[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZUs64UHL+vMD0gq4@kuha.fi.intel.com>
Date: Wed, 8 Nov 2023 09:38:09 +0200
From: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To: Badhri Jagan Sridharan <badhri@...gle.com>
Cc: gregkh@...uxfoundation.org, linux@...ck-us.net, kyletso@...gle.com,
linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
stable@...r.kernel.org
Subject: Re: [PATCH v3] usb: typec: tcpm: Fix sink caps op current check
On Wed, Nov 01, 2023 at 01:28:45AM +0000, Badhri Jagan Sridharan wrote:
> TCPM checks for sink caps operational current even when PD is disabled.
> This incorrectly sets tcpm_set_charge() when PD is disabled.
> Check for sink caps only when PD is enabled.
>
> [ 97.572342] Start toggling
> [ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
> [ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected]
> [ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
> [ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
> [ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
> [ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected]
> [ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
> [ 99.903584] VBUS on
> [ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
> [ 99.903600] polarity 1
> [ 99.910155] enable vbus discharge ret:0
> [ 99.910160] Requesting mux state 1, usb-role 2, orientation 2
> [ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
> [ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
> [ 99.946800] Setting voltage/current limit 5000 mV 500 mA
> [ 99.946803] vbus=0 charge:=1
> [ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS]
> [ 100.027145] Setting voltage/current limit 5000 mV 3000 mA
> [ 100.466830] VBUS on
>
> Cc: stable@...r.kernel.org
> Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA")
> Signed-off-by: Badhri Jagan Sridharan <badhri@...gle.com>
Acked-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
> ---
> Changes since v2:
> * Fix the "Fixes" tag
> * Refactor code based on Guenter Roeck's suggestion.
>
> Changes since v1:
> * Fix commit title and description to address comments from Guenter Roeck
> ---
> drivers/usb/typec/tcpm/tcpm.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index 058d5b853b57..afc791ab6d4f 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port)
> current_lim = PD_P_SNK_STDBY_MW / 5;
> tcpm_set_current_limit(port, current_lim, 5000);
> /* Not sink vbus if operational current is 0mA */
> - tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0]));
> + tcpm_set_charge(port, !port->pd_supported ||
> + pdo_max_current(port->snk_pdo[0]));
>
> if (!port->pd_supported)
> tcpm_set_state(port, SNK_READY, 0);
>
> base-commit: c70793fb7632a153862ee9060e6d48131469a29c
> --
> 2.42.0.820.g83a721a137-goog
--
heikki
Powered by blists - more mailing lists