| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e12bffd61450fde2512632e205be5473e450a4e0.camel@collabora.com>
Date: Tue, 07 Nov 2023 21:52:18 -0500
From: Nicolas Dufresne <nicolas.dufresne@...labora.com>
To: Jonas Karlman <jonas@...boo.se>,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>
Cc: Alex Bee <knaerzche@...il.com>,
Benjamin Gaignard <benjamin.gaignard@...labora.com>,
Sebastian Fricke <sebastian.fricke@...labora.com>,
Christopher Obbard <chris.obbard@...labora.com>,
linux-media@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 02/11] media: v4l2: Add NV15 and NV20 pixel formats
Hi,
Le dimanche 05 novembre 2023 à 16:55 +0000, Jonas Karlman a écrit :
> Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for
> 10-bit buffers.
>
> NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to
> NV12 and NV16, using 10-bit components with no padding between each
> component. Instead, a group of 4 luminance/chrominance samples are
> stored over 5 bytes in little endian order:
>
> YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
>
> The '15' and '20' suffix refers to the optimum effective bits per pixel
> which is achieved when the total number of luminance samples is a
> multiple of 8 for NV15 and 4 for NV20.
I had this mostly documented already in September:
https://patchwork.linuxtv.org/project/linux-media/patch/20230914150651.3114134-3-nicolas.dufresne@collabora.com/
https://patchwork.linuxtv.org/project/linux-media/patch/20230914150651.3114134-4-nicolas.dufresne@collabora.com/
I think I was improving a bit the documentation avoiding to repeat what
NV15 (little and big endian) is over and over. I've had no feedback on
V2, so assumed it going to be picked, but then it will certainly
conflict with this change.
>
> Signed-off-by: Jonas Karlman <jonas@...boo.se>
> ---
> v4:
> - No change
>
> v3:
> - Use bpp and bpp_div instead of the misuse of block_w/block_h
> - Update documentation, expand to use full 4x4 sample image
>
> .../media/v4l/pixfmt-yuv-planar.rst | 128 ++++++++++++++++++
> drivers/media/v4l2-core/v4l2-common.c | 2 +
> drivers/media/v4l2-core/v4l2-ioctl.c | 2 +
> include/uapi/linux/videodev2.h | 2 +
> 4 files changed, 134 insertions(+)
>
> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> index 1840224faa41..4366cdcb970e 100644
> --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
> @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component.
> - Cr, Cb
> - Yes
> - Linear
> + * - V4L2_PIX_FMT_NV15
> + - 'NV15'
> + - 10
> + - 4:2:0
> + - Cb, Cr
> + - Yes
> + - Linear
I'd like to see 8 and 10bit formats grouped and not mixed.
> * - V4L2_PIX_FMT_NV12M
> - 'NM12'
> - 8
> @@ -158,6 +165,13 @@ All components are stored with the same number of bits per component.
> - Cr, Cb
> - Yes
> - Linear
> + * - V4L2_PIX_FMT_NV20
> + - 'NV20'
> + - 10
> + - 4:2:2
> + - Cb, Cr
> + - Yes
> + - Linear
> * - V4L2_PIX_FMT_NV16M
> - 'NM16'
> - 8
> @@ -288,6 +302,57 @@ of the luma plane.
> - Cr\ :sub:`11`
>
>
> +.. _V4L2-PIX-FMT-NV15:
> +
> +NV15
> +----
> +
> +Semi-planar 10-bit YUV 4:2:0 format similar to NV12, using 10-bit components
> +with no padding between each component. A group of 4 components are stored over
> +5 bytes in little endian order.
> +
> +.. flat-table:: Sample 4x4 NV15 Image (1 byte per cell)
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * - start + 0:
> + - Y'\ :sub:`00[7:0]`
> + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]`
> + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]`
> + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]`
> + - Y'\ :sub:`03[9:2]`
> + * - start + 5:
> + - Y'\ :sub:`10[7:0]`
> + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]`
> + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]`
> + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]`
> + - Y'\ :sub:`13[9:2]`
> + * - start + 10:
> + - Y'\ :sub:`20[7:0]`
> + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]`
> + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]`
> + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]`
> + - Y'\ :sub:`23[9:2]`
> + * - start + 15:
> + - Y'\ :sub:`30[7:0]`
> + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]`
> + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]`
> + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]`
> + - Y'\ :sub:`33[9:2]`
> + * - start + 20:
> + - Cb\ :sub:`00[7:0]`
> + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]`
> + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]`
> + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]`
> + - Cr\ :sub:`01[9:2]`
> + * - start + 25:
> + - Cb\ :sub:`10[7:0]`
> + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]`
> + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]`
> + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]`
> + - Cr\ :sub:`11[9:2]`
> +
> +
> .. _V4L2-PIX-FMT-NV12MT:
> .. _V4L2-PIX-FMT-NV12MT-16X16:
> .. _V4L2-PIX-FMT-NV12-4L4:
> @@ -500,6 +565,69 @@ number of lines as the luma plane.
> - Cr\ :sub:`32`
>
>
> +.. _V4L2-PIX-FMT-NV20:
> +
> +NV20
> +----
> +
> +Semi-planar 10-bit YUV 4:2:2 format similar to NV16, using 10-bit components
> +with no padding between each component. A group of 4 components are stored over
> +5 bytes in little endian order.
