[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20231107155040.1644169-1-hugo@hugovil.com>
Date: Tue, 7 Nov 2023 10:50:40 -0500
From: Hugo Villeneuve <hugo@...ovil.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>
Cc: hugo@...ovil.com, Hugo Villeneuve <hvilleneuve@...onoff.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2] arm64: dts: imx8mn-var-som-symphony: add vcc supply for PCA9534
From: Hugo Villeneuve <hvilleneuve@...onoff.com>
The following warning is shown when probing device:
pca953x 1-0020: supply vcc not found, using dummy regulator
Define a new fixed 3.3v regulator for carrier board peripherals,
enabled by mosfet switch Q2 after the SOM_3V3 supply rises (no software
control).
Add this new regulator as vcc supply to the PCA9534 to silence the warning.
Signed-off-by: Hugo Villeneuve <hvilleneuve@...onoff.com>
---
Changes for V2:
- add peripherals regulator and update commit message for Q2 mosfet.
.../boot/dts/freescale/imx8mn-var-som-symphony.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index a7a57442cb81..a6b94d1957c9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -57,6 +57,15 @@ led {
linux,default-trigger = "heartbeat";
};
};
+
+ /* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */
+ reg_per_3v3: regulator-peripheral-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "per_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
};
ðphy {
@@ -79,6 +88,7 @@ pca9534: gpio@20 {
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
#gpio-cells = <2>;
wakeup-source;
+ vcc-supply = <®_per_3v3>;
/* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
usb3-sata-sel-hog {
base-commit: be3ca57cfb777ad820c6659d52e60bbdd36bf5ff
--
2.39.2
Powered by blists - more mailing lists