| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ecf78696-d423-4b44-a842-bc0e57e17182@kwiboo.se>
Date: Thu, 9 Nov 2023 23:47:16 +0100
From: Jonas Karlman <jonas@...boo.se>
To: Nicolas Dufresne <nicolas.dufresne@...labora.com>,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>
Cc: Alex Bee <knaerzche@...il.com>,
Benjamin Gaignard <benjamin.gaignard@...labora.com>,
Sebastian Fricke <sebastian.fricke@...labora.com>,
Christopher Obbard <chris.obbard@...labora.com>,
linux-media@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 02/11] media: v4l2: Add NV15 and NV20 pixel formats
On 2023-11-08 03:52, Nicolas Dufresne wrote:
> Hi,
>
> Le dimanche 05 novembre 2023 à 16:55 +0000, Jonas Karlman a écrit :
>> Add NV15 and NV20 pixel formats used by the Rockchip Video Decoder for
>> 10-bit buffers.
>>
>> NV15 and NV20 is 10-bit 4:2:0/4:2:2 semi-planar YUV formats similar to
>> NV12 and NV16, using 10-bit components with no padding between each
>> component. Instead, a group of 4 luminance/chrominance samples are
>> stored over 5 bytes in little endian order:
>>
>> YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
>>
>> The '15' and '20' suffix refers to the optimum effective bits per pixel
>> which is achieved when the total number of luminance samples is a
>> multiple of 8 for NV15 and 4 for NV20.
>
> I had this mostly documented already in September:
>
> https://patchwork.linuxtv.org/project/linux-media/patch/20230914150651.3114134-3-nicolas.dufresne@collabora.com/
> https://patchwork.linuxtv.org/project/linux-media/patch/20230914150651.3114134-4-nicolas.dufresne@collabora.com/
>
> I think I was improving a bit the documentation avoiding to repeat what
> NV15 (little and big endian) is over and over. I've had no feedback on
> V2, so assumed it going to be picked, but then it will certainly
> conflict with this change.
Sorry, I had completely missed this pending series, sent out a short
comment earlier and will rebase this on top of your series for v5.
>
>>
>> Signed-off-by: Jonas Karlman <jonas@...boo.se>
>> ---
>> v4:
>> - No change
>>
>> v3:
>> - Use bpp and bpp_div instead of the misuse of block_w/block_h
>> - Update documentation, expand to use full 4x4 sample image
>>
>> .../media/v4l/pixfmt-yuv-planar.rst | 128 ++++++++++++++++++
>> drivers/media/v4l2-core/v4l2-common.c | 2 +
>> drivers/media/v4l2-core/v4l2-ioctl.c | 2 +
>> include/uapi/linux/videodev2.h | 2 +
>> 4 files changed, 134 insertions(+)
>>
>> diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
>> index 1840224faa41..4366cdcb970e 100644
>> --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
>> +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst
>> @@ -79,6 +79,13 @@ All components are stored with the same number of bits per component.
>> - Cr, Cb
>> - Yes
>> - Linear
>> + * - V4L2_PIX_FMT_NV15
>> + - 'NV15'
>> + - 10
>> + - 4:2:0
>> + - Cb, Cr
>> + - Yes
>> + - Linear
>
> I'd like to see 8 and 10bit formats grouped and not mixed.
Sure, will fix in v5.
>
>> * - V4L2_PIX_FMT_NV12M
>> - 'NM12'
>> - 8
>> @@ -158,6 +165,13 @@ All components are stored with the same number of bits per component.
>> - Cr, Cb
>> - Yes
>> - Linear
>> + * - V4L2_PIX_FMT_NV20
>> + - 'NV20'
>> + - 10
>> + - 4:2:2
>> + - Cb, Cr
>> + - Yes
>> + - Linear
>> * - V4L2_PIX_FMT_NV16M
>> - 'NM16'
>> - 8
>> @@ -288,6 +302,57 @@ of the luma plane.
>> - Cr\ :sub:`11`
>>
>>
>> +.. _V4L2-PIX-FMT-NV15:
>> +
>> +NV15
>> +----
>> +
>> +Semi-planar 10-bit YUV 4:2:0 format similar to NV12, using 10-bit components
>> +with no padding between each component. A group of 4 components are stored over
>> +5 bytes in little endian order.
