;
u32 eint_offset;
+ u32 mask_offset;
+ u32 pend_offset;
+ bool combine;
const char *name;
u32 pin_base;
@@ -350,6 +362,7 @@ extern const struct samsung_pinctrl_of_match_data exynos7_of_data;
extern const struct samsung_pinctrl_of_match_data exynos7885_of_data;
extern const struct samsung_pinctrl_of_match_data exynos850_of_data;
extern const struct samsung_pinctrl_of_match_data exynosautov9_of_data;
+extern const struct samsung_pinctrl_of_match_data exynosautov920_of_data;
extern const struct samsung_pinctrl_of_match_data fsd_of_data;
extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data;
extern const struct samsung_pinctrl_of_match_data s3c2412_of_data;
--
2.42.0
Powered by blists - more mailing lists