[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20231109131149.46397-3-mihai.sain@microchip.com>
Date: Thu, 9 Nov 2023 15:11:49 +0200
From: Mihai Sain <mihai.sain@...rochip.com>
To: <robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <nicolas.ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <claudiu.beznea@...on.dev>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: <cristian.birsan@...rochip.com>,
Mihai Sain <mihai.sain@...rochip.com>
Subject: [PATCH 2/2] ARM: dts: at91: sam9x60ek: Add IRQ support for ethernet PHY
Add interrupt support for ethernet phy subnode.
Add PB8 definition to macb0 pinctrl.
Signed-off-by: Mihai Sain <mihai.sain@...rochip.com>
---
arch/arm/boot/dts/microchip/at91-sam9x60ek.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
index 5cd593028aff..f3cbb675cea4 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts
@@ -292,6 +292,8 @@ &macb0 {
ethernet-phy@0 {
reg = <0x0>;
+ interrupt-parent = <&pioB>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -465,6 +467,7 @@ AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB4 periph A */
AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */
AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */
AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */
+ AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */
AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */
AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */
};
--
2.42.0
Powered by blists - more mailing lists