lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231103201831.1037416-8-andriy.shevchenko@linux.intel.com>
Date:   Fri,  3 Nov 2023 22:18:22 +0200
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Jani Nikula <jani.nikula@...el.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        intel-gfx@...ts.freedesktop.org, dri-devel@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Cc:     Jani Nikula <jani.nikula@...ux.intel.com>,
        Joonas Lahtinen <joonas.lahtinen@...ux.intel.com>,
        Rodrigo Vivi <rodrigo.vivi@...el.com>,
        Tvrtko Ursulin <tvrtko.ursulin@...ux.intel.com>,
        David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        Hans de Goede <hdegoede@...hat.com>,
        Andi Shyti <andi.shyti@...ux.intel.com>
Subject: [PATCH v4 07/16] drm/i915/dsi: Get rid of redundant 'else'

In the snippets like the following

	if (...)
		return / goto / break / continue ...;
	else
		...

the 'else' is redundant. Get rid of it.

Reviewed-by: Andi Shyti <andi.shyti@...ux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Acked-by: Jani Nikula <jani.nikula@...el.com>
---
 drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 58 ++++++++++----------
 1 file changed, 28 insertions(+), 30 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
index 290a112f1b63..4ed5ede9ec5b 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
@@ -142,7 +142,7 @@ static enum port intel_dsi_seq_port_to_port(struct intel_dsi *intel_dsi,
 	if (seq_port) {
 		if (intel_dsi->ports & BIT(PORT_B))
 			return PORT_B;
-		else if (intel_dsi->ports & BIT(PORT_C))
+		if (intel_dsi->ports & BIT(PORT_C))
 			return PORT_C;
 	}
 
@@ -670,8 +670,8 @@ static const char *sequence_name(enum mipi_seq seq_id)
 {
 	if (seq_id < ARRAY_SIZE(seq_name) && seq_name[seq_id])
 		return seq_name[seq_id];
-	else
-		return "(unknown)";
+
+	return "(unknown)";
 }
 
 static void intel_dsi_vbt_exec(struct intel_dsi *intel_dsi,
@@ -865,36 +865,34 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 	 * multiply by 100 to preserve remainder
 	 */
 	if (intel_dsi->video_mode == BURST_MODE) {
-		if (mipi_config->target_burst_mode_freq) {
-			u32 bitrate = intel_dsi_bitrate(intel_dsi);
+		u32 bitrate;
 
-			/*
-			 * Sometimes the VBT contains a slightly lower clock,
-			 * then the bitrate we have calculated, in this case
-			 * just replace it with the calculated bitrate.
-			 */
-			if (mipi_config->target_burst_mode_freq < bitrate &&
-			    intel_fuzzy_clock_check(
-					mipi_config->target_burst_mode_freq,
-					bitrate))
-				mipi_config->target_burst_mode_freq = bitrate;
-
-			if (mipi_config->target_burst_mode_freq < bitrate) {
-				drm_err(&dev_priv->drm,
-					"Burst mode freq is less than computed\n");
-				return false;
-			}
-
-			burst_mode_ratio = DIV_ROUND_UP(
-				mipi_config->target_burst_mode_freq * 100,
-				bitrate);
-
-			intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
-		} else {
-			drm_err(&dev_priv->drm,
-				"Burst mode target is not set\n");
+		if (mipi_config->target_burst_mode_freq == 0) {
+			drm_err(&dev_priv->drm, "Burst mode target is not set\n");
 			return false;
 		}
+
+		bitrate = intel_dsi_bitrate(intel_dsi);
+
+		/*
+		 * Sometimes the VBT contains a slightly lower clock, then
+		 * the bitrate we have calculated, in this case just replace it
+		 * with the calculated bitrate.
+		 */
+		if (mipi_config->target_burst_mode_freq < bitrate &&
+		    intel_fuzzy_clock_check(mipi_config->target_burst_mode_freq,
+					    bitrate))
+			mipi_config->target_burst_mode_freq = bitrate;
+
+		if (mipi_config->target_burst_mode_freq < bitrate) {
+			drm_err(&dev_priv->drm, "Burst mode freq is less than computed\n");
+			return false;
+		}
+
+		burst_mode_ratio =
+			DIV_ROUND_UP(mipi_config->target_burst_mode_freq * 100, bitrate);
+
+		intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
 	} else
 		burst_mode_ratio = 100;
 
-- 
2.40.0.1.gaa8946217a0b

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