| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231103142822abbca0ed@mail.local>
Date: Fri, 3 Nov 2023 15:28:22 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Carlos Menin <menin@...losaurelio.net>
Cc: linux-rtc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-hwmon@...r.kernel.org,
Alessandro Zummo <a.zummo@...ertech.it>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Sergio Prado <sergio.prado@...abworks.com>
Subject: Re: [PATCH v2 1/2] rtc: add pcf85053a
Hello Carlos,
On 03/11/2023 09:51:05-0300, Carlos Menin wrote:
> +struct pcf85053a {
> + struct rtc_device *rtc;
> + struct regmap *regmap;
> + struct regmap *regmap_nvmem;
> +};
> +
> +struct pcf85053a_config {
> + struct regmap_config regmap;
> + struct regmap_config regmap_nvmem;
> +};
> +
> +static int pcf85053a_read_offset(struct device *dev, long *offset)
> +{
> + struct pcf85053a *pcf85053a = dev_get_drvdata(dev);
> + long val;
> + u32 reg_offset, reg_oscillator;
> + int ret;
> +
> + ret = regmap_read(pcf85053a->regmap, REG_OFFSET, ®_offset);
> + if (ret)
> + return -EIO;
Why do you change the error returned by regmap?
> +
> + ret = regmap_read(pcf85053a->regmap, REG_OSCILLATOR, ®_oscillator);
> + if (ret)
> + return -EIO;
> +
> + val = sign_extend32(reg_offset, 7);
> +
> + if (reg_oscillator & REG_OSC_OFFM)
> + *offset = val * OFFSET_STEP1;
> + else
> + *offset = val * OFFSET_STEP0;
> +
> + return 0;
> +}
> +
> +static int pcf85053a_set_offset(struct device *dev, long offset)
> +{
> + struct pcf85053a *pcf85053a = dev_get_drvdata(dev);
> + s8 mode0, mode1, reg_offset;
> + unsigned int ret, error0, error1;
> +
> + if (offset > OFFSET_STEP0 * 127)
> + return -ERANGE;
> + if (offset < OFFSET_STEP0 * -128)
> + return -ERANGE;
> +
> + ret = regmap_set_bits(pcf85053a->regmap, REG_ACCESS, REG_ACCESS_XCLK);
> + if (ret)
> + return -EIO;
> +
> + mode0 = DIV_ROUND_CLOSEST(offset, OFFSET_STEP0);
> + mode1 = DIV_ROUND_CLOSEST(offset, OFFSET_STEP1);
> +
> + error0 = abs(offset - (mode0 * OFFSET_STEP0));
> + error1 = abs(offset - (mode1 * OFFSET_STEP1));
> + if (error0 < error1) {
> + reg_offset = mode0;
> + ret = regmap_clear_bits(pcf85053a->regmap, REG_OSCILLATOR,
> + REG_OSC_OFFM);
> + } else {
> + reg_offset = mode1;
> + ret = regmap_set_bits(pcf85053a->regmap, REG_OSCILLATOR,
> + REG_OSC_OFFM);
> + }
> + if (ret)
> + return -EIO;
> +
> + ret = regmap_write(pcf85053a->regmap, REG_OFFSET, reg_offset);
> +
> + return ret;
> +}
> +
> +static int pcf85053a_rtc_check_reliability(struct device *dev, u8 status_reg)
> +{
> + int ret = 0;
> +
> + if (status_reg & REG_STATUS_CIF) {
> + dev_warn(dev, "tamper detected,"
> + " date/time is not reliable\n");
You should not split strings. Also, I don't think most of the messages
are actually useful as the end user doesn't have any specific action
after seeing it. You should probably drop them.
I don't think CIF means the time is not correct anymore.