> +
> +.. flat-table:: Sample 4x4 NV20 Image (1 byte per cell)
> + :header-rows: 0
> + :stub-columns: 0
> +
> + * - start + 0:
> + - Y'\ :sub:`00[7:0]`
> + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]`
> + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]`
> + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]`
> + - Y'\ :sub:`03[9:2]`
> + * - start + 5:
> + - Y'\ :sub:`10[7:0]`
> + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]`
> + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]`
> + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]`
> + - Y'\ :sub:`13[9:2]`
> + * - start + 10:
> + - Y'\ :sub:`20[7:0]`
> + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]`
> + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]`
> + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]`
> + - Y'\ :sub:`23[9:2]`
> + * - start + 15:
> + - Y'\ :sub:`30[7:0]`
> + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]`
> + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]`
> + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]`
> + - Y'\ :sub:`33[9:2]`
> + * - start + 20:
> + - Cb\ :sub:`00[7:0]`
> + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]`
> + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]`
> + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]`
> + - Cr\ :sub:`01[9:2]`
> + * - start + 25:
> + - Cb\ :sub:`10[7:0]`
> + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]`
> + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]`
> + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]`
> + - Cr\ :sub:`11[9:2]`
> + * - start + 30:
> + - Cb\ :sub:`20[7:0]`
> + - Cr\ :sub:`20[5:0]`\ Cb\ :sub:`20[9:8]`
> + - Cb\ :sub:`21[3:0]`\ Cr\ :sub:`20[9:6]`
> + - Cr\ :sub:`21[1:0]`\ Cb\ :sub:`21[9:4]`
> + - Cr\ :sub:`21[9:2]`
> + * - start + 35:
> + - Cb\ :sub:`30[7:0]`
> + - Cr\ :sub:`30[5:0]`\ Cb\ :sub:`30[9:8]`
> + - Cb\ :sub:`31[3:0]`\ Cr\ :sub:`30[9:6]`
> + - Cr\ :sub:`31[1:0]`\ Cb\ :sub:`31[9:4]`
> + - Cr\ :sub:`31[9:2]`
> +
> +
> .. _V4L2-PIX-FMT-NV24:
> .. _V4L2-PIX-FMT-NV42:
>
> diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> index 834b426da8b1..c65ffab5800a 100644
> --- a/drivers/media/v4l2-core/v4l2-common.c
> +++ b/drivers/media/v4l2-core/v4l2-common.c
> @@ -270,8 +270,10 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
> /* YUV planar formats */
> { .format = V4L2_PIX_FMT_NV12, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 },
> { .format = V4L2_PIX_FMT_NV21, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 },
> + { .format = V4L2_PIX_FMT_NV15, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 2 },
> { .format = V4L2_PIX_FMT_NV16, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 },
> { .format = V4L2_PIX_FMT_NV61, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 },
> + { .format = V4L2_PIX_FMT_NV20, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 1 },
> { .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 },
> { .format = V4L2_PIX_FMT_NV42, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 },
> { .format = V4L2_PIX_FMT_P010, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 },
> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
> index 9b1de54ce379..937434e5f2c1 100644
> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
> @@ -1347,8 +1347,10 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
> case V4L2_PIX_FMT_YUV48_12: descr = "12-bit YUV 4:4:4 Packed"; break;
> case V4L2_PIX_FMT_NV12: descr = "Y/UV 4:2:0"; break;
> case V4L2_PIX_FMT_NV21: descr = "Y/VU 4:2:0"; break;
> + case V4L2_PIX_FMT_NV15: descr = "10-bit Y/UV 4:2:0 (Packed)"; break;
> case V4L2_PIX_FMT_NV16: descr = "Y/UV 4:2:2"; break;
> case V4L2_PIX_FMT_NV61: descr = "Y/VU 4:2:2"; break;
> + case V4L2_PIX_FMT_NV20: descr = "10-bit Y/UV 4:2:2 (Packed)"; break;
> case V4L2_PIX_FMT_NV24: descr = "Y/UV 4:4:4"; break;
> case V4L2_PIX_FMT_NV42: descr = "Y/VU 4:4:4"; break;
> case V4L2_PIX_FMT_P010: descr = "10-bit Y/UV 4:2:0"; break;
> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
> index c3d4e490ce7c..617340c43e40 100644
> --- a/include/uapi/linux/videodev2.h
> +++ b/include/uapi/linux/videodev2.h
> @@ -638,8 +638,10 @@ struct v4l2_pix_format {
> /* two planes -- one Y, one Cr + Cb interleaved */
> #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
> #define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */
> +#define V4L2_PIX_FMT_NV15 v4l2_fourcc('N', 'V', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit packed */
> #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */
> #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
> +#define V4L2_PIX_FMT_NV20 v4l2_fourcc('N', 'V', '2', '0') /* 20 Y/CbCr 4:2:2 10-bit packed */
Would make sense to group all semi planar 10bit together.
> #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
> #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
> #define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 24 Y/CbCr 4:2:0 10-bit per component */
regards,
Nicolas
Powered by blists - more mailing lists