| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20231108104343.24192-16-krzysztof.kozlowski@linaro.org>
Date: Wed, 8 Nov 2023 11:43:41 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Andi Shyti <andi.shyti@...nel.org>,
Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Lee Jones <lee@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Tomasz Figa <tomasz.figa@...il.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Linus Walleij <linus.walleij@...aro.org>,
Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaehoon Chung <jh80.chung@...sung.com>,
Sam Protsenko <semen.protsenko@...aro.org>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-iio@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-pwm@...r.kernel.org,
linux-rtc@...r.kernel.org, linux-serial@...r.kernel.org,
alsa-devel@...a-project.org, linux-sound@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 15/17] arm64: dts: exynos7885: add specific compatibles to several blocks
Exynos7885 reuses several devices from older designs, thus historically
we kept the old (block's) compatible only. This works fine and there is
no bug here, however guidelines expressed in
Documentation/devicetree/bindings/writing-bindings.rst state that:
1. Compatibles should be specific.
2. We should add new compatibles in case of bugs or features.
Add compatibles specific to Exynos7885 in front of all old-SoC-like
compatibles. This will also help reviews of new code using existing
DTS as template. No functional impact on Linux drivers behavior.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/exynos/exynos7885.dtsi | 45 ++++++++++++++--------
1 file changed, 30 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
index d69fc2392bd0..008228fb319a 100644
--- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -172,7 +172,8 @@ soc: soc@0 {
ranges = <0x0 0x0 0x0 0x20000000>;
chipid@...00000 {
- compatible = "samsung,exynos850-chipid";
+ compatible = "samsung,exynos7885-chipid",
+ "samsung,exynos850-chipid";
reg = <0x10000000 0x24>;
};
@@ -264,7 +265,8 @@ pinctrl_alive: pinctrl@...b0000 {
reg = <0x11cb0000 0x1000>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos7-wakeup-eint";
+ compatible = "samsung,exynos7885-wakeup-eint",
+ "samsung,exynos7-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -289,12 +291,14 @@ pinctrl_dispaud: pinctrl@...f0000 {
};
pmu_system_controller: system-controller@...80000 {
- compatible = "samsung,exynos7-pmu", "syscon";
+ compatible = "samsung,exynos7885-pmu",
+ "samsung,exynos7-pmu", "syscon";
reg = <0x11c80000 0x10000>;
};
mmc_0: mmc@...00000 {
- compatible = "samsung,exynos7-dw-mshc-smu";
+ compatible = "samsung,exynos7885-dw-mshc-smu",
+ "samsung,exynos7-dw-mshc-smu";
reg = <0x13500000 0x2000>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -307,7 +311,8 @@ mmc_0: mmc@...00000 {
};
serial_0: serial@...00000 {
- compatible = "samsung,exynos5433-uart";
+ compatible = "samsung,exynos7885-uart",
+ "samsung,exynos5433-uart";
reg = <0x13800000 0x100>;
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
@@ -320,7 +325,8 @@ serial_0: serial@...00000 {
};
serial_1: serial@...10000 {
- compatible = "samsung,exynos5433-uart";
+ compatible = "samsung,exynos7885-uart",
+ "samsung,exynos5433-uart";
reg = <0x13810000 0x100>;
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
@@ -333,7 +339,8 @@ serial_1: serial@...10000 {
};
serial_2: serial@...20000 {
- compatible = "samsung,exynos5433-uart";
+ compatible = "samsung,exynos7885-uart",
+ "samsung,exynos5433-uart";
reg = <0x13820000 0x100>;
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
@@ -346,7 +353,8 @@ serial_2: serial@...20000 {
};
i2c_0: i2c@...30000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13830000 0x100>;
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -359,7 +367,8 @@ i2c_0: i2c@...30000 {
};
i2c_1: i2c@...40000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13840000 0x100>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -372,7 +381,8 @@ i2c_1: i2c@...40000 {
};
i2c_2: i2c@...50000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13850000 0x100>;
interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -385,7 +395,8 @@ i2c_2: i2c@...50000 {
};
i2c_3: i2c@...60000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -398,7 +409,8 @@ i2c_3: i2c@...60000 {
};
i2c_4: i2c@...70000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -411,7 +423,8 @@ i2c_4: i2c@...70000 {
};
i2c_5: i2c@...80000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -424,7 +437,8 @@ i2c_5: i2c@...80000 {
};
i2c_6: i2c@...90000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
@@ -437,7 +451,8 @@ i2c_6: i2c@...90000 {
};
i2c_7: i2c@...d0000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos7885-i2c",
+ "samsung,s3c2440-i2c";
reg = <0x11cd0000 0x100>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
--
2.34.1
Powered by blists - more mailing lists