>> +
>> +.. flat-table:: Sample 4x4 NV15 Image (1 byte per cell)
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * - start + 0:
>> + - Y'\ :sub:`00[7:0]`
>> + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]`
>> + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]`
>> + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]`
>> + - Y'\ :sub:`03[9:2]`
>> + * - start + 5:
>> + - Y'\ :sub:`10[7:0]`
>> + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]`
>> + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]`
>> + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]`
>> + - Y'\ :sub:`13[9:2]`
>> + * - start + 10:
>> + - Y'\ :sub:`20[7:0]`
>> + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]`
>> + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]`
>> + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]`
>> + - Y'\ :sub:`23[9:2]`
>> + * - start + 15:
>> + - Y'\ :sub:`30[7:0]`
>> + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]`
>> + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]`
>> + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]`
>> + - Y'\ :sub:`33[9:2]`
>> + * - start + 20:
>> + - Cb\ :sub:`00[7:0]`
>> + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]`
>> + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]`
>> + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]`
>> + - Cr\ :sub:`01[9:2]`
>> + * - start + 25:
>> + - Cb\ :sub:`10[7:0]`
>> + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]`
>> + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]`
>> + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]`
>> + - Cr\ :sub:`11[9:2]`
>> +
>> +
>> .. _V4L2-PIX-FMT-NV12MT:
>> .. _V4L2-PIX-FMT-NV12MT-16X16:
>> .. _V4L2-PIX-FMT-NV12-4L4:
>> @@ -500,6 +565,69 @@ number of lines as the luma plane.
>> - Cr\ :sub:`32`
>>
>>
>> +.. _V4L2-PIX-FMT-NV20:
>> +
>> +NV20
>> +----
>> +
>> +Semi-planar 10-bit YUV 4:2:2 format similar to NV16, using 10-bit components
>> +with no padding between each component. A group of 4 components are stored over
>> +5 bytes in little endian order.
>> +
>> +.. flat-table:: Sample 4x4 NV20 Image (1 byte per cell)
>> + :header-rows: 0
>> + :stub-columns: 0
>> +
>> + * - start + 0:
>> + - Y'\ :sub:`00[7:0]`
>> + - Y'\ :sub:`01[5:0]`\ Y'\ :sub:`00[9:8]`
>> + - Y'\ :sub:`02[3:0]`\ Y'\ :sub:`01[9:6]`
>> + - Y'\ :sub:`03[1:0]`\ Y'\ :sub:`02[9:4]`
>> + - Y'\ :sub:`03[9:2]`
>> + * - start + 5:
>> + - Y'\ :sub:`10[7:0]`
>> + - Y'\ :sub:`11[5:0]`\ Y'\ :sub:`10[9:8]`
>> + - Y'\ :sub:`12[3:0]`\ Y'\ :sub:`11[9:6]`
>> + - Y'\ :sub:`13[1:0]`\ Y'\ :sub:`12[9:4]`
>> + - Y'\ :sub:`13[9:2]`
>> + * - start + 10:
>> + - Y'\ :sub:`20[7:0]`
>> + - Y'\ :sub:`21[5:0]`\ Y'\ :sub:`20[9:8]`
>> + - Y'\ :sub:`22[3:0]`\ Y'\ :sub:`21[9:6]`
>> + - Y'\ :sub:`23[1:0]`\ Y'\ :sub:`22[9:4]`
>> + - Y'\ :sub:`23[9:2]`
>> + * - start + 15:
>> + - Y'\ :sub:`30[7:0]`
>> + - Y'\ :sub:`31[5:0]`\ Y'\ :sub:`30[9:8]`
>> + - Y'\ :sub:`32[3:0]`\ Y'\ :sub:`31[9:6]`
>> + - Y'\ :sub:`33[1:0]`\ Y'\ :sub:`32[9:4]`
>> + - Y'\ :sub:`33[9:2]`
>> + * - start + 20:
>> + - Cb\ :sub:`00[7:0]`
>> + - Cr\ :sub:`00[5:0]`\ Cb\ :sub:`00[9:8]`
>> + - Cb\ :sub:`01[3:0]`\ Cr\ :sub:`00[9:6]`
>> + - Cr\ :sub:`01[1:0]`\ Cb\ :sub:`01[9:4]`
>> + - Cr\ :sub:`01[9:2]`
>> + * - start + 25:
>> + - Cb\ :sub:`10[7:0]`
>> + - Cr\ :sub:`10[5:0]`\ Cb\ :sub:`10[9:8]`
>> + - Cb\ :sub:`11[3:0]`\ Cr\ :sub:`10[9:6]`
>> + - Cr\ :sub:`11[1:0]`\ Cb\ :sub:`11[9:4]`
>> + - Cr\ :sub:`11[9:2]`
>> + * - start + 30:
>> + - Cb\ :sub:`20[7:0]`
>> + - Cr\ :sub:`20[5:0]`\ Cb\ :sub:`20[9:8]`
>> + - Cb\ :sub:`21[3:0]`\ Cr\ :sub:`20[9:6]`
>> + - Cr\ :sub:`21[1:0]`\ Cb\ :sub:`21[9:4]`
>> + - Cr\ :sub:`21[9:2]`
>> + * - start + 35:
