| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20231106054305.GC2474@thinkpad>
Date: Mon, 6 Nov 2023 11:13:05 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Qiang Yu <quic_qianyu@...cinc.com>
Cc: quic_jhugo@...cinc.com, mhi@...ts.linux.dev,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
quic_cang@...cinc.com, quic_mrana@...cinc.com
Subject: Re: [PATCH 1/2] bus: mhi: host: Add a separate timeout parameter for
waiting ready
On Mon, Nov 06, 2023 at 11:42:51AM +0800, Qiang Yu wrote:
> Some devices(eg. SDX75) take longer than expected (default, 8 seconds) to
> set ready after reboot. Hence add optional ready timeout parameter and pass
> the appropriate timeout value to mhi_poll_reg_field() to wait enough for
> device ready as part of power up sequence.
>
> Signed-off-by: Qiang Yu <quic_qianyu@...cinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
- Mani
> ---
> drivers/bus/mhi/host/init.c | 1 +
> drivers/bus/mhi/host/internal.h | 2 +-
> drivers/bus/mhi/host/main.c | 5 +++--
> drivers/bus/mhi/host/pm.c | 24 +++++++++++++++++-------
> include/linux/mhi.h | 4 ++++
> 5 files changed, 26 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
> index f78aefd..65ceac1 100644
> --- a/drivers/bus/mhi/host/init.c
> +++ b/drivers/bus/mhi/host/init.c
> @@ -881,6 +881,7 @@ static int parse_config(struct mhi_controller *mhi_cntrl,
> if (!mhi_cntrl->timeout_ms)
> mhi_cntrl->timeout_ms = MHI_TIMEOUT_MS;
>
> + mhi_cntrl->ready_timeout_ms = config->ready_timeout_ms;
> mhi_cntrl->bounce_buf = config->use_bounce_buf;
> mhi_cntrl->buffer_len = config->buf_len;
> if (!mhi_cntrl->buffer_len)
> diff --git a/drivers/bus/mhi/host/internal.h b/drivers/bus/mhi/host/internal.h
> index 2e139e7..30ac415 100644
> --- a/drivers/bus/mhi/host/internal.h
> +++ b/drivers/bus/mhi/host/internal.h
> @@ -321,7 +321,7 @@ int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
> u32 *out);
> int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,
> void __iomem *base, u32 offset, u32 mask,
> - u32 val, u32 delayus);
> + u32 val, u32 delayus, u32 timeout_ms);
> void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
> u32 offset, u32 val);
> int __must_check mhi_write_reg_field(struct mhi_controller *mhi_cntrl,
> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
> index dcf627b..6cf1145 100644
> --- a/drivers/bus/mhi/host/main.c
> +++ b/drivers/bus/mhi/host/main.c
> @@ -40,10 +40,11 @@ int __must_check mhi_read_reg_field(struct mhi_controller *mhi_cntrl,
>
> int __must_check mhi_poll_reg_field(struct mhi_controller *mhi_cntrl,
> void __iomem *base, u32 offset,
> - u32 mask, u32 val, u32 delayus)
> + u32 mask, u32 val, u32 delayus,
> + u32 timeout_ms)
> {
> int ret;
> - u32 out, retry = (mhi_cntrl->timeout_ms * 1000) / delayus;
> + u32 out, retry = (timeout_ms * 1000) / delayus;
>
> while (retry--) {
> ret = mhi_read_reg_field(mhi_cntrl, base, offset, mask, &out);
> diff --git a/drivers/bus/mhi/host/pm.c b/drivers/bus/mhi/host/pm.c
> index 8a4362d..a2f2fee 100644
> --- a/drivers/bus/mhi/host/pm.c
> +++ b/drivers/bus/mhi/host/pm.c
> @@ -163,6 +163,7 @@ int mhi_ready_state_transition(struct mhi_controller *mhi_cntrl)
> enum mhi_pm_state cur_state;
> struct device *dev = &mhi_cntrl->mhi_dev->dev;
> u32 interval_us = 25000; /* poll register field every 25 milliseconds */
> + u32 timeout_ms;
> int ret, i;
>
> /* Check if device entered error state */
> @@ -173,14 +174,18 @@ int mhi_ready_state_transition(struct mhi_controller *mhi_cntrl)
>
> /* Wait for RESET to be cleared and READY bit to be set by the device */
> ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
> - MHICTRL_RESET_MASK, 0, interval_us);
> + MHICTRL_RESET_MASK, 0, interval_us,
> + mhi_cntrl->timeout_ms);
> if (ret) {
> dev_err(dev, "Device failed to clear MHI Reset\n");
> return ret;
> }
>
> + timeout_ms = mhi_cntrl->ready_timeout_ms ?
