[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4cf3d481-c16d-4b1c-ab45-3ceff80b0b1b@linaro.org>
Date: Fri, 10 Nov 2023 12:10:34 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Drew Fustini <dfustini@...libre.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Jisheng Zhang <jszhang@...nel.org>,
Adrian Hunter <adrian.hunter@...el.com>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Guo Ren <guoren@...nel.org>,
Fu Wei <wefu@...hat.com>, Conor Dooley <conor@...nel.org>
Cc: linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org
Subject: Re: [PATCH v5 5/7] riscv: dts: thead: Add TH1520 mmc controllers and
sdhci clock
On 10/11/2023 06:41, Drew Fustini wrote:
> Add node for the SDHCI fixed clock. Add mmc0 node for the first mmc
> controller instance which is typically connected to the eMMC device.
> Add mmc1 node for the second mmc controller instance which is typically
> connected to microSD slot.
>
> Signed-off-by: Drew Fustini <dfustini@...libre.com>
> ---
> arch/riscv/boot/dts/thead/th1520.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
> index ff364709a6df..f5ec9326c4b8 100644
> --- a/arch/riscv/boot/dts/thead/th1520.dtsi
> +++ b/arch/riscv/boot/dts/thead/th1520.dtsi
> @@ -134,6 +134,13 @@ uart_sclk: uart-sclk-clock {
> #clock-cells = <0>;
> };
>
> + sdhci_clk: sdhci-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <198000000>;
> + clock-output-names = "sdhci_clk";
> + #clock-cells = <0>;
> + };
> +
> soc {
> compatible = "simple-bus";
> interrupt-parent = <&plic>;
> @@ -292,6 +299,22 @@ dmac0: dma-controller@...fc00000 {
> status = "disabled";
> };
>
> + mmc0: mmc@...7080000 {
> + compatible = "thead,th1520-dwcmshc";
> + reg = <0xff 0xe7080000 0x0 0x10000>;
> + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sdhci_clk>;
> + clock-names = "core";
You miss disable in each mmc node.
Best regards,
Krzysztof
Powered by blists - more mailing lists