Message-ID: <CAL_JsqK64w3+r_LJZoh50PzAUcsvH6ahSDCqgSiKrD3LBAXE9g@mail.gmail.com>
Date:   Thu, 9 Nov 2023 07:51:45 -0600
From:   Rob Herring <robh+dt@...nel.org>
To:     AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...labora.com>
Cc:     Chen-Yu Tsai <wenst@...omium.org>,
        Frank Rowand <frowand.list@...il.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Hsin-Yi Wang <hsinyi@...omium.org>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        andriy.shevchenko@...ux.intel.com, Jiri Kosina <jikos@...nel.org>,
        linus.walleij@...aro.org, broonie@...nel.org,
        gregkh@...uxfoundation.org, hdegoede@...hat.com,
        james.clark@....com, james@...iv.tech, keescook@...omium.org,
        petr.tesarik.ext@...wei.com, rafael@...nel.org, tglx@...utronix.de,
        Jeff LaBundy <jeff@...undy.com>, linux-input@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Douglas Anderson <dianders@...omium.org>,
        Johan Hovold <johan@...nel.org>
Subject: Re: [RFC PATCH v2 0/7] of: Introduce hardware prober driver

On Thu, Nov 9, 2023 at 4:54 AM AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com> wrote:
>
> Il 09/11/23 11:05, Chen-Yu Tsai ha scritto:
> > Hi everyone,
> >
> > This v2 series continues Doug's "of: device: Support 2nd sources of
> > probeable but undiscoverable devices" [1] series, but follows the scheme
> > suggested by Rob, marking all second source component device nodes
> > as "fail-needs-probe-XXX", and having a hardware prober driver enable
> > the one of them. I tried to include everyone from the original Cc: list.
> > Please let me know if you would like to be dropped from future
> > submissions.
> >
> >
> > For the I2C component (touchscreens and trackpads) case from the
> > original series, the hardware prober driver finds the particular
> > class of device in the device tree, gets its parent I2C adapter,
> > and tries to initiate a simple I2C read for each device under that
> > I2C bus. When it finds one that responds, it considers that one
> > present, marks it as "okay", and returns, letting the driver core
> > actually probe the device.
> >
> > This works fine in most cases since these components are connected
> > via ribbon cable and always have the same resources. The driver as
> > implemented currently doesn't deal with regulators or GPIO pins,
> > since in the existing device trees they are either always on for
> > regulators, or have GPIO hogs or pinmux and pinconfig directly
> > tied to the pin controller.
> >
> >
> > Another case this driver could handle is selecting components based
> > on some identifier passed in by the firmware. On Chromebooks we have
> > a SKU ID which is inserted by the bootloader at
> > /firmware/coreboot/sku-id. When a new combination of components is
> > introduced, a new SKU ID is allocated to it. To have SKU ID based
> > device trees, we would need to have one per SKU ID. This ends up
> > increasing the number of device trees we have a lot. The recent
> > MT8186 devices already have 10+10 SKUs [2], with possibly more to come.
> >
> > Instead, we could have just one device tree for each device, with
> > component options listed and marked as "fail-needs-probe-XXX", and
> > let the hardware prober enable one of them based on the given SKU ID.
> > The driver will also fix up OF graph remote endpoints to point to the
> > enabled component.
> >
> > The MT8186 Corsola series [2] can also benefit from this, though I
> > haven't implemented anything yet.
> >
> >
> > Patch 1 adds of_device_is_fail() for the new driver to use.
> >
> > Patch 2 implements the first case, probing the I2C bus for presence
> > of components. This initial version targets the Hana Chromebooks.
> >
> > Patch 3 modifies the Hana device tree and marks the touchscreens
> > and trackpads as "fail-needs-probe-XXX", ready for the driver to
> > probe.
> >
> > Patch 4 adds a missing touchscreen variant to Hana.
> >
> > Patch 5 implements the second case, selectively enabling components
> > based on the SKU ID. This initial version targets the Krane ChromeOS
> > tablet, which has two possible MIPI DSI display panel options.
> >
> > Patch 6 drops Krane's SKU-specific compatible strings from the bindings.
> >
> > Patch 7 merges Krane's SKU-specific device trees into one, with the
> > device tree now containing two possible panels. This unfortunately
> > introduces a dtc warning:
> >
