linux-kernel - [PATCH v5 4/4] drm/panel-edp: Avoid adding multiple preferred modes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon,  6 Nov 2023 15:51:35 -0800
From:   Hsin-Yi Wang <hsinyi@...omium.org>
To:     Douglas Anderson <dianders@...omium.org>
Cc:     Neil Armstrong <neil.armstrong@...aro.org>,
        Jessica Zhang <quic_jesszhan@...cinc.com>,
        Sam Ravnborg <sam@...nborg.org>,
        Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
        Maxime Ripard <mripard@...nel.org>,
        Thomas Zimmermann <tzimmermann@...e.de>,
        David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
        stable@...r.kernel.org
Subject: [PATCH v5 4/4] drm/panel-edp: Avoid adding multiple preferred modes

If a non generic edp-panel is under aux-bus, the mode read from edid would
still be selected as preferred and results in multiple preferred modes,
which is ambiguous.

If both hard-coded mode and edid exists, only add mode from hard-coded.

Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
---
v4->v5: remove inapplicable comments.
---
 drivers/gpu/drm/panel/panel-edp.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index c0c24d94c3a0..006939cc3fee 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -589,6 +589,7 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 {
 	struct panel_edp *p = to_panel_edp(panel);
 	int num = 0;
+	bool has_hard_coded_modes = p->desc->num_timings || p->desc->num_modes;
 	bool has_override_edid_mode = p->detected_panel &&
 				      p->detected_panel != ERR_PTR(-EINVAL) &&
 				      p->detected_panel->override_edid_mode;
@@ -599,7 +600,11 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 
 		if (!p->edid)
 			p->edid = drm_get_edid(connector, p->ddc);
-		if (p->edid) {
+		/*
+		 * If both edid and hard-coded modes exists, skip edid modes to
+		 * avoid multiple preferred modes.
+		 */
+		if (p->edid && !has_hard_coded_modes) {
 			if (has_override_edid_mode) {
 				/*
 				 * override_edid_mode is specified. Use
@@ -616,12 +621,7 @@ static int panel_edp_get_modes(struct drm_panel *panel,
 		pm_runtime_put_autosuspend(panel->dev);
 	}
 
-	/*
-	 * Add hard-coded panel modes. Don't call this if there are no timings
-	 * and no modes (the generic edp-panel case) because it will clobber
-	 * the display_info that was already set by drm_add_edid_modes().
-	 */
-	if (p->desc->num_timings || p->desc->num_modes)
+	if (has_hard_coded_modes)
 		num += panel_edp_get_non_edid_modes(p, connector);
 	else if (!num)
 		dev_warn(p->base.dev, "No display modes\n");
-- 
2.42.0.869.gea05f2083d-goog