linux-kernel - [PATCH] net: phy: at803x: add QCA8084 ethernet phy support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20231103123538.15735-1-quic_luoj@quicinc.com>
Date:   Fri, 3 Nov 2023 20:35:37 +0800
From:   Luo Jie <quic_luoj@...cinc.com>
To:     <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
        <davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
        <pabeni@...hat.com>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH] net: phy: at803x: add QCA8084 ethernet phy support

Add qca8084 PHY support, which is four-port PHY with maximum
link capability 2.5G, the features of each port is almost same
as QCA8081 and slave seed config is not needed.

There are some initialization configurations needed.
1. Configuring qca8084 related initializations including
MSE detect threshold and ADC clock edge invert.
2. Add the additional configurations for the CDT feature.

Signed-off-by: Luo Jie <quic_luoj@...cinc.com>
---
 drivers/net/phy/at803x.c | 40 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 37 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 37fb033e1c29..4124eb76d835 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -176,6 +176,8 @@
 #define AT8030_PHY_ID_MASK			0xffffffef
 
 #define QCA8081_PHY_ID				0x004dd101
+#define QCA8081_PHY_MASK			0xffffff00
+#define QCA8084_PHY_ID				0x004dd180
 
 #define QCA8327_A_PHY_ID			0x004dd033
 #define QCA8327_B_PHY_ID			0x004dd034
@@ -279,6 +281,15 @@
 #define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL	0x9072
 #define QCA8081_PHY_FIFO_RSTN			BIT(11)
 
+/* QCA8084 ADC clock edge */
+#define QCA8084_ADC_CLK_SEL			0x8b80
+#define QCA8084_ADC_CLK_SEL_ACLK		GENMASK(7, 4)
+#define QCA8084_ADC_CLK_SEL_ACLK_FALL		0xf
+#define QCA8084_ADC_CLK_SEL_ACLK_RISE		0x0
+
+#define QCA8084_MSE_THRESHOLD			0x800a
+#define QCA8084_MSE_THRESHOLD_2P5G_VAL		0x51c6
+
 MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
@@ -1760,6 +1771,9 @@ static bool qca808x_is_prefer_master(struct phy_device *phydev)
 
 static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev)
 {
+	if (phydev->phy_id == QCA8084_PHY_ID)
+		return false;
+
 	return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported);
 }
 
@@ -1767,6 +1781,20 @@ static int qca808x_config_init(struct phy_device *phydev)
 {
 	int ret;
 
+	if (phydev->phy_id == QCA8084_PHY_ID) {
+		/* Invert ADC clock edge */
+		ret = at803x_debug_reg_mask(phydev, QCA8084_ADC_CLK_SEL,
+					    QCA8084_ADC_CLK_SEL_ACLK,
+					    FIELD_PREP(QCA8084_ADC_CLK_SEL_ACLK,
+						       QCA8084_ADC_CLK_SEL_ACLK_FALL));
+		if (ret < 0)
+			return ret;
+
+		/* Adjust MSE threshold value to avoid link issue with some link partner */
+		return phy_write_mmd(phydev, MDIO_MMD_PMAPMD,
+				QCA8084_MSE_THRESHOLD, QCA8084_MSE_THRESHOLD_2P5G_VAL);
+	}
+
 	/* Active adc&vga on 802.3az for the link 1000M and 100M */
 	ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7,
 			QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN);
@@ -1958,6 +1986,11 @@ static int qca808x_cable_test_start(struct phy_device *phydev)
 	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807a, 0xc060);
 	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807e, 0xb060);
 
+	if (phydev->phy_id == QCA8084_PHY_ID) {
+		phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8075, 0xa060);
+		phy_write_mmd(phydev, MDIO_MMD_PCS, 0x807f, 0x1eb0);
+	}
+
 	return 0;
 }
 
@@ -2207,8 +2240,9 @@ static struct phy_driver at803x_driver[] = {
 	.resume			= qca83xx_resume,
 }, {
 	/* Qualcomm QCA8081 */
-	PHY_ID_MATCH_EXACT(QCA8081_PHY_ID),
-	.name			= "Qualcomm QCA8081",
+	.phy_id			= QCA8081_PHY_ID,
+	.phy_id_mask		= QCA8081_PHY_MASK,
+	.name			= "Qualcomm QCA808X",
 	.flags			= PHY_POLL_CABLE_TEST,
 	.probe			= at803x_probe,
 	.config_intr		= at803x_config_intr,
@@ -2241,7 +2275,7 @@ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
 	{ PHY_ID_MATCH_EXACT(QCA8327_A_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(QCA8327_B_PHY_ID) },
 	{ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) },
-	{ PHY_ID_MATCH_EXACT(QCA8081_PHY_ID) },
+	{ QCA8081_PHY_ID, QCA8081_PHY_MASK},
 	{ }
 };
 
-- 
2.42.0