[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1jy1fb9n7d.fsf@starbuckisacylon.baylibre.com>
Date: Mon, 06 Nov 2023 11:41:48 +0100
From: Jerome Brunet <jbrunet@...libre.com>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Tomeu Vizoso <tomeu@...euvizoso.net>,
linux-kernel@...r.kernel.org
Cc: Lucas Stach <l.stach@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kevin Hilman <khilman@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"moderated list:ARM/Amlogic Meson SoC support"
<linux-arm-kernel@...ts.infradead.org>,
"open list:ARM/Amlogic Meson SoC support"
<linux-amlogic@...ts.infradead.org>
Subject: Re: [PATCH RESEND] arm64: dts: VIM3: Set the rates of the clocks
for the NPU
On Mon 06 Nov 2023 at 10:26, Neil Armstrong <neil.armstrong@...aro.org> wrote:
> On 06/11/2023 10:22, Tomeu Vizoso wrote:
patch title is misleading. It does not target the vim3 only but all g12
and sm1 HWs.
It should start with "arm64: dts: amlogic: g12: " instead
>> Otherwise they are left at 24MHz and the NPU runs very slowly.
>> Signed-off-by: Tomeu Vizoso <tomeu@...euvizoso.net>
>> Suggested-by: Lucas Stach <l.stach@...gutronix.de>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +++
>> 1 file changed, 3 insertions(+)
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> index ff68b911b729..9d5eab6595d0 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> @@ -2502,6 +2502,9 @@ npu: npu@...00000 {
>> clocks = <&clkc CLKID_NNA_CORE_CLK>,
>> <&clkc CLKID_NNA_AXI_CLK>;
>> clock-names = "core", "bus";
>> + assigned-clocks = <&clkc CLKID_NNA_CORE_CLK>,
>> + <&clkc CLKID_NNA_AXI_CLK>;
>> + assigned-clock-rates = <800000000>, <800000000>;
>> resets = <&reset RESET_NNA>;
>> status = "disabled";
>> };
>
> Reviewed-by: Neil Armstrong <neil.armstrong@...aro.org>
Powered by blists - more mailing lists