| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 01 Nov 2023 11:04:11 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: "Rafael J. Wysocki" <rafael@...nel.org>,
Kevin Hilman <khilman@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Pavel Machek <pavel@....cz>, Len Brown <len.brown@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Stanimir Varbanov <stanimir.k.varbanov@...il.com>,
Vikash Garodia <quic_vgarodia@...cinc.com>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: Taniya Das <tdas@....qualcomm.com>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org, linux-media@...r.kernel.org,
Abel Vesa <abel.vesa@...aro.org>,
Jagadeesh Kona <quic_jkona@...cinc.com>
Subject: [PATCH RESEND v3 5/5] venus: pm_helpers: Use
dev_pm_genpd_set_hwmode to switch GDSC mode
From: Jagadeesh Kona <quic_jkona@...cinc.com>
This change demonstrates the use of dev_pm_genpd_set_hwmode API from
video driver to switch the video mvs0 gdsc to SW/HW modes at runtime
based on requirement.
This change adds a new boolean array member vcodec_pmdomains_hwctrl in
venus_resources structure to indicate if GDSC's have HW control support
or not. This data is used in vcodec_control_v4() to check if GDSC has
support to switch to HW control mode and then call dev_pm_genpd_set_hwmode
to switch the GDSC mode.
Before the GDSC HWCTL was available to the consumer, the venus driver
needed to somehow keep the power from collapsing while under the driver
control. The only way to do that was to clear the CORE_PWR_DISABLE bit
(in wrapper POWER_CONTROL register) and, respectively, set it back after
the driver control was completed.
Now, that there is a way to switch the GDSC HW/SW control back and
forth, the CORE_PWR_DISABLE toggling can be dropped.
Signed-off-by: Jagadeesh Kona <quic_jkona@...cinc.com>
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
drivers/media/platform/qcom/venus/core.c | 4 +++
drivers/media/platform/qcom/venus/core.h | 1 +
drivers/media/platform/qcom/venus/pm_helpers.c | 47 +++++++++++---------------
3 files changed, 25 insertions(+), 27 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 054b8e74ba4f..8145062ab6f7 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -706,6 +706,7 @@ static const struct venus_resources sdm845_res_v2 = {
.vcodec1_clks = { "vcodec1_core", "vcodec1_bus" },
.vcodec_clks_num = 2,
.vcodec_pmdomains = { "venus", "vcodec0", "vcodec1" },
+ .vcodec_pmdomains_hwctrl = { false, true, true },
.vcodec_pmdomains_num = 3,
.opp_pmdomain = (const char *[]) { "cx", NULL },
.vcodec_num = 2,
@@ -755,6 +756,7 @@ static const struct venus_resources sc7180_res = {
.vcodec0_clks = { "vcodec0_core", "vcodec0_bus" },
.vcodec_clks_num = 2,
.vcodec_pmdomains = { "venus", "vcodec0" },
+ .vcodec_pmdomains_hwctrl = { false, true },
.vcodec_pmdomains_num = 2,
.opp_pmdomain = (const char *[]) { "cx", NULL },
.vcodec_num = 1,
@@ -812,6 +814,7 @@ static const struct venus_resources sm8250_res = {
.vcodec0_clks = { "vcodec0_core" },
.vcodec_clks_num = 1,
.vcodec_pmdomains = { "venus", "vcodec0" },
+ .vcodec_pmdomains_hwctrl = { false, true },
.vcodec_pmdomains_num = 2,
.opp_pmdomain = (const char *[]) { "mx", NULL },
.vcodec_num = 1,
@@ -871,6 +874,7 @@ static const struct venus_resources sc7280_res = {
.vcodec0_clks = {"vcodec_core", "vcodec_bus"},
.vcodec_clks_num = 2,
.vcodec_pmdomains = { "venus", "vcodec0" },
+ .vcodec_pmdomains_hwctrl = { false, true },
.vcodec_pmdomains_num = 2,
.opp_pmdomain = (const char *[]) { "cx", NULL },
.vcodec_num = 1,
diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
index 4a633261ece4..6d591ecad482 100644
--- a/drivers/media/platform/qcom/venus/core.h
+++ b/drivers/media/platform/qcom/venus/core.h
@@ -73,6 +73,7 @@ struct venus_resources {
const char * const vcodec1_clks[VIDC_VCODEC_CLKS_NUM_MAX];
unsigned int vcodec_clks_num;
const char * const vcodec_pmdomains[VIDC_PMDOMAINS_NUM_MAX];
+ bool vcodec_pmdomains_hwctrl[VIDC_PMDOMAINS_NUM_MAX];
unsigned int vcodec_pmdomains_num;
const char **opp_pmdomain;
unsigned int vcodec_num;
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index a1b127caa90a..9d1dc8366ab0 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -408,35 +408,28 @@ static const struct venus_pm_ops pm_ops_v3 = {
static int vcodec_control_v4(struct venus_core *core, u32 coreid, bool enable)
{
- void __iomem *ctrl, *stat;
- u32 val;
- int ret;
-
- if (IS_V6(core)) {
- ctrl = core->wrapper_base + WRAPPER_CORE_POWER_CONTROL_V6;
- stat = core->wrapper_base + WRAPPER_CORE_POWER_STATUS_V6;
- } else if (coreid == VIDC_CORE_ID_1) {
- ctrl = core->wrapper_base + WRAPPER_VCODEC0_MMCC_POWER_CONTROL;
- stat = core->wrapper_base + WRAPPER_VCODEC0_MMCC_POWER_STATUS;
- } else {
- ctrl = core->wrapper_base + WRAPPER_VCODEC1_MMCC_POWER_CONTROL;
- stat = core->wrapper_base + WRAPPER_VCODEC1_MMCC_POWER_STATUS;
- }
-
- if (enable) {
- writel(0, ctrl);
-
- ret = readl_poll_timeout(stat, val, val & BIT(1), 1, 100);
- if (ret)
- return ret;
- } else {
- writel(1, ctrl);
+ int i, ret = 0;
+ struct device *dev = core->dev;
+ const struct venus_resources *res = core->res;
- ret = readl_poll_timeout(stat, val, !(val & BIT(1)), 1, 100);
- if (ret)
- return ret;
+ for (i = 0; i < res->vcodec_pmdomains_num; i++) {
+ if (res->vcodec_pmdomains_hwctrl[i]) {
+
+ if (!core->pmdomains[i])
+ return -ENODEV;
+
+ /*
+ * enable( true ), switch the gdsc to SW mode
+ * enable( false), switch the gdsc to HW mode
+ */
+ ret = dev_pm_genpd_set_hwmode(core->pmdomains[i], !enable);
+ if (ret) {
+ dev_err(dev, "Failed to switch power-domain:%d to %s mode\n",
+ i, enable ? "SW" : "HW");
+ return ret;
+ }
+ }
}
-
return 0;
}
--
2.34.1
Powered by blists - more mailing lists