> + ret = -EINVAL;
> + }
> +
> + if (status_reg & REG_STATUS_OF) {
> + dev_warn(dev, "oscillator fail detected,"
> + " date/time is not reliable.\n");
> + ret = -EINVAL;
> + }
> +
> + if (status_reg & REG_STATUS_RTCF) {
> + dev_warn(dev, "power loss detected,"
> + " date/time is not reliable.\n");
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int pcf85053a_rtc_read_time(struct device *dev, struct rtc_time *tm)
> +{
> + struct pcf85053a *pcf85053a = dev_get_drvdata(dev);
> + u8 buf[REG_STATUS + 1];
> + int ret, len = sizeof(buf);
> +
> + ret = regmap_bulk_read(pcf85053a->regmap, REG_SECS, buf, len);
> + if (ret) {
> + dev_err(dev, "%s: error %d\n", __func__, ret);
> + return ret;
> + }
> +
> + ret = pcf85053a_rtc_check_reliability(dev, buf[REG_STATUS]);
> + if (ret)
> + return ret;
> +
> + tm->tm_year = buf[REG_YEARS];
> + /* adjust for 1900 base of rtc_time */
> + tm->tm_year += 100;
> +
> + tm->tm_wday = (buf[REG_WEEKDAYS] - 1) & 7; /* 1 - 7 */
> + tm->tm_sec = buf[REG_SECS];
> + tm->tm_min = buf[REG_MINUTES];
> + tm->tm_hour = buf[REG_HOURS];
> + tm->tm_mday = buf[REG_DAYS];
> + tm->tm_mon = buf[REG_MONTHS] - 1; /* 1 - 12 */
Those comments are not useful.
> +
> + return 0;
> +}
> +
> +static ssize_t attr_flag_clear(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count,
> + u8 reg, u8 flag)
> +{
> + struct pcf85053a *pcf85053a = dev_get_drvdata(dev->parent);
> + int ret;
> +
> + (void)attr;
> + (void)buf;
> + (void)count;
> +
> + ret = regmap_clear_bits(pcf85053a->regmap, reg, flag);
> + if (ret)
> + return -EIO;
> +
> + return count;
> +}
> +
> +static ssize_t attr_flag_read(struct device *dev,
> + struct device_attribute *attr,
> + char *buf,
> + u8 reg, u8 flag)
> +{
> + struct pcf85053a *pcf85053a = dev_get_drvdata(dev->parent);
> + unsigned int status, val;
> + int ret;
> +
> + (void)attr;
> + ret = regmap_read(pcf85053a->regmap, reg, &status);
> + if (ret)
> + return -EIO;
> +
> + val = (status & flag) != 0;
> +
> + return sprintf(buf, "%u\n", val);
> +}
> +
> +/* flags that can be read or written to be cleared */
> +#define PCF85053A_ATTR_FLAG_RWC(name, reg, flag) \
> + static ssize_t name ## _store( \
> + struct device *dev, \
> + struct device_attribute *attr, \
> + const char *buf, \
> + size_t count) \
> + { \
> + return attr_flag_clear(dev, attr, buf, count, \
> + REG_ ## reg, REG_ ## reg ## _ ## flag); \
> + } \
> + static ssize_t name ## _show( \
> + struct device *dev, \
> + struct device_attribute *attr, \
> + char *buf) \
> + { \
> + return attr_flag_read(dev, attr, buf, \
> + REG_ ## reg, REG_ ## reg ## _ ## flag); \
> + } \
> + static DEVICE_ATTR_RW(name)
> +
> +PCF85053A_ATTR_FLAG_RWC(rtc_fail, STATUS, RTCF);
> +PCF85053A_ATTR_FLAG_RWC(oscillator_fail, STATUS, OF);
> +PCF85053A_ATTR_FLAG_RWC(rtc_clear, STATUS, CIF);
> +
> +static struct attribute *pcf85053a_attrs_flags[] = {
> + &dev_attr_rtc_fail.attr,
> + &dev_attr_oscillator_fail.attr,
> + &dev_attr_rtc_clear.attr,
> + 0,
> +};
Don't add undocumented sysfs files. Also, You must not allow userspace
to clear those flags without setting the time properly.
> +static void pcf85053a_set_drive_control(struct device *dev, u8 *reg_ctrl)
> +{
> + int ret;
> + const char *val;
> + u8 regval;
> +
> + ret = of_property_read_string(dev->of_node, "nxp,quartz-drive-control",
> + &val);
This property should rather be "nxp,quartz-drive".
> + if (ret) {
> + dev_warn(dev, "failed to read nxp,quartz-drive-control property,"
> + " assuming 'normal' drive");
> + val = "normal";
> + }
> +
> + if (!strcmp(val, "normal")) {
> + regval = 0;
> + } else if (!strcmp(val, "low")) {
> + regval = 1;
> + } else if (!strcmp(val, "high")) {
> + regval = 2;
> + } else {
> + dev_warn(dev, "invalid nxp,quartz-drive-control value: %s,"
> + " assuming 'normal' drive", val);
> + regval = 0;
> + }
> +
> + *reg_ctrl |= (regval << 2);
2 needs a define, what about using FIELD_PREP?
