[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1699332374-9324-3-git-send-email-cang@qti.qualcomm.com>
Date: Mon, 6 Nov 2023 20:46:08 -0800
From: Can Guo <cang@....qualcomm.com>
To: quic_cang@...cinc.com, bvanassche@....org, mani@...nel.org,
stanley.chu@...iatek.com, adrian.hunter@...el.com,
beanhuo@...ron.com, avri.altman@....com, junwoo80.lee@...sung.com,
martin.petersen@...cle.com
Cc: linux-scsi@...r.kernel.org,
"Bao D . Nguyen" <quic_nguyenb@...cinc.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
linux-arm-msm@...r.kernel.org (open list:ARM/QUALCOMM SUPPORT),
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2 2/7] scsi: ufs: ufs-qcom: Setup host power mode during init
From: Can Guo <quic_cang@...cinc.com>
Setup host power mode and its limitations during UFS host driver init to
avoid repetitive work during every power mode change.
Co-developed-by: Bao D. Nguyen <quic_nguyenb@...cinc.com>
Signed-off-by: Bao D. Nguyen <quic_nguyenb@...cinc.com>
Signed-off-by: Can Guo <quic_cang@...cinc.com>
---
drivers/ufs/host/ufs-qcom.c | 22 ++++++++++++++--------
drivers/ufs/host/ufs-qcom.h | 1 +
2 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index aee66a3..cc0eb37 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
struct ufs_pa_layer_attr *dev_req_params)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
- struct ufs_host_params host_params;
+ struct ufs_host_params *host_params = &host->host_params;
int ret = 0;
if (!dev_req_params) {
@@ -908,13 +908,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
switch (status) {
case PRE_CHANGE:
- ufshcd_init_host_param(&host_params);
- host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
-
- /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */
- host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba);
-
- ret = ufshcd_negotiate_pwr_param(&host_params, dev_max_params, dev_req_params);
+ ret = ufshcd_negotiate_pwr_param(host_params, dev_max_params, dev_req_params);
if (ret) {
dev_err(hba->dev, "%s: failed to determine capabilities\n",
__func__);
@@ -1049,6 +1043,17 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH;
}
+static void ufs_qcom_set_host_params(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufs_host_params *host_params = &host->host_params;
+
+ ufshcd_init_host_param(host_params);
+
+ /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */
+ host_params->hs_tx_gear = host_params->hs_rx_gear = ufs_qcom_get_hs_gear(hba);
+}
+
static void ufs_qcom_set_caps(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -1273,6 +1278,7 @@ static int ufs_qcom_init(struct ufs_hba *hba)
ufs_qcom_set_caps(hba);
ufs_qcom_advertise_quirks(hba);
+ ufs_qcom_set_host_params(hba);
err = ufs_qcom_ice_init(host);
if (err)
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 9950a00..ab94c54 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -240,6 +240,7 @@ struct ufs_qcom_host {
struct gpio_desc *device_reset;
+ struct ufs_host_params host_params;
u32 phy_gear;
bool esi_enabled;
--
2.7.4
Powered by blists - more mailing lists