> >      arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dts:81.13-83.6:
> >          Warning (graph_endpoint): /soc/dsi@...14000/panel2@...ort/endpoint:
> >       graph connection to node '/soc/dsi@...14000/ports/port/endpoint'
> >           is not bidirectional
> >
> >
> > Please take a look.
> >
> > Johan, I'm not sure if this works as is for the Lenovo Thinkpad 13S
> > case, since it looks like the trackpad shares the I2C bus with the
> > keyboard.
> >
> >
> > Thanks
> > ChenYu
> >
> >
> > Background as given in Doug's cover letter:
> >
> > Support for multiple "equivalent" sources for components (also known
> > as second sourcing components) is a standard practice that helps keep
> > cost down and also makes sure that if one component is unavailable due
> > to a shortage that we don't need to stop production for the whole
> > product.
> >
> > Some components are very easy to second source. eMMC, for instance, is
> > fully discoverable and probable so you can stuff a wide variety of
> > similar eMMC chips on your board and things will work without a hitch.
> >
> > Some components are more difficult to second source, specifically
> > because it's difficult for software to probe what component is present
> > on any given board. In cases like this software is provided
> > supplementary information to help it, like a GPIO strap or a SKU ID
> > programmed into an EEPROM. This helpful information can allow the
> > bootloader to select a different device tree. The various different
> > "SKUs" of different Chromebooks are examples of this.
> >
> > Some components are somewhere in between. These in-between components
> > are the subject of this patch. Specifically, these components are
> > easily "probeable" but not easily "discoverable".
> >
> > A good example of a probeable but undiscoverable device is an
> > i2c-connected touchscreen or trackpad. Two separate components may be
> > electrically compatible with each other and may have compatible power
> > sequencing requirements but may require different software. If
> > software is told about the different possible components (because it
> > can't discover them), it can safely probe them to figure out which
> > ones are present.
> >
> > On systems using device tree, if we want to tell the OS about all of
> > the different components we need to list them all in the device
> > tree. This leads to a problem. The multiple sources for components
> > likely use the same resources (GPIOs, interrupts, regulators). If the
> > OS tries to probe all of these components at the same time then it
> > will detect a resource conflict and that's a fatal error.
> >
> > The fact that Linux can't handle these probeable but undiscoverable
> > devices well has had a few consequences:
> > 1. In some cases, we've abandoned the idea of second sourcing
> >     components for a given board, which increases cost / generates
> >     manufacturing headaches.
> > 2. In some cases, we've been forced to add some sort of strapping /
> >     EEPROM to indicate which component is present. This adds difficulty
> >     to manufacturing / refurb processes.
> > 3. In some cases, we've managed to make things work by the skin of our
> >     teeth through slightly hacky solutions. Specifically, if we remove
> >     the "pinctrl" entry from the various options then it won't
> >     conflict. Regulators inherently can have more than one consumer, so
> >     as long as there are no GPIOs involved in power sequencing and
> >     probing devices then things can work. This is how
> >     "sc8280xp-lenovo-thinkpad-x13s" works and also how
> >     "mt8173-elm-hana" works.
> >
> > End of background from Doug's cover letter.
>
> I think that using "status" is not a good idea, I find that confusing.

"status" is what defines a device's state in terms of enabled,
present, available. That's exactly what we're expressing here.

Now, I do not think we should be mixing the device class (e.g.
touchscreen) into status. I said this on v1, but apparently that was
not listened to.

>
> Perhaps we could have a node like
>
> something {
>         device-class-one = <&device1>, <&device2>, <&device3>;
>         device-class-two = <&device4>, <&device5>, <&device6>;
> }
>
> so that'd be more or less
>
> hw-prober {
>         trackpads = <&tp1>, <&tp2>;
>         keyboards = <&kb1>, <&kb2>;
>         touchscreens = <&ts1>, <&ts2>;
> }

No. That's more or less what v1 had.

Rob

Powered by blists - more mailing lists