[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231101025110.1704543-2-jim.t90615@gmail.com>
Date: Wed, 1 Nov 2023 10:51:08 +0800
From: Jim Liu <jim.t90615@...il.com>
To: JJLIU0@...oton.com, krzysztof.kozlowski+dt@...aro.org,
linus.walleij@...aro.org, andy@...nel.org, benjaminfair@...gle.com,
brgl@...ev.pl, jim.t90615@...il.com, robh@...nel.org
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, openbmc@...ts.ozlabs.org
Subject: [PATCH v7 1/3] dt-bindings: gpio: add NPCM sgpio driver bindings
Add dt-bindings document for the Nuvoton NPCM7xx sgpio driver
Signed-off-by: Jim Liu <jim.t90615@...il.com>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Reviewed-by: Rob Herring <robh@...nel.org>
---
Changes for v7:
- no change
Changes for v6:
- Drop quotes for $ref
- Add and drop '|' for description
- Add space after 'exposed.'
- remove status
Changes for v5:
- remove bus bus-frequency
- modify in/out description
Changes for v4:
- modify in/out property
- modify bus-frequency property
Changes for v3:
- modify description
- modify in/out property name
Changes for v2:
- modify description
---
.../bindings/gpio/nuvoton,sgpio.yaml | 86 +++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
new file mode 100644
index 000000000000..84e0dbcb066c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton SGPIO controller
+
+maintainers:
+ - Jim LIU <JJLIU0@...oton.com>
+
+description: |
+ This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC.
+ Nuvoton NPCM7xx SGPIO module is combine serial to parallel IC (HC595)
+ and parallel to serial IC (HC165), and use APB3 clock to control it.
+ This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
+ NPCM7xx/NPCM8xx have two sgpio module each module can support up
+ to 64 output pins,and up to 64 input pin, the pin is only for gpi or gpo.
+ GPIO pins have sequential, First half is gpo and second half is gpi.
+ GPIO pins can be programmed to support the following options
+ - Support interrupt option for each input port and various interrupt
+ sensitivity option (level-high, level-low, edge-high, edge-low)
+ - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
+ nuvoton,input-ngpios GPIO lines is only for gpi.
+ nuvoton,output-ngpios GPIO lines is only for gpo.
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,npcm750-sgpio
+ - nuvoton,npcm845-sgpio
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ nuvoton,input-ngpios:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The numbers of GPIO's exposed. GPIO lines is only for gpi.
+ minimum: 0
+ maximum: 64
+
+ nuvoton,output-ngpios:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The numbers of GPIO's exposed. GPIO lines is only for gpo.
+ minimum: 0
+ maximum: 64
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - interrupts
+ - nuvoton,input-ngpios
+ - nuvoton,output-ngpios
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ gpio8: gpio@...000 {
+ compatible = "nuvoton,npcm750-sgpio";
+ reg = <0x101000 0x200>;
+ clocks = <&clk NPCM7XX_CLK_APB3>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ nuvoton,input-ngpios = <64>;
+ nuvoton,output-ngpios = <64>;
+ };
--
2.25.1
Powered by blists - more mailing lists