linux-kernel - [PATCH v3] serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231031110950.11714-1-rwahl@gmx.de>
Date:   Tue, 31 Oct 2023 12:09:50 +0100
From:   Ronald Wahl <rwahl@....de>
To:     linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Vignesh Raghavendra <vigneshr@...com>,
        Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
        Ronald Wahl <ronald.wahl@...itan.com>, stable@...r.kernel.org
Subject: [PATCH v3] serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt

From: Ronald Wahl <ronald.wahl@...itan.com>

Starting RX DMA on THRI interrupt is too early because TX may not have
finished yet.

This change is inspired by commit 90b8596ac460 ("serial: 8250: Prevent
starting up DMA Rx on THRI interrupt") and fixes DMA issues I had with
an AM62 SoC that is using the 8250 OMAP variant.

Cc: stable@...r.kernel.org
Fixes: c26389f998a8 ("serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs")
Signed-off-by: Ronald Wahl <ronald.wahl@...itan.com>
---
V3: - add Cc: stable@...r.kernel.org

V2: - add Fixes: tag
    - fix author

 drivers/tty/serial/8250/8250_omap.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index c7ab2963040b..f2f59ec6b50b 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1282,10 +1282,11 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)

 	status = serial_port_in(port, UART_LSR);

-	if (priv->habit & UART_HAS_EFR2)
-		am654_8250_handle_rx_dma(up, iir, status);
-	else
-		status = omap_8250_handle_rx_dma(up, iir, status);
+	if ((iir & 0x3f) != UART_IIR_THRI)
+		if (priv->habit & UART_HAS_EFR2)
+			am654_8250_handle_rx_dma(up, iir, status);
+		else
+			status = omap_8250_handle_rx_dma(up, iir, status);

 	serial8250_modem_status(up);
 	if (status & UART_LSR_THRE && up->dma->tx_err) {
--
2.41.0