>> + - Cb\ :sub:`30[7:0]`
>> + - Cr\ :sub:`30[5:0]`\ Cb\ :sub:`30[9:8]`
>> + - Cb\ :sub:`31[3:0]`\ Cr\ :sub:`30[9:6]`
>> + - Cr\ :sub:`31[1:0]`\ Cb\ :sub:`31[9:4]`
>> + - Cr\ :sub:`31[9:2]`
>> +
>> +
>> .. _V4L2-PIX-FMT-NV24:
>> .. _V4L2-PIX-FMT-NV42:
>>
>> diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
>> index 834b426da8b1..c65ffab5800a 100644
>> --- a/drivers/media/v4l2-core/v4l2-common.c
>> +++ b/drivers/media/v4l2-core/v4l2-common.c
>> @@ -270,8 +270,10 @@ const struct v4l2_format_info *v4l2_format_info(u32 format)
>> /* YUV planar formats */
>> { .format = V4L2_PIX_FMT_NV12, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 },
>> { .format = V4L2_PIX_FMT_NV21, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 2 },
>> + { .format = V4L2_PIX_FMT_NV15, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 2 },
>> { .format = V4L2_PIX_FMT_NV16, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 },
>> { .format = V4L2_PIX_FMT_NV61, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 },
>> + { .format = V4L2_PIX_FMT_NV20, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 10, 0, 0 }, .bpp_div = { 4, 4, 1, 1 }, .hdiv = 2, .vdiv = 1 },
>> { .format = V4L2_PIX_FMT_NV24, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 },
>> { .format = V4L2_PIX_FMT_NV42, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 1, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 1, .vdiv = 1 },
>> { .format = V4L2_PIX_FMT_P010, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 2, 2, 0, 0 }, .bpp_div = { 1, 1, 1, 1 }, .hdiv = 2, .vdiv = 1 },
>> diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c
>> index 9b1de54ce379..937434e5f2c1 100644
>> --- a/drivers/media/v4l2-core/v4l2-ioctl.c
>> +++ b/drivers/media/v4l2-core/v4l2-ioctl.c
>> @@ -1347,8 +1347,10 @@ static void v4l_fill_fmtdesc(struct v4l2_fmtdesc *fmt)
>> case V4L2_PIX_FMT_YUV48_12: descr = "12-bit YUV 4:4:4 Packed"; break;
>> case V4L2_PIX_FMT_NV12: descr = "Y/UV 4:2:0"; break;
>> case V4L2_PIX_FMT_NV21: descr = "Y/VU 4:2:0"; break;
>> + case V4L2_PIX_FMT_NV15: descr = "10-bit Y/UV 4:2:0 (Packed)"; break;
>> case V4L2_PIX_FMT_NV16: descr = "Y/UV 4:2:2"; break;
>> case V4L2_PIX_FMT_NV61: descr = "Y/VU 4:2:2"; break;
>> + case V4L2_PIX_FMT_NV20: descr = "10-bit Y/UV 4:2:2 (Packed)"; break;
>> case V4L2_PIX_FMT_NV24: descr = "Y/UV 4:4:4"; break;
>> case V4L2_PIX_FMT_NV42: descr = "Y/VU 4:4:4"; break;
>> case V4L2_PIX_FMT_P010: descr = "10-bit Y/UV 4:2:0"; break;
>> diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
>> index c3d4e490ce7c..617340c43e40 100644
>> --- a/include/uapi/linux/videodev2.h
>> +++ b/include/uapi/linux/videodev2.h
>> @@ -638,8 +638,10 @@ struct v4l2_pix_format {
>> /* two planes -- one Y, one Cr + Cb interleaved */
>> #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */
>> #define V4L2_PIX_FMT_NV21 v4l2_fourcc('N', 'V', '2', '1') /* 12 Y/CrCb 4:2:0 */
>> +#define V4L2_PIX_FMT_NV15 v4l2_fourcc('N', 'V', '1', '5') /* 15 Y/CbCr 4:2:0 10-bit packed */
>> #define V4L2_PIX_FMT_NV16 v4l2_fourcc('N', 'V', '1', '6') /* 16 Y/CbCr 4:2:2 */
>> #define V4L2_PIX_FMT_NV61 v4l2_fourcc('N', 'V', '6', '1') /* 16 Y/CrCb 4:2:2 */
>> +#define V4L2_PIX_FMT_NV20 v4l2_fourcc('N', 'V', '2', '0') /* 20 Y/CbCr 4:2:2 10-bit packed */
>
> Would make sense to group all semi planar 10bit together.
Sure, will fix in v5.
Regards,
Jonas
>
>> #define V4L2_PIX_FMT_NV24 v4l2_fourcc('N', 'V', '2', '4') /* 24 Y/CbCr 4:4:4 */
>> #define V4L2_PIX_FMT_NV42 v4l2_fourcc('N', 'V', '4', '2') /* 24 Y/CrCb 4:4:4 */
>> #define V4L2_PIX_FMT_P010 v4l2_fourcc('P', '0', '1', '0') /* 24 Y/CbCr 4:2:0 10-bit per component */
>
> regards,
> Nicolas
Powered by blists - more mailing lists