> +}
> +
> +static void pcf85053a_set_low_jitter(struct device *dev, u8 *reg_ctrl)
> +{
> + bool val;
> + u8 regval;
> +
> + val = of_property_read_bool(dev->of_node, "nxp,low-jitter-mode");
Bool properties don't work well with RTC because with this, there is now
way to enable the normal mode.
> +
> + regval = val ? 1 : 0;
> + *reg_ctrl |= (regval << 4);
4 also needs a define
> +}
> +
> +static void pcf85053a_set_clk_inverted(struct device *dev, u8 *reg_ctrl)
> +{
> + bool val;
> + u8 regval;
> +
> + val = of_property_read_bool(dev->of_node, "nxp,clk-inverted");
> +
> + regval = val ? 1 : 0;
> + *reg_ctrl |= (regval << 7);
Ditto
> +}
> +
> +static int pcf85053a_probe(struct i2c_client *client)
> +{
> + int ret;
> + struct pcf85053a *pcf85053a;
> + const struct pcf85053a_config *config = &pcf85053a_config;
> + u8 reg_ctrl;
> +
> + pcf85053a = devm_kzalloc(&client->dev, sizeof(*pcf85053a), GFP_KERNEL);
> + if (!pcf85053a) {
> + dev_err(&client->dev, "failed to allocate device: no memory");
> + return -ENOMEM;
> + }
> +
> + pcf85053a->regmap = devm_regmap_init_i2c(client, &config->regmap);
> + if (IS_ERR(pcf85053a->regmap)) {
> + dev_err(&client->dev, "failed to allocate regmap: %ld\n",
> + PTR_ERR(pcf85053a->regmap));
> + return PTR_ERR(pcf85053a->regmap);
> + }
> +
> + i2c_set_clientdata(client, pcf85053a);
> +
> + pcf85053a->rtc = devm_rtc_allocate_device(&client->dev);
> + if (IS_ERR(pcf85053a->rtc)) {
> + dev_err(&client->dev, "failed to allocate rtc: %ld\n",
> + PTR_ERR(pcf85053a->rtc));
> + return PTR_ERR(pcf85053a->rtc);
> + }
> +
> + pcf85053a->rtc->ops = &pcf85053a_rtc_ops;
> + pcf85053a->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + pcf85053a->rtc->range_max = RTC_TIMESTAMP_END_2099;
> +
> + reg_ctrl = REG_CTRL_DM | REG_CTRL_HF | REG_CTRL_CIE;
CIE enables an interrupt but you never use interrupts.
> + pcf85053a_set_load_capacitance(&client->dev, ®_ctrl);
> + pcf85053a_set_drive_control(&client->dev, ®_ctrl);
> + pcf85053a_set_low_jitter(&client->dev, ®_ctrl);
> + pcf85053a_set_clk_inverted(&client->dev, ®_ctrl);
> +
> + ret = regmap_write(pcf85053a->regmap, REG_CTRL, reg_ctrl);
> + if (ret) {
> + dev_err(&client->dev, "failed to configure rtc: %d\n", ret);
> + return ret;
> + }
> +
> + ret = rtc_add_group(pcf85053a->rtc, &pcf85053a_attr_group);
> + if (ret) {
> + dev_err(&client->dev, "failed to add sysfs entry: %d\n", ret);
> + return ret;
> + }
> +
> + ret = devm_rtc_register_device(pcf85053a->rtc);
> + if (ret) {
> + dev_err(&client->dev, "failed to register rtc: %d\n", ret);
> + return ret;
> + }
> +
> + ret = pcf85053a_add_nvmem(client, pcf85053a);
> + if (ret) {
> + dev_err(&client->dev, "failed to register nvmem: %d\n", ret);
> + return ret;
probe must not fail after devm_rtc_register_device
> + }
> +
> + ret = pcf85053a_hwmon_register(&client->dev, client->name);
> + if (ret)
> + dev_err(&client->dev, "failed to register hwmon: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static const __maybe_unused struct of_device_id dev_ids[] = {
> + { .compatible = "nxp,pcf85053a", .data = &pcf85053a_config },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, dev_ids);
> +
> +static struct i2c_driver pcf85053a_driver = {
> + .driver = {
> + .name = "pcf85053a",
> + .of_match_table = of_match_ptr(dev_ids),
> + },
> + .probe_new = &pcf85053a_probe,
> +};
> +
> +module_i2c_driver(pcf85053a_driver);
> +
> +MODULE_AUTHOR("Carlos Menin <menin@...losaurelio.net>");
> +MODULE_DESCRIPTION("PCF85053A I2C RTC driver");
> +MODULE_LICENSE("GPL");
> --
> 2.34.1
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists