[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <65424cd9.5d0a0220.20d9a.fe0f@mx.google.com>
Date: Wed, 1 Nov 2023 13:57:53 +0100
From: Christian Marangi <ansuelsmth@...il.com>
To: Heiner Kallweit <hkallweit1@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Andrew Lunn <andrew@...n.ch>,
Russell King <linux@...linux.org.uk>, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Robert Marko <robimarko@...il.com>
Subject: Re: [net-next PATCH v2 1/2] net: phy: aquantia: add firmware load
support
On Wed, Nov 01, 2023 at 02:01:33PM +0100, Heiner Kallweit wrote:
> On 01.11.2023 13:36, Christian Marangi wrote:
> > From: Robert Marko <robimarko@...il.com>
> >
> > Aquantia PHY-s require firmware to be loaded before they start operating.
> > It can be automatically loaded in case when there is a SPI-NOR connected
> > to Aquantia PHY-s or can be loaded from the host via MDIO.
> >
> > This patch adds support for loading the firmware via MDIO as in most cases
> > there is no SPI-NOR being used to save on cost.
> > Firmware loading code itself is ported from mainline U-boot with cleanups.
> >
> > The firmware has mixed values both in big and little endian.
> > PHY core itself is big-endian but it expects values to be in little-endian.
> > The firmware is little-endian but CRC-16 value for it is stored at the end
> > of firmware in big-endian.
> >
> > It seems the PHY does the conversion internally from firmware that is
> > little-endian to the PHY that is big-endian on using the mailbox
> > but mailbox returns a big-endian CRC-16 to verify the written data
> > integrity.
> >
> > Co-developed-by: Christian Marangi <ansuelsmth@...il.com>
> > Signed-off-by: Robert Marko <robimarko@...il.com>
> > Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
> > ---
> > Changes v2:
> > - Move out of RFC
> > - Address sanity check for offsets
> > - Add additional comments on firmware load check
> > - Fix some typo
> > - Capitalize CRC in comments
> > - Rename load_sysfs to load_fs
> >
>
> To make the driver better maintainable: can the firmware handling code
> be placed in a separate source code file, similar to what has been done
> for the hwmon part?
> If yes, then this could also be the right time to move the aquantia
> driver to an own subdirectory.
>
Sure! Np for me just is it really worth it? hwmod is a bigger one but
this is really a few functions.
Anyway if requested, I will move in v3 the driver to a dedicated
directory and move the function to a separate file!
--
Ansuel
Powered by blists - more mailing lists