> + mhi_cntrl->ready_timeout_ms : mhi_cntrl->timeout_ms;
> ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHISTATUS,
> - MHISTATUS_READY_MASK, 1, interval_us);
> + MHISTATUS_READY_MASK, 1, interval_us,
> + timeout_ms);
> if (ret) {
> dev_err(dev, "Device failed to enter MHI Ready\n");
> return ret;
> @@ -479,7 +484,7 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
>
> /* Wait for the reset bit to be cleared by the device */
> ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
> - MHICTRL_RESET_MASK, 0, 25000);
> + MHICTRL_RESET_MASK, 0, 25000, mhi_cntrl->timeout_ms);
> if (ret)
> dev_err(dev, "Device failed to clear MHI Reset\n");
>
> @@ -492,8 +497,8 @@ static void mhi_pm_disable_transition(struct mhi_controller *mhi_cntrl)
> if (!MHI_IN_PBL(mhi_get_exec_env(mhi_cntrl))) {
> /* wait for ready to be set */
> ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs,
> - MHISTATUS,
> - MHISTATUS_READY_MASK, 1, 25000);
> + MHISTATUS, MHISTATUS_READY_MASK,
> + 1, 25000, mhi_cntrl->timeout_ms);
> if (ret)
> dev_err(dev, "Device failed to enter READY state\n");
> }
> @@ -1111,7 +1116,8 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
> if (state == MHI_STATE_SYS_ERR) {
> mhi_set_mhi_state(mhi_cntrl, MHI_STATE_RESET);
> ret = mhi_poll_reg_field(mhi_cntrl, mhi_cntrl->regs, MHICTRL,
> - MHICTRL_RESET_MASK, 0, interval_us);
> + MHICTRL_RESET_MASK, 0, interval_us,
> + mhi_cntrl->timeout_ms);
> if (ret) {
> dev_info(dev, "Failed to reset MHI due to syserr state\n");
> goto error_exit;
> @@ -1202,14 +1208,18 @@ EXPORT_SYMBOL_GPL(mhi_power_down);
> int mhi_sync_power_up(struct mhi_controller *mhi_cntrl)
> {
> int ret = mhi_async_power_up(mhi_cntrl);
> + u32 timeout_ms;
>
> if (ret)
> return ret;
>
> + /* Some devices need more time to set ready during power up */
> + timeout_ms = mhi_cntrl->ready_timeout_ms ?
> + mhi_cntrl->ready_timeout_ms : mhi_cntrl->timeout_ms;
> wait_event_timeout(mhi_cntrl->state_event,
> MHI_IN_MISSION_MODE(mhi_cntrl->ee) ||
> MHI_PM_IN_ERROR_STATE(mhi_cntrl->pm_state),
> - msecs_to_jiffies(mhi_cntrl->timeout_ms));
> + msecs_to_jiffies(timeout_ms));
>
> ret = (MHI_IN_MISSION_MODE(mhi_cntrl->ee)) ? 0 : -ETIMEDOUT;
> if (ret)
> diff --git a/include/linux/mhi.h b/include/linux/mhi.h
> index 039943e..d0f9b522 100644
> --- a/include/linux/mhi.h
> +++ b/include/linux/mhi.h
> @@ -266,6 +266,7 @@ struct mhi_event_config {
> * struct mhi_controller_config - Root MHI controller configuration
> * @max_channels: Maximum number of channels supported
> * @timeout_ms: Timeout value for operations. 0 means use default
> + * @ready_timeout_ms: Timeout value for waiting device to be ready (optional)
> * @buf_len: Size of automatically allocated buffers. 0 means use default
> * @num_channels: Number of channels defined in @ch_cfg
> * @ch_cfg: Array of defined channels
> @@ -277,6 +278,7 @@ struct mhi_event_config {
> struct mhi_controller_config {
> u32 max_channels;
> u32 timeout_ms;
> + u32 ready_timeout_ms;
> u32 buf_len;
> u32 num_channels;
> const struct mhi_channel_config *ch_cfg;
> @@ -330,6 +332,7 @@ struct mhi_controller_config {
> * @pm_mutex: Mutex for suspend/resume operation
> * @pm_lock: Lock for protecting MHI power management state
> * @timeout_ms: Timeout in ms for state transitions
> + * @ready_timeout_ms: Timeout in ms for waiting device to be ready (optional)
> * @pm_state: MHI power management state
> * @db_access: DB access states
> * @ee: MHI device execution environment
> @@ -419,6 +422,7 @@ struct mhi_controller {
> struct mutex pm_mutex;
> rwlock_t pm_lock;
> u32 timeout_ms;
> + u32 ready_timeout_ms;
> u32 pm_state;
> u32 db_access;
> enum mhi_ee_type ee;
> --
> 2.7.4
>
>
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists