linux-kernel - Re: [PATCH v2 1/2] iio: amplifiers: hmc425a: add support for ADRF5740 Attenuator

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <9b9df9a9dec28ff46fef6df1c482e5a09f338891.camel@gmail.com>
Date:   Thu, 09 Nov 2023 08:58:30 +0100
From:   Nuno Sá <noname.nuno@...il.com>
To:     Ana-Maria Cusco <anamaria.cuscoo@...il.com>,
        Ana-Maria Cusco <ana-maria.cusco@...log.com>
Cc:     Lars-Peter Clausen <lars@...afoo.de>,
        Michael Hennerich <Michael.Hennerich@...log.com>,
        Jonathan Cameron <jic23@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-iio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/2] iio: amplifiers: hmc425a: add support for
 ADRF5740 Attenuator

On Tue, 2023-11-07 at 15:21 +0200, Ana-Maria Cusco wrote:
> From: Ana-Maria Cusco <ana-maria.cusco@...log.com>
> 
> This adds support for the Analog Devices ADRF5740 2 dB LSB, 4-Bit,
> Silicon Digital Attenuator, 10 MHz to 60 GHz
> 
> Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@...log.com>
> ---
>  drivers/iio/amplifiers/hmc425a.c | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/drivers/iio/amplifiers/hmc425a.c
> b/drivers/iio/amplifiers/hmc425a.c
> index e87d35d50a95..ed4d72922696 100644
> --- a/drivers/iio/amplifiers/hmc425a.c
> +++ b/drivers/iio/amplifiers/hmc425a.c
> @@ -5,6 +5,7 @@
>   * Copyright 2020 Analog Devices Inc.
>   */
>  
> +#include <linux/bitops.h>
>  #include <linux/device.h>
>  #include <linux/err.h>
>  #include <linux/gpio/consumer.h>
> @@ -22,6 +23,7 @@
>  enum hmc425a_type {
>  	ID_HMC425A,
>  	ID_HMC540S,
> +	ID_ADRF5740
>  };
>  
>  struct hmc425a_chip_info {
> @@ -74,6 +76,10 @@ static int hmc425a_read_raw(struct iio_dev *indio_dev,
>  		case ID_HMC540S:
>  			gain = ~code * -1000;
>  			break;
> +		case ID_ADRF5740:
> +			code = code & BIT(3) ? code & ~BIT(2) : code;
> +			gain = code * -2000;
> +			break;
>  		}
>  
>  		*val = gain / 1000;
> @@ -113,6 +119,10 @@ static int hmc425a_write_raw(struct iio_dev *indio_dev,
>  	case ID_HMC540S:
>  		code = ~((abs(gain) / 1000) & 0xF);
>  		break;
> +	case ID_ADRF5740:
> +		code = (abs(gain) / 2000) & 0xF;
> +		code = code & BIT(3) ? code | BIT(2) : code;
> +		break;
>  	}
>  
>  	mutex_lock(&st->lock);
> @@ -165,6 +175,7 @@ static const struct iio_chan_spec hmc425a_channels[] = {
>  static const struct of_device_id hmc425a_of_match[] = {
>  	{ .compatible = "adi,hmc425a", .data = (void *)ID_HMC425A },
>  	{ .compatible = "adi,hmc540s", .data = (void *)ID_HMC540S },
> +	{ .compatible = "adi,adrf5740", .data = (void *)ID_ADRF5740 },
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, hmc425a_of_match);
> @@ -188,6 +199,15 @@ static struct hmc425a_chip_info hmc425a_chip_info_tbl[] =
> {
>  		.gain_max = 0,
>  		.default_gain = -0x10, /* set default gain -15.0db*/
>  	},
> +	[ID_ADRF5740] = {
> +		.name = "adrf5740",
> +		.channels = hmc425a_channels,
> +		.num_channels = ARRAY_SIZE(hmc425a_channels),
> +		.num_gpios = 4,
> +		.gain_min = -22000,
> +		.gain_max = 0,
> +		.default_gain = 0xF, /* set default gain -22.0db*/
> +	},
>  };
>  
>  static int hmc425a_probe(struct platform_device *pdev)
> @@ -229,6 +249,9 @@ static int hmc425a_probe(struct platform_device *pdev)
>  	indio_dev->info = &hmc425a_info;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
>  
> +	/* Set default gain */
> +	hmc425a_write(indio_dev, st->gain);
> +

This is an unrelated change. It's simple enough to sneak it in but you should at
least mention it in the commit message.


With that,

Reviewed-by: Nuno Sa <nuno.sa@...log.com>